SM5544TEV-0.8M-T500 [PLETRONICS]

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 0.8MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4;
SM5544TEV-0.8M-T500
型号: SM5544TEV-0.8M-T500
厂家: PLETRONICS, INC.    PLETRONICS, INC.
描述:

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 0.8MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4

文件: 总8页 (文件大小:960K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
• Pletronics’ SM55 Series is a quartz crystal  
controlled precision square wave generator with a  
CMOS output.  
• 0.8 to 160 MHz  
• 3.2 x 5 mm LCC Ceramic Package  
• Enable/Disable Function  
• Disable function includes low standby power  
mode  
• The package is designed for high density surface  
mount designs.  
rd  
• Fundamental or 3 Overtone Crystals used  
• This is a low cost mass produced oscillator.  
• Tape and Reel or cut tape packaging is available.  
• Low Jitter  
Pletronics Inc. certifies this device is in accordance with the  
RoHS 6/6 (2011/65/EC) and WEEE (2002/96/EC) directives.  
Pletronics Inc. guarantees the device does not contain the following:  
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s  
Weight of the Device: 0.064 grams  
Moisture Sensitivity Level: 1 As defined in J-STD-020C  
Second Level Interconnect code: e4  
Absolute Maximum Ratings:  
Parameter  
Unit  
V
Supply Voltage  
-0.5V to +7.0V  
CC  
Vi  
Input Voltage  
-0.5V to V + 0.5V  
CC  
Vo Output Voltage  
-0.5V to V + 0.5V  
CC  
Io Output Current  
+25 mA to -25 mA  
Thermal Characteristics  
o
The maximum die or junction temperature is 155 C  
o
The thermal resistance junction to board is 30 to 50 C/Watt depending on the solder pads, ground plane  
and construction of the PCB.  
Product information is current as of publication date. The product conforms  
to specifications per the terms of the Pletronics standard warranty. Production  
processsing does not necessarily include testing of all parameters.  
Copyright © 2018 Pletronics Inc.  
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
Part Number:  
SM55  
45  
T
E
V
- 75.0M  
-XX  
Packaging code or blank  
T250 = 250 per Tape and Reel  
T500 = 500 per Tape and Reel  
T1K = 1000 per Tape and Reel  
Frequency in MHz  
Supply Voltage V  
CC  
V = 3.3V _+ 10%  
Optional Enhanced OTR  
o
Blank = Temp. range -10 to +70 C  
o
C = Temp. range -20 to +70 C  
o
E = Temp. range -40 to +85 C  
Series Model  
Frequency Stability  
45 = _+ 50 ppm  
44 = _+ 25 ppm  
20 = _+ 20 ppm  
Series Model  
Part Marking and Legend:  
PLE SM55  
ff.fff M  
5xYWWxx  
P fff.f M  
C YMDxx  
P ff.fff M  
C YYWWxx  
P ff.fff M  
C YMDxx  
P5xYWWx  
ff.fff M  
C ff.fff M  
C YMDxx  
C PLExx  
P or PLE  
ff.fff M or ff.ff M  
= Pletronics  
= Frequency in MHz  
YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day)  
All other marking is internal factory codes  
Specifications such as frequency stability, supply voltage and operating temperature range, etc. are  
not identified from the marking. External packaging labels and packing list will correctly identify the  
ordered Pletronics part number.  
Codes for Date Code YMD  
Code  
Year  
Code  
6
7
8
9
0
A
B
C
D
E
F
G
H
J
K
L
M
Month  
2016 2017 2018 2019 2020  
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC  
Code  
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10  
U
B
11  
V
C
D
13  
X
E
14  
Y
F
15  
Z
G
Day  
Code  
Day  
12  
W
28  
16  
H
J
K
L
M
21  
N
P
R
T
17  
18  
19  
20  
22  
23  
24  
25  
26  
27  
29  
30  
31  
www.pletronics.com  
425-776-1880  
2
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
Electrical Specification for 3.30V _+10% over the specified temperature range  
Item  
Min  
0.8  
-50  
-25  
-20  
Max  
160  
+50  
+25  
+20  
CMOS  
-
Unit  
MHz  
ppm  
Condition  
Frequency Range  
Frequency Accuracy 45"  
44"  
For all supply voltages, load changes, aging for 1  
year, shock, vibration and temperatures  
20"  
Output Waveform  
Output High Level  
Output Low Level  
Output Symmetry  
Jitter  
90  
-
45  
-
%
%
%
of V  
(See load circuit)  
CC  
10  
55  
at 50% point of V  
(See load circuit)  
CC  
0.6  
2.5  
-
pS RMS 12 KHz to 20 MHz from the output frequency  
pS RMS 10 Hz to 1 MHz from the output frequency  
Kohm to V  
%
-
Enable/Disable Internal Pull-up  
V disable  
50  
-
CC  
30  
of V applied to pad 1  
CC  
V enable  
70  
-10  
-10  
-
-
%
Output leakage  
V
OUT  
= V  
+10  
+10  
3
uA  
uA  
uA  
nS  
nS  
mS  
Pad 1 low, device disabled  
CC  
V
OUT  
= 0V  
Standby Current I  
CC  
Enable time  
-
100  
100  
3
