P1100-HC-20.48M [PLETRONICS]
CMOS Output Clock Oscillator,;
| 型号： | P1100-HC-20.48M |
| 厂家： | 
PLETRONICS, INC. |
| 描述： | CMOS Output Clock Oscillator, |
| 文件： | 总1页 (文件大小：248K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
P1145-3S, P1145-HC CMOS Series
P1145-3S: CMOS with Enable/ Disable, P1145-HC without E/D
Full Size (14 Pin DIP) Thru-Hole Metal Clock Oscillator
–
650 kHz 69.999 Mz
Standard Specifications
Overall Frequency Stability
Operating Temperature Range
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
Logic Levels
± 50 PPM, ± 25 PPM, ± 20 PPM over Operating Temperature Rae
°
0 to +70 C is standard, but can be extended to - 40 to +85°C for certfrequene
5.0 volts and 3.3 volts available
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is alsavailable (se Waveform 1)
Logic “1” 90% of Vcc MIN; Logic “0” 10% of VcX
Output Load
Standard load is 15pF (typ. 1 ASIC) maximum, see Test Cirit 3 or 1 (consult factory for heavier loads)
-3S: Enable/Disable Option (E/D) Output enabled when Pin #1 is open or at Logt dled when Pin #1 is at Logic “0”.
Max. Supply Current
Icc (mA) w/ 15pF load
Rise and ll Time
Frequency Range
(MHz)
& Tf (nS) wpF load
3.3V
5.0V
Tycal
3.0
Maximum
4.0
–
0.650 10.000
7
1
–
10.001 25.999
10
15
20
25
0
2
30
35
2.5
2.5
2.5
2.5
3.5
3.5
3.5
3.5
–
26.000 34.999
–
35.000 50.000
–
50.001 69.999
Part Numbing Guide
P11 45 - 3S
V - 60.0M - XXX (Internal Code or blank)
Packaging
Tubes
Series
Frequency in MHz
Frequency Stabilit
45 = ± 50 PM
Supply Voltage (Vcc)
44 = ± 5 PPM
Blank: 5.0V ± 10%
V: 3.3 volts ± 10%
20 20 PPM
Mod
-3S wE/D
C no E/D
Special Specifications (choose all that apply)
Blank: Std Specs ( 0 to +70°C, 40/60% Symmetry)
E: Extended Operating Temperature Range (- 40 to +85°C)
S: 45/55% Symmetry at 50% of Vcc
Cot factory for able frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
equency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
inches (mm)
Mechaca
not to scale
Due to psize and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
0 .200 (5.08)
MAX
0.807 (20.5) MAX
PLETRONICS
0.600 (15.24)
14
0.031 (0.8)
Vcc
OUT
8
7
0.020
(.51)
1
GND
-3S Pin 1 = E/D
-HC Pin 1 = N.C.
0.250 (6.35) MAX
Nov 2006
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
16
Pl tronics, Inc.
相关型号：
©2020 ICPDF网 联系我们和版权申明