PE4420JW-100.0M-T250 [PLETRONICS]
XO, Clock,;型号: | PE4420JW-100.0M-T250 |
厂家: | PLETRONICS, INC. |
描述: | XO, Clock, 石英晶振 |
文件: | 总6页 (文件大小:738K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PE44J Series 2.5V
PLETRONICS
PECL Clock Oscillator
Applications
Features
Driving A/Ds, D/As, FPGAs
Pletronics’ PE44J Series is a Quartz crystal controlled
Fibre Channel
Ethernet, GbE, SynchE
Medical
Precision Square Wave Oscillator
PECL Differential Output
Enable/Disable Function on pad 1
Low Jitter
2.5V nominal Supply Voltage
25-175 MHz Frequency Range
Storage Area Networking
COTS
PE44JW
3.20 x 2.50 x 1.00 mm
LCC Ceramic Package
Telecom
PON
Electrical Characteristics
Condition
Parameter
Frequency Range 2
Min
Typ
Max
Unit
25
-
175
MHz
Consult factory for other options
Frequency Stability vs. Temperature 2
± 20 = 20, ± 25 = 44, ± 50 = 45
For all supply voltages, load changes, aging for 1 year at 25°C ± 2°C,
shock, vibration and temperatures
-20
-
-
+50
ppm
°C
Standard range
Extended range C option
Extended range E option
-10
-20
-40
+70
+70
+85
Operating Temperature Range 2
Supply Voltage 1, 2 VCC
Supply Current ICC
Output Waveform
2.375
2.50
2.625
60
Volts
mA
-
-
PECL / ECL
1.550 1.620
0.800 0.880
Output High Level VOH
1.475
Volts
Referenced to Ground
Output Low Level VOL
Output TRISE and TFALL
Start Up Time
Duty Cycle
0.690
Volts
ns
Referenced to Ground
-
-
-
-
-
-
-
0.5
10
Vth is 20% and 80% of waveform
Time for output to reach specified frequency
50% of VCC (See Load Circuit)
ms
%
45
-
55
VDISABLE
0.75
-
Volts
ms
Referenced to ground
VENABLE
1.75
Enable Time
-
-
2
Time for output to reach a logic high state
Disable Time
-
-
-
200
ns
Time for output to reach a high Z state
To VCC, measured with pad 1 = 0.0 volts
Enable/Disable Internal Pull-up
50
-
Kohm
Output Leakage
VOUT = VCC
VOUT = 0V
-10
-10
+10
+10
-
µA
µA
Pad 1 low, device disabled
Standby Current
Jitter
-
-
-
0.1
2.80
-
30
-
-
12 kHz to 20 MHz from the output frequency at 156.25 MHz
10 Hz to 1 MHz from the output frequency
ps
°C
-
Storage Temperature Range
Phase Noise
-55
+125
-64
-98
10 Hz
100 Hz
1 kHz
10 kHz
100 kHz
-
-127
-142
-152
-
dBc/Hz 25°C ± 2°C at 156.25 MHz
Notes: Specifications with Pad 1 E/D open circuit
1 Place an appropriate power supply bypass capacitor next to device for correct operation
2 Specified by part number
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jul 18, 2019 Rev. B
Pg 1
Copyright © 2019, Pletronics Inc. 19013 36th Ave. W, Lynnwood, WA 98036 USA www.pletronics.com 425-776-1880
PE44J Series 2.5V
PECL Clock Oscillator
PLETRONICS
Part Number
Series
Operating
Temperature Range
Supply Voltage
VCC
Frequency in
MHz
Optional
T&R Packaging code
Frequency Stability
Model
PE44
45
J
E
W
- 100.0M
-XX
45 = ± 50 ppm (STD)
44 = ± 25 ppm
20 = ± 20 ppm
Blank = -10 to +70oC (STD)
C = -20 to +70oC
T250 = 250 per Reel
T500 = 500 per Reel
T1K = 1000 per Reel (Std for 1K pcs)
W = 2.5V±5%
25-175 MHz
E = -40 to +85oC
Device Marking
P = Pletronics
FFF.FF P = Frequency in MHz, P for PECL
PFF.FF P
YMDxxx
YMD = Date Code, All other marking is internal codes
Note: Specifications such as frequency stability, supply voltage and operating temperature range, etc. are not identified from marking.
