SM4445JW-135.0M [PLETRONICS]
CMOS Output Clock Oscillator;型号: | SM4445JW-135.0M |
厂家: | PLETRONICS, INC. |
描述: | CMOS Output Clock Oscillator |
文件: | 总8页 (文件大小:958K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
• Pletronics’ SM44J Series is a quartz crystal
controlled precision square wave generator with a
CMOS output.
• 40 to 135 MHz
• 2.5 x 3.2 mm LCC Ceramic Package
• Enable/Disable Function
• The package is designed for high density surface
mount designs.
• Disable function includes low standby power
mode
rd
• 3 Overtone Crystals used
• This is a low cost mass produced oscillator.
• Tape and Reel or cut tape packaging is available.
• Low Jitter
P R E L I M I N A R Y
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.041 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
V
Supply Voltage
-0.3V to +4.0V
CC
Vi
Input Voltage
-0.3V to V + 0.3V
CC
Vo Output Voltage
-0.3V to V + 0.3V
CC
Io Output Current
+20 mA to -20 mA
Thermal Characteristics
o
The maximum die or junction temperature is 125 C
o
The thermal resistance junction to board is 40 to 60 C/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2010, Pletronics Inc.
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
Part Number:
SM44
45
J
E
W
- 75.0M
-XX
Packaging code or blank
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
Frequency in MHz
Supply Voltage V
CC
V = 2.5V _+ 10%
Temperature Range
o
Blank = Temp. range -10 to +70 C
o
C = Temp. range -20 to +70 C
o
E = Temp. range -40 to +85 C
Series Model
Frequency Stability
45 = _+ 50 ppm
44 = _+ 25 ppm
20 = _+ 20 ppm
Series Model
Part Marking:
Marking legend:
P
= Pletronics
FF.FFF
YMD or YM
= Frequency in MHz
= Date of Manufacture (year
and month, or year-month-
day)
PFF.FFM
or PFF.FFM
CYMxxx
CYMDxx
All other markings are internal factory codes
Specifications such as frequency stability, supply voltage and operating temperature range, etc. are
not identified from the marking. External packaging labels and packing list will correctly identify the
ordered Pletronics part number.
Codes for Date Code YMD
Code
Year
Code
3
4
5
6
7
A
B
C
D
E
F
G
H
J
K
L
M
Month
2013 2014 2015 2016 2017
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Code
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
U
B
11
V
C
D
13
X
E
14
Y
F
15
Z
G
Day
Code
Day
12
W
28
16
H
J
K
L
M
21
N
P
R
T
17
18
19
20
22
23
24
25
26
27
29
30
31
www.pletronics.com
425-776-1880
2
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
Electrical Specification for 2.50V _+10% over the specified temperature range
Item
Min
40
Typ
Max
135
+50
+25
+20
Unit
MHz
ppm
Condition
Frequency Range
Frequency Accuracy
“45"
“44"
“20"
-50
-25
-20
For all supply voltages, load changes,
aging for 1 year, shock, vibration and
temperatures
Output Waveform
Output High Level
Output Low Level
Output Symmetry
Phase Noise
CMOS
V -0.4
CC
-
0.4
55
-
V
V
-
45
%
at 50% point of V
(See load circuit)
CC
o
at 25 C, 125 MHz typical
10 Hz
100 Hz
1 kHz
-
-78
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Kohm
%
-
-107
-132
-144
-151
-155
-158
-
-
-
10 kHz
100 kHz
1 MHz
-
-
-
-
-
-
10 MHz
-
-
Enable/Disable Internal Pull-up
30
-
-
to V
CC
V disable
30
-
of V applied to pad 1
CC
V enable
70
-10
-10
-
%
Output leakage
V
OUT
= V
+10
+10
10
200
10
uA
Pad 1 low, device disabled
CC
V
OUT
= 0V
uA
Standby Current I
uA
CC
Disable time
-
nS
Time for output to reach a high Z state
Start up time
-
mS
Time for output to reach specified
frequency
o
Operating Temperature
Range
-10
-20
-40
-55
-
+70
+70
+85
+125
15
C
Standard Temperature Range
o
C
Extended Temperature Range “C”
Extended Temperature Range “E”
o
C
o
Storage Temperature Range
Output Load Capacitance (Cl)
C
pF
A 0.01 nF or larger capacitor mounted proximal to the device between Vcc and Vss is required.
www.pletronics.com
425-776-1880
3
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
Electrical Specification for 2.50V _+10% over the specified temperature range
Item
Min
Typ
Max
Unit
Condition
Output T
and T
-
1.0
2.0
nS
C
LOAD
= 15 pF
RISE
FALL
10% to 90% of V
See Load Circuit
CC
V
CC
Supply Current
-
-
-
-
-
-
3.0
3.0
4.0
4.5
5.5
9.0
6.0
6.0
mA
mA
mA
mA
mA
mA
50 MHz
65 MHz
85 MHz
100 MHz
133 MHz
170 MHz
no load
(I )
CC
8.0
8.5
10.5
18.0
Specifications with Pad 1 E/D open circuit
www.pletronics.com
425-776-1880
4
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
Load Circuit and Test Waveform
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
Solderability
Thermal Shock
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
Charged Device Model
1500
1000
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
www.pletronics.com
425-776-1880
5
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
Mechanical:
Inches
mm
A
0.125 _+0.006
3.20 _+0.15
B
C
D
0.098 _+0.006
0.041 _+0.004
0.008
2.50 _+0.15
1.05 _+0.10
0.20R
1
1
E
0.030
0.75
1
F
0.004
0.10
1
G
0.037
0.95
Not to Scale
1
Typical dimensions
Contacts :
Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm)
Pad
Function
Note
1
Output
When this pad is not connected the oscillator shall operate.
Enable/Disable
When this pad is logic low the output will be inhibited (high impedance state.)
Recommend connecting this pad to V if the oscillator is to be always on.
CC
2
3
4
Ground (GND)
Output
Supply Voltage
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
(V )
CC
Layout and application information
For Optimum Jitter Performance, Pletronics recommends:
•
•
•
•
a ground plane under the device
no large transient signals (both current and voltage) should be routed under the device
do not layout near a large magnetic field such as a high frequency switching power supply
do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
6
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
Reflow Cycle (typical for lead free processing)
The part may be reflowed 3 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
S1
T
D0
E1
P0
P2
Min
Min
Max
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
_+0.1
4.0
0.6
0.6
0.1
+0.1
-0.0
_+0.1
2.0
_+0.1
Variable Dimensions Table 2
Tape
Size
B1
E2 Min
F
P1
T2
W
Ao, Bo &
Ko
Max
Max
Max
16 mm
12.1
14.25
7.5 _+0.1
8.0 _+0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
inches
7.0
177.8
2.50
63.5
10.0
254.0
13.0
mm
330.2
3.75
95.3
B
inches
4.00
mm
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
SM44J Series 2.5 V
CMOS Clock Oscillators
April 2015
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
th
19013 36 Ave. West
Fax: 425-776-2760
Lynnwood, WA 98036-5761 USA
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
Copyright © 2007, 2008, 2009, 2010 Pletronics Inc.
www.pletronics.com
425-776-1880
8
相关型号:
©2020 ICPDF网 联系我们和版权申明