Time for output to reach a logic state  
Time for output to reach a high Z state  
Time for output to reach specified frequency  
Standard Temperature Range  
Disable time  
-
Start up time  
-
o
Operating Temperature Range  
-10  
-20  
-40  
-55  
+70  
+70  
+85  
+125  
C
o
C
Extended Temperature Range C” Option  
Extended Temperature Range E” Option  
o
C
o
Storage Temperature Range  
C
Typical phase noise  
plot for 5  
oscillators at  
different output  
frequencies.  
www.pletronics.com  
425-776-1880  
3
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
Electrical Specification for 3.30V _+10% over the specified temperature range  
Item  
Typ  
Max  
5
Unit  
nS  
Condition  
Output T  
and T  
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
< 35 MHz  
C
LOAD  
= 15 pF  
RISE  
FALL  
10% to 90% of V  
CC  
3
nS  
> 35 MHz and < 70 MHz  
> 70 MHz and < 110 MHz  
> 110 MHz  
See Load Circuit  
2.5  
2
nS  
nS  
8
nS  
< 35 MHz  
C
LOAD  
=30 pF  
10% to 90% of V  
CC  
5
nS  
> 35 MHz and < 70 MHz  
> 70 MHz and < 110 MHz  
> 110 MHz  
See Load Circuit  
3
nS  
2
nS  
V
CC  
Supply Current (I )  
CC  
9
mA  
mA  
mA  
mA  
mA  
mA  
mA  
mA  
mA  
mA  
mA  
mA  
< 8 MHz  
C
LOAD  
= 15 pF  
11  
17  
26  
50  
70  
12  
16  
22  
35  
57  
90  
> 8 MHz and < 16 MHz  
> 16 MHz and < 35 MHz  
> 35 MHz and <70 MHz  
> 70 MHz and < 110 MHz  
> 110 MHz  
< 8 MHz  
C
LOAD  
= 30 pF  
> 8 MHz and < 16 MHz  
> 16 MHz and < 35 MHz  
> 35 MHz and <70 MHz  
> 70 MHz and < 110 MHz  
> 110 MHz  
Specifications with Pad 1 E/D open circuit  
www.pletronics.com  
425-776-1880  
4
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
Load Circuit and Test Waveform  
Reliability: Environmental Compliance  
Parameter  
Condition  
Mechanical Shock  
Vibration  
Solderability  
Thermal Shock  
MIL-STD-883 Method 2002, Condition B  
MIL-STD-883 Method 2007, Condition A  
MIL-STD-883 Method 2003  
MIL-STD-883 Method 1011, Condition A  
ESD Rating  
Model  
Minimum Voltage  
Conditions  
Human Body Model  
Charged Device Model  
1500  
1000  
MIL-STD-883 Method 3115  
JESD 22-C101  
Package Labeling  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Courier New  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Arial  
Bar code is 39-Full ASCII  
www.pletronics.com  
425-776-1880  
5
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
Mechanical:  
Inches  
mm  
A
0.197 _+0.006  
5.00 _+0.15  
B
C
D
0.126 _+0.006  
0.052 max  
0.048  
3.20 _+0.15  
1.30 max  
1.23  
1
1
E
0.100  
2.54  
1
F
0.004  
0.10  
1
G
0.050  
1.27  
1
H
0.055  
1.40  
1
I
0.024  
0.60  
1
J
0.004  
0.10R  
Not to Scale  
1
1
K
0.008  
0.020R  
Typical dimensions  
Contacts :  
Gold 11.8 to 32.7 µinches (0.3 to 0.83 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm)  
Pad  
Function  
Note  
1
Output  
When this pad is not connected the oscillator shall operate.  
Enable/Disable  
When this pad is logic low the output will be inhibited (high impedance state.)  
Recommend connecting this pad to V if the oscillator is to be always on.  
CC  
2
3
4
Ground (GND)  
Output  
Supply Voltage  
Recommend connecting appropriate power supply bypass capacitors as close as  
possible.  
(V )  
CC  
Layout and application information  
For Optimum Jitter Performance, Pletronics recommends:  
a ground plane under the device  
no large transient signals (both current and voltage) should be routed under the device  
do not layout near a large magnetic field such as a high frequency switching power supply  
do not place near piezoelectric buzzers or mechanical fans.  
www.pletronics.com  
425-776-1880  
6
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
Reflow Cycle (typical for lead free processing)  
The part may be reflowed 3 times without degradation.  
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250  
Constant Dimensions Table 1  
T1  
Max  
Tape  
Size  
D1  
S1  
T
D0  
E1  
P0  
P2  
Min  
Min  
Max  
8mm  
12mm  
16mm  
24mm  
1.0  
1.5  
1.5  
1.5  
2.0  
_+0.05  
1.5  
1.75  
_+0.1  
4.0  
0.6  
0.6  
0.1  
+0.1  
-0.0  
_+0.1  
2.0  
_+0.1  
Variable Dimensions Table 2  
Tape  
Size  
B1  
E2 Min  
F
P1  
T2  
W
Ao, Bo &  
Ko  
Max  
Max  
Max  
16 mm  
12.1  
14.25  
7.5 _+0.1  
8.0 _+0.1  
8.0  
16.3  
Note 1  
Note 1: Embossed cavity to conform to EIA-481-B  
Dimensions in mm  
Not to scale  
REEL DIMENSIONS  
A
inches  
7.0  
177.8  
2.50  
63.5  
10.0  
254.0  
13.0  
mm  
330.2  
3.75  
95.3  
B
inches  
4.00  
mm  
101.6  
Tape  
Width  
C
D
mm  
13.0 +0.5 / -0.2  
mm  
16.4  
+2.0  
-0.0  
16.4  
+2.0  