External packaging labels and packing list will correctly identify the ordered Pletronics part number.
Codes for Date Code YMD (Year Month Day)
Code
Year
7
8
9
0
1
Code
A
B
C
D
E
F
G
H
J
K
L
M
2017
2018 2019 2020 2021
JAN FEB MAR APR MAY JUN JUL AUG SEP
OCT NOV DEC
Month
Code
Day
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
U
B
11
V
C
D
13
X
E
14
Y
F
15
Z
G
12
W
28
16
Code
Day
H
J
K
L
M
21
N
P
R
T
17
18
19
20
22
23
24
25
26
27
29
30
31
Package Labeling
Tape and Reel available for quantities of 250 to 1000 per reel, cut tape for < 250. 16mm tape, 8mm pitch.
P/N Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
RoHs Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
Pletronics Inc. certifies this device is in accordance with the RoHS 3 (2015/863) and WEEE 2 (2012/19/EU) directives.
Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.041 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020D
Second Level Interconnect code: e4
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jul 18, 2019 Rev. B
Pg 2
Copyright © 2019, Pletronics Inc. 19013 36th Ave. W, Lynnwood, WA 98036 USA www.pletronics.com 425-776-1880
PE44J Series 2.5V
PECL Clock Oscillator
PLETRONICS
Mechanical Dimensions
Inches
mm
0.126 ± 0.008 3.20 ± 0.20
0.098 ± 0.008 2.50 ± 0.20
A
B
0.035 ± 0.004
0.063
0.9 ± 0.10
1.60
C
D1
E1
F1
0.051
1.30
0.024
0.60
G1
H1
0.024
0.60
0.031
0.80
1 Typical dimensions
Pad Layout mm shown
Disclaimer: Recommended layout shown.
Adjust layout as needed for individual
process requirements.
(Not to Scale)
Contacts (pads): Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm)
Layout
Pad Function
Note
Output
Enable/Disable
The oscillator shall operate when this pad is not connected.
The output will be inhibited (high impedance state) when this pad is logic low.
Recommend connecting this pad to VCC if the oscillator is to be always on.
1
No connect
Ground (GND)
Output
There is no internal connection to this pad. Recommend connecting to pad 1 to permit E/D input on either pad for layout.
2
3
4
5
6
Both outputs must be terminated and biased for proper operation. The ideal termination is 50 ohms connected to 2.0V
below supply voltage
Output*
VCC Supply Voltage
Connect an appropriate power supply bypass capacitor as close as possible to pad 4
For Optimum Jitter Performance, Pletronics recommends:
$
$
$
$
A ground plane under the device
Do not route large transient signals (both current and voltage) under the device
Do not place near a large magnetic field such as a high frequency switching power supply
Do not place near piezoelectric buzzers or mechanical fans
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jul 18, 2019 Rev. B
Pg 3
Copyright © 2019, Pletronics Inc. 19013 36th Ave. W, Lynnwood, WA 98036 USA www.pletronics.com 425-776-1880
PE44J Series 2.5V
PECL Clock Oscillator
PLETRONICS
Electrical Test /Load Circuit
Environmental / ESD Ratings
Reliability: Environmental Compliance
ESD Rating
Parameter
Mechanical Shock
Vibration
Condition
Model
Min. Voltage
Condition
JESD22-A114
Human Body Model
2000V
JESD22-B104
JESD22-B103
IPC J-STD-002
Charged Device Model
Machine Model
500V
200V
JESD 22-C101
JESD22-A115
Solderability
Thermal Shock
MIL-STD-883 Method 1011, Condition A
Absolute Maximum Ratings
Parameter
Unit
Thermal Characteristics:
VCC Supply Voltage
Vi Input Voltage
Vo Output Voltage
-0.5V to +5.0V
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 45 to 65oC/Watt depending on the solder
pads, ground plane and construction of the PCB.
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jul 18, 2019 Rev. B
Pg 4
Copyright © 2019, Pletronics Inc. 19013 36th Ave. W, Lynnwood, WA 98036 USA www.pletronics.com 425-776-1880
PE44J Series 2.5V
PECL Clock Oscillator
PLETRONICS
Reflow Cycle
The part may be reflowed 2 times without degradation
(typical for lead free processing).
