LV7720JCV-100.0M-T250 [PLETRONICS]
LVDS Output Clock Oscillator,;型号: | LV7720JCV-100.0M-T250 |
厂家: | PLETRONICS, INC. |
描述: | LVDS Output Clock Oscillator, 机械 振荡器 |
文件: | 总9页 (文件大小:1077K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LV77J Series 3.3 V
LVDS Clock Oscillators
February 2017
• Pletronics’ LV77J Series is a quartz crystal
controlled precision square wave generator with
LVDS output.
• Disable function includes low standby power
mode
rd
• 3 Overtone Crystals used
• Improved phase noise performance.
• Tape and Reel or cut tape packaging is available.
• 5 x 7 mm LCC Ceramic Package
• Enable/Disable Function on pad 1
• Improved circuit to minimize oscillator issues
such as multi-mode output signal.
• Low Jitter Product
100 fS Jitter 12.0 KHz to 20.0 MHz @ 156.25 MHz
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.16 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020D.1
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
V
Supply Voltage
-0.3V to +4.0V
CC
Vi
Input Voltage
-0.3V to V + 0.3V
CC
Vo Output Voltage
-0.3V to V + 0.3V
CC
Thermal Characteristics
o
The maximum die or junction temperature is 125 C
o
The thermal resistance junction to board is 30 to 50 C/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2011, Pletronics Inc.
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
Part Number:
LV77 45
J
E
V
-125.0M
-XX
Available
Frequencies:
Packaging code or blank
100.0MHz
106.25MHz
125.0MHz
133.0MHz
156.25MHz
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
Frequency in MHz
Supply Voltage V
CC
V = 3.3V +_ 10%
Optional Enhanced OTR
Contact factory
for other options
o
Blank = Temp. range -10 to +70 C
o
C = Temp. range -20 to +70 C
o
E = Temp. range -40 to +85 C
Series Model
Frequency Stability
45 = _+ 50 ppm
44 = _+ 25 ppm
20 = _+ 20 ppm
Series Model
Part Marking:
PLE LV77
FF.FFF M
C YMDXX
or
LV7XYWWXX
FF.FFF M
C PLE XXX
Marking Legend:
PLE = Pletronics
FF.FFF M = Frequency in MHz
YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day)
All other marking is internal factory codes
Specifications such as frequency stability, supply voltage and operating temperature range, etc. are
not identified from the marking. External packaging labels and packing list will correctly identify the
ordered Pletronics part number.
Codes for Date Code YMD
Code
Year
Code
4
5
6
7
8
A
B
C
D
E
F
G
H
J
K
L
M
Month
2014 2015 2016 2017 2018
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Code
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
U
B
11
V
C
D
13
X
E
14
Y
F
15
Z
G
Day
Code
Day
12
W
28
16
H
J
K
L
M
21
N
P
R
T
17
18
19
20
22
23
24
25
26
27
29
30
31
www.pletronics.com
425-776-1880
2
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
Electrical Specification for 3.30V _+5% over the specified temperature range and
the frequency range of 50 to 175 MHz
Item
Min
-50
-25
-20
Typ Max
Unit
Condition
-
-
-
+50
+25
+20
LVDS
1.6
-
ppm
For all supply voltages, load changes,
aging for 1 year, shock, vibration and
temperatures
Frequency Accuracy “45"
“44"
“20"
Output Waveform
Output High Level
Output Low Level
Output Symmetry
-
0.9
45
-
-
-
V
V
%
-
55
at 50% point of V
(See load circuit)
CC
1
Jitter
0.1
-
pS RMS
12 KHz to 20 MHz from the output
frequency
Output T
and T
-
-
-
-
-
-
-
-
-
0.4
39
150
30
nS
mA
Vth is 20% and 80% of waveform
RISE
FALL
V
CC
Supply Current (I )
CC
Enable/Disable Internal Pull-up
V disable
30
-
Kohm
%Vcc
%Vcc
uA
to V , measured with Pad 1 = 0.0 volts
CC
V enable
70
-10
-
-
Output leakage Current
Enable time
+10
10
mS
Time for output to reach a logic state, the
output frequency is correct at the specified
Start Time.
