LV7745DEB-FREQ [PLETRONICS]
LVDS Output Clock Oscillator, 1MHz Min, 250MHz Max,;型号: | LV7745DEB-FREQ |
厂家: | PLETRONICS, INC. |
描述: | LVDS Output Clock Oscillator, 1MHz Min, 250MHz Max, |
文件: | 总8页 (文件大小:140K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LV77D Series 2.5 V
LVDS Clock Oscillators
May 2006
• Pletronics’ LV77D Series is a quartz crystal
controlled precision square wave generator
with an LVDS output.
• The package is designed for high density
surface mount designs.
• 1 to 250 MHz
• 5 x 7 mm LCC Ceramic Package
• Enable/Disable Function on pad 1
• Disable function includes low standby power
mode
• Low cost mass produced oscillator.
• Tape and Reel or Tube packaging is available.
• Low Jitter
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.2 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
Vi Input Voltage
Vo Output Voltage
-0.5V to +5.0V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product informatin is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necesarily include testing of all parameters.
Copyright © 2005, 2006, Pletronics Inc.
LV77D Series 2.5 V
LVDS Clock Oscillators
Jan 2006
Part Number:
LV77
45
D
E
W - 125.0M
-XX
Internal code or blank
Frequency in MHz
Supply Voltage VCC
W = 2.5V +_ 10%
Enhanced Specification
E = Temperature range -40 to 85oC
Series Model
Frequency Stability
45 = +_ 50 ppm
44 = +_ 25 ppm
20 = +_ 20 ppm
Series Model
Part Marking:
PLE LV77
FFFFFM
C YMDXX
or
LV7xywwxx
FFFFFM
CPLE xx
Legend:
PLE = Pletronics
FFFFFM = Frequency in MHz
YMD or yww = Date of Manufacture (year-month-day) or year, week, week
All other marking is internal factory codes
Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not
identified from the marking. External packaging labels and packing list will correctly identify the ordered
Pletronics part number.
www.pletronics.com
425-776-1880
2
LV77D Series 2.5 V
LVDS Clock Oscillators
Jan 2006
Electrical Specification for 2.50V +_10% over the specified temperature range
Item
Min
1
Max
250
+50
+25
+20
LVDS
1.60
--
Unit
MHz
ppm
Condition
Frequency Range
Frequency Accuracy “45"
“44"
-50
-25
-20
For all supply voltages, load changes, aging for 1
year, shock, vibration and temperatures
“20"
Output Waveform
Output High Level
Output Low Level
--
0.90
250
--
Volts
Volts
mVolts
mVolts
Volts
Volts
%
See load circuit R1 = 50 ohms
Differential Output (VOD
)
450
50
Differential Output Error (dVOS)
Output Offset Voltage (VOS)
1.125 1.375
1.125 1.500
> 80 MHz
< 80 MHz
See load circuit R1 = 50 ohms
Output Symmetry
45
55
700
900
0.15
2.8
63
Referenced to 50% of amplitude or crossing point
Vth is 20% and 80% of waveform > 80 MHz
Vth is 20% and 80% of waveform < 80 MHz
Measured from 12KHz to 20MHz from Fnominal
Measured from 10Hz to 1MHz from Fnominal
Output TRISE and TFALL
300
pS
400
pS
Jitter
-
pS RMS
-
Vcc Supply Current
-
-
mA
mA
Kohm
Volts
Volts
uA
> 80 MHz
Includes current of properly
terminated device
40
< 80 MHz
Enable/Disable Internal Pull-up
V disable
50
-
-
To Vcc (equivalent resistance)
Referenced to Ground
0.4
-
V enable
2.0
-10
-10
-
Output leakage
V
OUT = VCC
+10
+10
10
Pad 1 low, device disabled
V
OUT = 0V
uA
Enable
nS
Time for output to reach a logic state
Time for output to reach a high Z state
Disable time
Start up time
-
10
nS
-
5
mS
mS
oC
> 80 MHz
Measured from the time
Vcc = 2.2V
-
3
< 80 MHz
Operating Temperature Range
0
+70
+85
+125
3
Standard Temperature Range
-40
-55
-
oC
Extended Temperature Range “E” Option
Storage Temperature Range
Standby Current ICC
oC
uA
Pad 1 low, device disabled > 80 MHz