Tape and Reel
Tape Constant Dimensions Table 1
Tape
Size
D1
min
S1
T
T1
Do
E1
Po
P2
min max max
2.0
8mm
12mm
16mm
1.0
1.5
1.5
1.5
1.75
4.0
±0.05
2.0
0.6
0.6
0.1
+0.1
-0.0
±0.1 ±0.1
24mm
1.5
±0.1
Tape Variable Dimensions Table 2
Tape
Size
B1
max
E2
min
T2
W
Ao, Bo &
Ko
F
P1
max max
7.5
±0.1
8.0
±0.1
16mm 12.1 14.25
8.0
16.3
Note 1
Dimensions in mm
Drawing Not to scale
Note 1: Embossed cavity to conform to EIA– 481-B
Reel Dimensions (may vary) Table 3
A
B
C
D
Reel
Size
Inches
7.0
mm
Inches
2.50
mm
63.5
101.6
95.3
mm
mm
7
177.8
254.0
330.2
13.0
Tape size +0.4
10
13
10.0
13.0
4.00
+0.5
-0.2
+2.0
-0.0
3.75
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jul 18, 2019 Rev. B
Pg 5
Copyright © 2019, Pletronics Inc. 19013 36th Ave. W, Lynnwood, WA 98036 USA www.pletronics.com 425-776-1880
PE44J Series 2.5V
PECL Clock Oscillator
PLETRONICS
Important Notice
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other
changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice.
Customers are responsible for obtaining the latest relevant information before placing orders and should verify that
such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale
supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with
PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary
to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of
each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are responsible for
their products and applications using PLE components. To minimize the risks associated with the customer
products and applications, customers should provide adequate design and operating safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, weapons, weapon systems or space applications, devices or systems or other critical applications
that may involve potential risks of death, personal injury or severe property or environmental damage. Inclusion of
PLE products in such applications is understood to be fully at the risk of the customer. Use of PLE products in such
applications requires the written approval of an appropriate PLE officer. Questions concerning potential risk appli-
cations should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent
right, copyright, artwork or other intellectual property right relating to any combination, machine or process which
PLE product or services are used. Information published by PLE regarding third-party products or services does
not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of
such information may require a license from a third party under the patents or other intellectual property of the third
party, or a license from PLE under the patents or other intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without
alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this
information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such
altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that
product or service voids all express and implied warranties for the associated PLE product or service and is an
unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics, Inc.
Tel: 425.776.1880
19013 36th Ave. West
Lynnwood, WA 98036-5761
U.S.A.
Fax: 425.776.2760
email: ple-sales@pletronics.com
URL: www.pletronics.com
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jul 18, 2019 Rev. B
Pg 6
Copyright © 2019, Pletronics Inc. 19013 36th Ave. W, Lynnwood, WA 98036 USA www.pletronics.com 425-776-1880
相关型号:
PE4421
SMA Female Bulkhead Connector Clamp/Solder Attachment For RG178, RG196, .235 inch D Hole
PASTERNACK
PE44210
SMA Male Connector Solder Attachment 0.042 inch End Launch PCB, .020 inch x .010 inch Contact
PASTERNACK
PE44211
SMA Female Bulkhead Connector Solder Attachment 0.042 inch End Launch PCB, .250 inch Diameter, .030 inch Diameter
PASTERNACK
PE44212
SMA Female Bulkhead Connector Solder Attachment 0.062 inch End Launch PCB, .250 inch Diameter, .030 inch Diameter
PASTERNACK
PE44213
SMA Female Bulkhead Connector Solder Attachment 0.042 inch End Launch PCB, .250 inch Diameter, .020 inch x .010 inch Contact
PASTERNACK
PE44214
SMA Female Bulkhead Connector Solder Attachment 0.062 inch End Launch PCB, .250 inch Diameter, .020 inch x .010 inch Contact
PASTERNACK
PE44217
2.4mm Female Connector Solder Attachment 2 Hole Flange Mount Pin Terminal, .481 inch Hole Spacing
PASTERNACK
PE44218
2.4mm Female Connector Solder Attachment 4 Hole Flange Pin Terminal, .340 inch Hole Spacing
PASTERNACK
PE4422
SMA Female Bulkhead Connector Crimp/Solder (Captive Contact) Attachment For RG316, RG174, RG188, .235 inch D Hole
PASTERNACK
©2020 ICPDF网 联系我们和版权申明