OHM4048052CE003999-19.440M [PLETRONICS]

Oscillator;
OHM4048052CE003999-19.440M
型号: OHM4048052CE003999-19.440M
厂家: PLETRONICS, INC.    PLETRONICS, INC.
描述:

Oscillator

文件: 总6页 (文件大小:109K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
OHM4 Series 5.0V CMOS  
Oven Controlled Oscillators  
May 2008  
• Ovenized quartz crystal high precision square  
wave generator with a CMOS output.  
• Tube packaging is available.  
• 10 to 40 MHz  
• Full Size Thru-Hole DIP package  
• Electronic Frequency Control (EFC) optional  
• Low Jitter - Good phase noise characteristics  
Pletronics Inc. certifies this device is in accordance with the  
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.  
Pletronics Inc. guarantees the device does not contain the following:  
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s  
Weight of the Device: 6.2 grams  
Moisture Sensitivity Level: 1 As defined in J-STD-020C  
Second Level Interconnect code: e1  
Absolute Maximum Ratings:  
Parameter  
Unit  
VCC Supply Voltage  
Vi Input Voltage  
Vo Output Voltage  
-0.5V to +7.0V  
-0.5V to VCC + 0.5V  
-0.5V to VCC + 0.5V  
Reliability: Environmental Compliance  
Parameter  
Vibration  
Condition  
10 to 2000 Hz / 10 g  
Shock  
2000 g, 0.3 mS, ½ sine  
MIL-STD-883 Method 2003  
MIL-STD-883 Method 1011, Condition A  
Solderability  
Thermal Shock  
Product information is current as of publication date. The product conforms  
to specifications per the terms of the Pletronics standard warranty. Production  
processsing does not necessarily include testing of all parameters.  
Copyright © 2007, Pletronics Inc.  
OHM4 Series 5.0V CMOS  
Oven Controlled Oscillators  
May 2008  
Part Number (specification values shown are typical, call for other options):  
OHM4048052  
G
G
010 040  
- 20.00M  
-XX  
Internal code or blank  
Frequency MHZ (standards Shown)  
10.000 12.800 16.000 16.384  
19.440 20.000 32.768 40.000  
Electronic Frequency Control  
000 = No EFC  
030 = _+ 3.0 ppm minimum  
080 = _+ 8.0 ppm minimum  
150 = _+ 15.0 ppm minimum  
999 = _+ 4.0 ppm with 0 to 10K ohm  
Frequency Stability (examples shown here)  
003 = _+ 25 ppb for 0oC to 60oC  
008 = _+ 75 ppb for 0oC to 60oC  
005 = +_ 50 ppb for -20oC to 70oC  
015 = _+ 150 ppb for -20oC to 70oC  
010 = _+ 100 ppb for -40oC to 85oC  
025 = +_ 250 ppb for -40oC to 85oC  
Upper Operating Temperature  
C = 50oC F = 65oC J = 80oC  
D = 55oC G = 70oC K = 85oC  
E = 60oC H = 75oC L = 90oC  
Lower Operating Temperature  
A =10oC D = -5oC G = -20oC J = -30oC  
B = 5oC E = -10oC H = -25oC K = -35oC  
C = 0oC F = -15oC I = -30oC L = -40oC  
Series Model  
Part Marking:  
PLE  
Where:  
fff.fff  
c
= N for no EFC, R for resistor, V for voltage  
= Frequency in MHZ  
OHM4050c  
fff.fff M  
ymdannn  
Ymda  
nnn  
= Date code (Year Month Day plus internal code)  
= Device number  
Standard values are listed, consult Pletronics Inc. for other options. Specifications such as frequency  
stability and operating temperature range, etc. are not identified from the marking. External packaging  
labels and packing list will correctly identify the ordered Pletronics part number.  
Codes for Date Code YMD  
Code  
Year  
6
2006  
7
2007  
8
2008  
9
2009  
0
2010  
1
2011  
2
2012  
Code  
Month  
A
B
C
D
E
F
G
H
J
K
L
M
JAN  
FEB  
MAR  
APR  
MAY  
JUN  
JUL  
AUG  
SEP  
OCT  
NOV  
DEC  
Code  
1
1
2
2
3
3
F
15  
V
4
4
5
5
H
17  
X
29  
6
6
7
7
K
19  
Z
31  
8
8
9
9
A
10  
N
B
11  
P
C
12  
R
Day  
Code  
Day  
Code  
Day  
D
13  
T
E
14  
U
G
16  
W
28  
J
18  
Y
L
20  
M
21  
22  
23  
24  
25  
26  
27  
30  
www.pletronics.com  
425-776-1880  
2
OHM4 Series 5.0V CMOS  
Oven Controlled Oscillators  
May 2008  
Specification for 5.00V _+0.20V over the specified temperature range  
Item  
Min  
10  
Max  
40  
Unit  
MHz  
ppb  
Condition  
Frequency Range  
See list of standard frequencies  
determined by part number  
Frequency Accuracy vs.  
Temperature  
250  
+_ 250  
Frequency Accuracy vs. Supply  
Frequency Accuracy vs. Load  
Frequency Accuracy Short Term  
-100  
-10  
+100  
+10  
ppb  
ppb  
ppb  
ppm  
ppm  
ppm  
for Supply change of 0.2V  
Load change of _+10%  
-0.5  
-0.70  
-4.0  
-4.0  
+0.5  
+0.70  
+4.0  
+4.0  
for periods of 0.1 seconds to 30 seconds  
Aging  
1st Year  
10 Years  
Accumulated for 10 years  
Frequency Control Voltage  
0.5V to 5.0V, determined by part number  
> 47 K ohm  
(positive slope)  
Phase Noise  
Resistance  
-4.0  
+4.0  
ppm  
0 to 10 Kohm, determined by part number  
> 4.7 K ohm  
1 Hz  
10 Hz  
100 Hz  
1,000Hz  
--  
--  
--  
--  
-70  
dBc/Hz  
-100  
-130  
-140  
Warmup  
--  
30  
CMOS  
--  
sec  
within specification after turn on at 0oC  
Output Waveform  
Output High Level  
Output Low Level  
Output Symmetry  
Trise and Tfall  
0.4  
--  
V
V
Below VCC  
See Load Circuit  
Cload = 15 pF  
0.4  
60  
40  
--  
%
at 50% of VCC  
10% to 90% of VCC  
at -20oC  
7
nS  
mA  
mA  
mA  
oC  
Power Supply Current  
--  
110  
70  
--  
at +30oC  
Warmup  
--  
