PE1145BFY-170.0M [PLETRONICS]
Oscillator, 10MHz Min, 170MHz Max, 170MHz Nom;型号: | PE1145BFY-170.0M |
厂家: | PLETRONICS, INC. |
描述: | Oscillator, 10MHz Min, 170MHz Max, 170MHz Nom |
文件: | 总5页 (文件大小:89K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Pletronics, Inc.
19013 36th Ave. West PO Box 2607 Lynnwood, Washington
T: 1-425-776-1880 F: 1-425-776-2760 E: ple-sales@pletronics.com
www.pletronics.com
98036 U.S.A.
Effective January 1, 2008
PE11xxBY
PE33xxBY
PE37xxBY
Devices are OBSOLETE
This has been discontinued because:
•
•
•
the difficulty of the older design to assemble well in the newer RoHS compliant high
temperature reflow processes.
the cover assembly was not meeting some of the cleaning and assembly needs of the newer
processes.
the components needed to make these parts are no longer available.
This requirement is best met by using a PE99xxDV oscillator and a -3.3V regulator and operating the
device from the 5.0V supply.
Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
Differential PECL Series
Differential PECL Output, Some with Enable/ Disable Function
Available in 9 Different Package/Configurations, See Next Pages
Standard Specifications
Overall Frequency Stability
± 50 PPM, ± 25 PPM, ± 20 PPM over Operating Temperature Range
Operating Temperature Range 0 to +80°C is standard, but can be extended to - 40 to +85°C
Storage Temperature Range
Supply Voltage (Vcc)
Supply Current (Icc)
- 55 to +125°C
3.3 volts ± 5% standard, but 5.0 volts or 2.5 volts also available. See Test Cirucit 5.
< 250 MHz = 90 mA maximum, 250 MHz and above = 100 mA maximum
Output High Level
2.275 V minimum referenced to Ground, Vcc = 3.300V,
0.975 V minimum referenced to termination voltage,
- 1.025 V minimum referenced to Vcc
Output Low Level
1.680 V maximum referenced to Ground, Vcc = 3.300V,
0.380 V maximum referenced to termination voltage,
- 1.620 V maximum referenced to Vcc
Output Symmetry
Output Rise & Fall (Tr & Tf)
Jitter
E/D Internal Pullup
V disable
45/55% referenced to 50% of amplitude
1.0 nS maximum when Vth is 10% and 90% of waveform
1 pS RMS maximum measured from 12 kHz to 20 MHz from Fnominal
50 kohm minimum to Vcc
0.3 Vcc maximum referenced to Ground
V enable
0.7 Vcc minumum referenced to Ground
PE7745D only Output Enable / Disable
High Level Input Current
Low Level Input Current
Output Enable Time
-20 uA maximum at Enable / Disable Pin = 0.7 Vcc
-200 uA maximum at Enable / Disable Pin = 0 V
200 nS maximum at output enable or 1 mS maximum at output enabled and stable
200 nS maximum at output disable
Output Disable Time
Vcc Supply Current disabled < 1 mA. Both outputs are high impedance when disabled.
All other models Output Enable/Disable (E/D)
Output Enable Time
Output Disable Time
When Disabled
100 nS maximum
100 nS maximum
Q Output = Logic Low, QN Output = Logic High. Both Outputs are active
Note 1:
PECL and ECL are identical circuits.
ECL has the most positive pin as ground and is ideally terminated by 50 ohms to - 2.00 V
PECL has the most negative pin as ground and is ideally terminated by 50 ohms to the most (positive voltage less 2.00 V)
Mechanical: See Next Pages
D Package
J Package Replacement
B Package
M Package
Mar 2004
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
1
Pl tronics, Inc.
Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
B Package PECL Series
PE1145T, PE1145B, PE3345B, PE3745B
Differential PECL Output with Enable/ Disable Function, 5.0 Vcc or 3.3 Vcc
–
1.50 MHz
650.00 MHz
6 Pad 14x10x3mm Leadless Surface Mount Clock Oscillator
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
PE11 45 B V - 70.0M - XXX (Internal Code or blank)
Model Series
Frequency in MHz
Special Specifications (choose all that apply)
> 120.0 MHz to 650 MHz (5.0 Vcc)
> 180.0 MHz to 650 MHz (3.3 Vcc)
PE1145T = E/D on pin2
°
E: Extended Operating Temperature Range (- 40 to +85 C)
F: 47.5 /52.5% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts ± 10%
Y: Supply Voltage of 5.0 volts ± 10%
1.5 MHz to 120 MHz (5.0 Vcc)
1.5 MHz to 180 MHz (3.3 Vcc)
Packaging
Tube or
24mm tape,
16mm pitch
Frequency Stability
PE1145B = E/D on pin2, QN on pin 1
PE3345B = E/D on pin 2, QN on pin 5
PE3745B = E/D on pin 1, QN on pin 5
45 = ± 50 PPM
44 = ± 25 PPM
20 = ± 20 PPM
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
not to scale
Solder Pads
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
0.200 (5.08)
5
2
4
3
6
1
4
3
5
6
1
2
0.560 (14.23) MAX
0.125 (3.17)
MAX
0.200 (5.08)
0.055 0 .145
(1.4) (3.68)
PE1145T
PE1145B
PE3345B
PE3745B
PIN SIGNAL
PIN SIGNAL
PIN SIGNAL
PIN SIGNAL
1
2
3
4
5
6
QN OUT
E/D
GND
Q OUT
N.C.
1
2
3
4
5
6
N.C.
E/D
GND
Q OUT
QN OUT
Vcc
1
2
3
4
5
6
N.C.
E/D
GND
Q OUT
QN OUT
Vcc
1
2
3
4
5
6
E/D
N.C.
GND
Q OUT
QN OUT
Vcc
See page 6 for Layout Guidelines
Vcc
> 180.0 MHz to 650.0 MHz (3.3 Vcc)
> 120.0 MHz to 650.0 MHz (5.0 Vcc)
Jun 2004
1.5 MHz to 180.0 MHz (3.3 Vcc)
1.5 MHz to 120.0 MHz (5.0 Vcc)
2A
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
Pl tronics, Inc.
Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
PECL and LVDS Layout Guidelines
'B Pkg'
5 x7
SUGGESTED PCB LAYOUTS
Solder Pad Layout which
accommodates all PECL surface mount
devices
TOP SIDE
BYPASS
0.200 (5.08)
0 .185
(4.7)
0 .087
(2.2)
BOTTOM
SIDE
BYPASS
0.055 0.100
(1.4) (2.54)
The output line should be designed with proper characteristic
impedance. Pletronics recommends laying out for the larger
'B package' with pads long enough to accept the smaller
5 x 7mm device. This permits the best option for alternate
sources of device. Pletronics also recommends connecting
Pin 1 and Pin 2 together on the models with
MULTI
LAYER
BYPASS
Q & QN OUT on pins 4 & 5. This allows
having E/D on either pin 1 or pin 2.
For Optimum Jitter Performance, Pletronics recommends:
A ground plane under the device with any other signals below the ground plane
Minimize other RF signals near device
No large transient signals (both current and voltage) should be routed under the device
Do not layout near a large magnetic field such as a high frequency switching power supply
Do not place near piezoelectric buzzers or mechancial fans
Reflow Cycle for lead free processing
260°C max
10 Seconds max
250
200
150
100
175°C ± 10°C
120 to 160 Seconds
215°C ± 10°C
50 Seconds
T Rise= 4 Degree/second max
Mar 2004
6
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
Pl tronics, Inc.
Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
PECL and LVDS Layout Guidelines Continued
PECL Terminations:
Suggested Terminations for 50 ohm impedance matched termination
Vcc
Vcc
Thevenin Equivalent Termination
R1
Vcc
5.0 V
R1
82 ohm
R2
130 ohm
82 ohm
Vcc
Oscillator
Vcc
Out
Out
Oscillator
3.3 V 130 ohm
2.5 V 249 ohm 61.9 ohm
GND
R2
50 ohm
GND
Vcc - 2.00 V
Simple termination for NON impedance matched termination
Vcc
Vcc
R load
274 ohm
147 ohm
86.6 ohm
Vcc
Oscillator
Out
5.0 V
3.3 V
2.5 V
GND
R load
LVDS Terminations:
Vcc
Vcc
Oscillator
QN Out
Q Out
Design PCB traces for 50 ohm characteristic impedance
100 ohm
GND
Mixed System Power Supply:
To use multiple supply voltages requires level translation. Direct circuit connection is not valid.
PECL
Mixed supply voltages are allowed. No translation is necessary. (ECL is returned to the most positive
supply and this is common to all circuits)
ECL
Mixed supply voltages are allowed. LVDS signal levels are power supply independent.
3.3 V LVDS oscillators properly interface 2.5 V Logic Arrays for example.
LVDS
Mar 2004
6A
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
Pl tronics, Inc.
相关型号:
©2020 ICPDF网 联系我们和版权申明