Pad 1 low, device disabled < 80 MHz
-
1.5
mA
Specifications with Pad 1 E/D open circuit
www.pletronics.com
425-776-1880
3
LV77D Series 2.5 V
LVDS Clock Oscillators
Jan 2006
Typical Phase-Noise Response
0
-20
-40
-60
-80
-100
-120
-140
-160
10
1,000
100,000
10,000,000
Frequency (Hz)
Load Circuit
Test Waveform
Symmetry
Vhigh
Out
80%
50%
20%
Vlow
Out*
Trise
Tfall
Showing Out Measurement only
www.pletronics.com
425-776-1880
4
LV77D Series 2.5 V
LVDS Clock Oscillators
Jan 2006
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
Solderability
Thermal Shock
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
Charged Device Model
1500
1000
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
www.pletronics.com
425-776-1880
5
LV77D Series 2.5 V
LVDS Clock Oscillators
Jan 2006
Mechanical:
Inches
mm
A
0.276 +_0.006
7.00 +_0.15
B
C
0.197 +_0.006
0.063 +_0.012
5.00 +_0.15
1.87 +_0.30
0.96
D1 0.038
E1 0.200
5.08
F1
0.004
0.10
G1 0.050
H1 0.055
1.27
1.40
I1
0.024
0.60
Contacts:
J1
0.004R
0.10R
0.20R
1 Typical dimensions
Not to Scale
Gold 11.8 μinches 0.3 μm minimum over
Nickel 50 to 350 μinches 1.27 to 8.89 μm
K1 0.008R
Pad Function
Note
When this pad is not connected the oscillator shall operate.
1
Output
Enable/Disable
When this pad is <0.30 volts, the output will be inhibited (high impedance state.)
Recommend connecting this pad to VCC if the oscillator is to be always on.
2
3
4
5
6
No connect
Ground (GND)
Output
There is no internal connection to this pad
The outputs must be terminated, 100 ohms between the outputs is the ideal
termination.
Output*
Supply Voltage
(VCC)
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
Layout and application information
Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable on both
input pads
For Optimum Jitter Performance, Pletronics recommends:
• a ground plane under the device
• no large transient signals (both current and voltage) should be routed under the device
• do not layout near a large magnetic field such as a high frequency switching power supply
• do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
6
LV77D Series 2.5 V
LVDS Clock Oscillators
Jan 2006
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
250
215°C±10°C
200
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
Min
S1
Min
T
Max
D0
E1
P0
P2
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
+_0.1
4.0
0.6
0.6
0.1
+0.1
-0.0
_+0.1
2.0
+_0.1
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
14.25
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
7.5 +_0.1
8.0 +_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
mm
7.0
177.8
2.50
63.5
10.0
254.0
13.0
330.2
3.75
95.3
inches
mm
4.00
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
LV77D Series 2.5 V
LVDS Clock Oscillators
Jan 2006
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
Fax: 425-776-2760
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Copyright © 2005, 2006, Pletronics Inc.
www.pletronics.com
425-776-1880
8
相关型号:
LV7745DEV-106.25M
LVDS Output Clock Oscillator, 106.25MHz Nom, LEAD FREE, CREAMIC, LCC, 6 PIN
PLETRONICS
LV7745DEV-125.0
CRYSTAL OSCILLATOR, CLOCK, 125 MHz, LVDS OUTPUT, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7745DEV-200.0M
LVDS Output Clock Oscillator, 200MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7745DEV-25.0M-T1K
LVDS Output Clock Oscillator, 1MHz Min, 325MHz Max, 25MHz Nom, ROHS COMPLIANT, CERAMIC, LCC-6
PLETRONICS
LV7745DEV-250.0M
LVDS Output Clock Oscillator, 1MHz Min, 250MHz Max, 250MHz Nom, LEAD FREE, CREAMIC, LCC, 6 PIN
PLETRONICS
©2020 ICPDF网 联系我们和版权申明