250  
+85  
for 10 seconds maximum  
Operating Temperature Range  
-40  
Part number defines the temperature range to  
meet the accuracy specification  
Storage Temperature Range  
-55  
+125  
oC  
www.pletronics.com  
425-776-1880  
3
OHM4 Series 5.0V CMOS  
Oven Controlled Oscillators  
May 2008  
Load Circuit and Test Waveform  
Symmetry  
Vhigh  
90% * Vcc  
50% * Vcc  
10% * Vcc  
Vlow  
Ground  
Trise  
Tfall  
ESD Rating  
Model  
Minimum Voltage  
Conditions  
Human Body Model  
Charged Device Model  
2000  
2000  
MIL-STD-883 Method 3115  
JESD 22-C101  
Package Labeling  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Courier New  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Arial  
Bar code is 39-Full ASCII  
www.pletronics.com  
425-776-1880  
4
OHM4 Series 5.0V CMOS  
Oven Controlled Oscillators  
May 2008  
PCB Mounting (typical for lead free processing)  
Hand soldering is recommended at 245oC _+ 5oC for 5 seconds maximum per pin  
Mechanical:  
Inches  
mm  
20.3 max  
13.2 max  
8.00 max  
6.35  
A
B
C
0.800 +_0.005  
0.52 +_0.005  
0.315 max  
D1 0.250  
E1 0.020  
0.51  
F1  
0.040 max  
1.0 max  
2.79  
Cover:  
G1 0.110  
Kovar  
Base:  
Kovar  
Electroless Nickel Plated  
1 µinch (25 µm) typical  
Resistance welded to base  
H
I1  
0.300  
0.600  
0.100  
7.62  
Glass to metal sealed leads  
15.24  
Label:  
Pin 7 Connected to case  
J1  
2.53  
Laser Engraved – or –  
Not to scale  
1 Nominal dimension  
White Kapton with Black Letters  
Pin  
Function  
Note  
1
EFC  
10 K ohm to ground –OR– 0.5 to 5.0V control voltage, depends on option ordered.  
Use the 30% value for initial operation  
7
8
Ground (GND)  
Output  
14  
Supply Voltage  
(VCC)  
Recommend connecting appropriate power supply bypass capacitors as close as  
possible.  
Layout and application information  
For Optimum Jitter Performance, Pletronics recommends:  
Minimize air flow over the oscillator  
Stabilize the power supply voltage for best performance.  
www.pletronics.com  
425-776-1880  
5
OHM4 Series 5.0V CMOS  
Oven Controlled Oscillators  
May 2008  
IMPORTANT NOTICE  
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and  
other changes to this product at anytime. PLE reserves the right to discontinue any product or service  
without notice. Customers are responsible for obtaining the latest relevant information before placing  
orders and should verify that such information is current and complete. All products are sold subject to  
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.  
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance  
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE  
deems necessary to support this warranty. Except where mandated by specific contractual documents,  
testing of all parameters of each product is not necessarily performed.  
PLE assumes no liability for application assistance or customer product design. Customers are  
responsible for their products and applications using PLE components. To minimize the risks associated  
with the customer products and applications, customers should provide adequate design and operating  
safeguards.  
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support  
applications, devices or systems or other critical applications that may involve potential risks of death,  
personal injury or severe property or environmental damage. Inclusion of PLE products in such  
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications  
requires the written approval of an appropriate PLE officer. Questions concerning potential risk  
applications should be directed to PLE.  
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE  
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or  
process which PLE product or services are used. Information published by PLE regarding third-party  
products or services does not constitute a license from PLE to use such products or services or a warranty  
or endorsement thereof. Use of such information may require a license from a third party under the  
patents or other intellectual property of the third party, or a license from PLE under the patents or other  
intellectual property of PLE.  
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is  
without alteration and is accompanied by associated warranties, conditions, limitations and notices.  
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not  
responsible or liable for such altered documents.  
Resale of PLE products or services with statements different from or beyond the parameters stated by  
PLE for that product or service voids all express and implied warranties for the associated PLE product or  
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.  
Contacting Pletronics Inc.  
Pletronics Inc.  
Tel: 425-776-1880  
19013 36th Ave. West  
Lynnwood, WA 98036-5761 USA  
Fax: 425-776-2760  
E-mail: ple-sales@pletronics.com  
URL: www.pletronics.com  
Copyright © 2006, 2007, 2008, Pletronics Inc.  
www.pletronics.com  
425-776-1880  
6