-0.0  
16.4  
+2.0  
-0.0  
16.0  
Reel dimensions may vary from the above  
www.pletronics.com  
425-776-1880  
7
SM55T Series 3.3 V  
CMOS Clock Oscillators  
November 2018  
IMPORTANT NOTICE  
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and  
other changes to this product at anytime. PLE reserves the right to discontinue any product or service  
without notice. Customers are responsible for obtaining the latest relevant information before placing  
orders and should verify that such information is current and complete. All products are sold subject to  
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.  
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance  
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE  
deems necessary to support this warranty. Except where mandated by specific contractual documents,  
testing of all parameters of each product is not necessarily performed.  
PLE assumes no liability for application assistance or customer product design. Customers are  
responsible for their products and applications using PLE components. To minimize the risks associated  
with the customer products and applications, customers should provide adequate design and operating  
safeguards.  
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support  
applications, weapons, weapon systems or space applications, devices or systems or other critical  
applications that may involve potential risks of death, personal injury or severe property or environmental  
damage. Inclusion of PLE products in such applications is understood to be fully at the risk of the  
customer. Use of PLE products in such applications requires the written approval of an appropriate PLE  
officer. Questions concerning potential risk applications should be directed to PLE.  
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE  
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or  
process which PLE product or services are used. Information published by PLE regarding third-party  
products or services does not constitute a license from PLE to use such products or services or a  
warranty or endorsement thereof. Use of such information may require a license from a third party under  
the patents or other intellectual property of the third party, or a license from PLE under the patents or other  
intellectual property of PLE.  
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is  
without alteration and is accompanied by associated warranties, conditions, limitations and notices.  
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not  
responsible or liable for such altered documents.  
Resale of PLE products or services with statements different from or beyond the parameters stated by  
PLE for that product or service voids all express and implied warranties for the associated PLE product or  
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.  
Contacting Pletronics Inc.  
Pletronics Inc.  
Tel: 425-776-1880  
th  
19013 36 Ave. West  
Fax: 425-776-2760  
Lynnwood, WA 98036-5761 USA  
E-mail: ple-sales@pletronics.com  
URL: www.pletronics.com  
Copyright © 2018 Pletronics Inc.  
www.pletronics.com  
425-776-1880  
8

相关型号:

SM5544TEV-0.8MT250

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 0.8MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS

SM5544TEV-12.0M

CMOS Output Clock Oscillator, 12MHz Nom, ROHS COMPLIANT, CERAMIC, LCC, 4 PIN
PLETRONICS

SM5544TEV-160.0M

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 160MHz Nom
PLETRONICS

SM5544TEV-160.0M-T1K

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 160MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS

SM5544TEV-160.0M-T250

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 160MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS

SM5544TEV-160.0M-T500

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 160MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS

SM5544TEV-160.0MT1K

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 160MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS

SM5544TEV-160.0MT250

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 160MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS

SM5544TEV-160.0MT500

CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 160MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS

SM5544TEV-75.0M-T1K

SM55T Series 3.3 V CMOS Clock Oscillators
PLETRONICS

SM5544TEV-75.0M-T250

SM55T Series 3.3 V CMOS Clock Oscillators
PLETRONICS

SM5544TEV-75.0M-T500

SM55T Series 3.3 V CMOS Clock Oscillators
PLETRONICS