Disable time
Start up time
-
-
-
-
200
10
nS
Time for output to reach a high Z state
mS
Time for output to reach specified
frequency
o
Operating Temperature Range
-10
-
-
+70
+70
C
Standard Temperature Range
o
- 20
C
Extended Temperature Range “C”
Option
o
- 40
-
+85
C
Extended Temperature Range “E”
Option
o
Storage Temperature Range
-55
-
-
-
+125
15
C
Standby Current I
uA
Pad 1 low, device disabled
CC
1
Jitter computed from phase noise data at 156.25MHz
Specifications with Pad 1 E/D open circuit unless stated otherwise
www.pletronics.com
425-776-1880
3
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
Typical Phase Noise
Phase noise typical at 156.25 MHz
www.pletronics.com
425-776-1880
4
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
Load Circuit
Test Waveform
www.pletronics.com
425-776-1880
5
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
Solderability
Thermal Shock
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
Charged Device Model
1500
1000
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
www.pletronics.com
425-776-1880
6
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
Mechanical:
Inches
mm
A
0.276 _+0.006
7.00 _+0.15
B
C
D
0.197 _+0.006
0.067 max
0.038
5.00 _+0.15
1.80 max
0.96
1
1
E
0.200
5.08
1
F
0.004
0.10
1
G
0.050
1.27
1
H
0.055
1.40
1
I
0.024
0.60
1
1
J
0.004R
0.10R
Not to Scale
Typical dimensions
1
K
0.008R
0.20R
Contacts (pads) :
Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm)
Pad Function
Note
1
Output
When this pad is not connected the oscillator shall operate.
Enable/Disable
When this pad is <0.30 volts, the output will be inhibited (high impedance state.)
Recommend connecting this pad to V if the oscillator is to be always on.
CC
2
3
4
5
6
No connect
Ground (GND)
Output
There is no internal connection to this pad
Both outputs must be terminated and biased for proper operation. The ideal
termination is 50 ohms connected to 2.0V below the Supply Voltage.
Output*
Supply Voltage
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
(V )
CC
Layout and application information
Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable input on
either pad
For Optimum Jitter Performance, Pletronics recommends:
•
•
•
•
a ground plane under the device
no large transient signals (both current and voltage) should be routed under the device
do not layout near a large magnetic field such as a high frequency switching power supply
do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
7
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
Reflow Cycle (typical for lead free processing)
The part may be reflowed 3 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
S1
T
D0
E1
P0
P2
Min
Min
Max
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
_+0.1
4.0
0.6
0.6
0.1
+0.1
-0.0
_+0.1
2.0
_+0.1
Variable Dimensions Table 2
Tape
Size
B1
E2 Min
F
P1
T2
W
Ao, Bo &
Ko
Max
Max
Max
16 mm
12.1
14.25
7.5 _+0.1
8.0 _+0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
inches
7.0
177.8
2.50
63.5
10.0
254.0
13.0
mm
330.2
3.75
95.3
B
inches
4.00
mm
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
8
LV77J Series 3.3 V
PECL Clock Oscillators
February 2017
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
th
19013 36 Ave. West
Fax: 425-776-2760
Lynnwood, WA 98036-5761 USA
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
Copyright © 2006, 2007, 2010, 2011 Pletronics Inc.
www.pletronics.com
425-776-1880
9
相关型号:
LV7744D-FREQ-T250
LVDS Output Clock Oscillator, 1MHz Min, 250MHz Max, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7744DCV-25.0M-T500
LVDS Output Clock Oscillator, 1MHz Min, 325MHz Max, 25MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7744DCV-40.0M-T500
LVDS Output Clock Oscillator, 1MHz Min, 325MHz Max, 40MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7744DCV-50.0M-T1K
LVDS Output Clock Oscillator, 1MHz Min, 325MHz Max, 50MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7744DCV-50.0M-T250
LVDS Output Clock Oscillator, 1MHz Min, 325MHz Max, 50MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7744DCV-53.125M-T250
LVDS Output Clock Oscillator, 1MHz Min, 325MHz Max, 53.125MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
©2020 ICPDF网 联系我们和版权申明