相关型号:

PLETRONICS
PLETRONICS

OHM4048052CE003999-40.00M

CMOS Output Clock Oscillator, 40MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED, DIP-14/4
PLETRONICS

OHM4048052CE003999-FREQ

CMOS Output Clock Oscillator, 10MHz Min, 40MHz Max, ROHS COMPLIANT, RESISTANCE WELDED, DIP-14/4
PLETRONICS

OHM4048052CE008000-10.00M

CMOS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED; DIP-14/4
PLETRONICS
PLETRONICS

OHM4048052CE008000-12.80M

CMOS Output Clock Oscillator, 12.8MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED; DIP-14/4
PLETRONICS

OHM4048052CE008000-16.00M

CMOS Output Clock Oscillator, 16MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED; DIP-14/4
PLETRONICS

OHM4048052CE008000-16.384M

CMOS Output Clock Oscillator, 16.384MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED; DIP-14/4
PLETRONICS

OHM4048052CE008000-19.44M

CMOS Output Clock Oscillator, 19.44MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED; DIP-14/4
PLETRONICS

OHM4048052CE008000-20.00M

CMOS Output Clock Oscillator, 20MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED; DIP-14/4
PLETRONICS

OHM4048052CE008000-32.768M

CMOS Output Clock Oscillator, 32.768MHz Nom, ROHS COMPLIANT, RESISTANCE WELDED; DIP-14/4
PLETRONICS