SM5545MY-0.80M-T1K [PLETRONICS]
CRYSTAL OSCILLATOR, CLOCK, CMOS OUTPUT, LCC-4;型号: | SM5545MY-0.80M-T1K |
厂家: | PLETRONICS, INC. |
描述: | CRYSTAL OSCILLATOR, CLOCK, CMOS OUTPUT, LCC-4 机械 输出元件 振荡器 |
文件: | 总8页 (文件大小:305K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
• Pletronics’ SM55 Series is a quartz crystal
controlled precision square wave generator with a
CMOS output.
• The package is designed for high density surface
mount designs.
• 0.8 to 80 MHz
• 3.2 x 5 mm LCC Ceramic Package
• Enable/Disable Function
• Disable function includes low sndbpower
mode
• This is a low cost mass produced oscillator.
• Tape and Reel or cut tape packaging is available.
• Low Jitter
• Lowest power solution
Pletronics Inc. certifies this device is in accance ith the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/ECdirectives.
Pletronics Inc. guarantees the device does not contain the llowg:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE
Weight of the Device: 0.064 grams
Moisture Sensitivity Level: 1 As defined in J-STD-C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
VCC Supply Voltage
Vi Input Voltage
Vo Output Voltage
7.0V
o VCC + 0.5V
0.5V to VCC + 0.5V
Io Output Crret
+25 mA to -25 mA
Thrml Characteristics
he maximudie or junction temperature is 155oC
hermaresistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
nstruction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2010, Pletronics Inc.
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
Part Number:
SM55
45
M
E
Y -75.0M -XX
Part Marking:
Packaging code or blank
PFF.FFF M
C YMDxx
or
PFF.FF M
C YWx
or
T250 = 250 per Tape and Reel
T500 = 500 per Tape and Reel
T1K = 1000 per Tape and Reel
Frequency in MHz
E SM5
FF.FF M
CYMDx
or
5WWx
C FF.FF Mxxx
or
Supply Voltage VCC
Y = 5.0V +_ 10%
(Y is only included in part numr if
Enhanced OTR is not chosen)
Examples: SM5544ME, M5545M
Optional Enhanced OTR
5xYWWxx
FF.FFF M
CPLE xxx
Blank = Temp. rae -10 to +7o
C = Temp. rane -2to +70oC
E = Temp. range -40 to +85oC
Series del
Fquency Stity
45 +_ 50 ppm
44 = +_ 5 ppm
20 = +_ ppm
Sis Model
Marking Legend:
PLE = Pletronics
FF.FFF M = Frequcy in MH
YYWW or WW or YM= ate of Manufacture (year and week, or year-month-day)
All other arking iinternal factory codes
Spifications such s frequency stability, supply voltage and operating temperature range, etc. are
nidentified fthe marking. External packaging labels and packing list will correctly identify the
orded Pletronics part number.
Codes for De Code YMD
Code
10
1
2
3
4
A
B
C
D
E
F
G
H
J
K
L
M
Month
010 2011 2012 2013 2014
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Code
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
U
B
11
V
C
D
13
X
E
14
Y
F
15
Z
G
Day
Code
Day
12
W
28
16
H
J
K
L
M
21
N
P
R
T
17
18
19
20
22
23
24
25
26
27
29
30
31
www.pletronics.com
425-776-1880
2
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
Electrical Specification for 5.0V _+10% over the specified temperature range
Item
Min
0.8
-50
-25
-20
Max
80
Unit
MHz
ppm
Condition
Frequency Range
Frequency Accuracy “45"
“44"
+50
+25
+20
CMOS
-
For all supply voltages, load changes, gg for 1
year, shock, vibration and temperates
“20"
Output Waveform
Output High Level
Output Low Level
Output Symmetry
Jitter
90
-
%
%
%
of VCC (See load circ
10
45
-
55
at 50% point of VCC ee load circuit)
0.6
2.5
-
pS RMS 12 KHz to m output frequency
pS RMS 10 Hz 1 MHz fm the output frequency
-
Enable/Disable Internal Pull-up
V disable
50
-
Kohm
%
to CC
30
of VCC aped to pad 1
V enable
70
-10
-10
-
-
%
Output leakage
V
OUT = VCC
+10
+10
3
A
u
uA
nS
mS
oC
oC
oC
oC
Pad 1 low, device disabled
VOUT = 0V
Standby Current ICC
Enable time
-
10
Time for output to reach a logic state
Time for output to reach a high Z state
Time for output to reach specified frequency
Standard Temperature Range
Disable time
-
Start up time
Operating Temperature Range
-40
-
+85
+125
Extended Temperature Range “C” Option
Extended Temperature Range “E” Option
Storage Temperature Rage
Typical phase noise plot
for 5 oscillatos at
different output
0
-20
-40
-60
-80
frequecies.
19.4M
25M
32M
50M
-100
66.7M
-120
-140
-160
-180
10
1,000
100,000
10,000,000
Frequency (Hz)
www.pletronics.com
425-776-1880
3
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
Electrical Specification for 5.0V _+10% over the specified temperature range
Item
Typ
Max
Unit
Condition
Output TRISE and TFALL
1
2
nS
< 35 MHz
CLOAD = 15 pF
10% to 90% CC
See Load ircuit
1.5
2.5
2.5
4
3
3.5
5
nS
nS
nS
nS
nS
> 35 MHz
< 35 MHz
> 35 MHz
< 35 MHz
> 35 MHz
CLOAD 3pF
10o 90% VCC
Se ad Circt
6
CLOAD = 5pF
10% to 90of VCC
Se Load ircuit
4
8
V
CC Supply Current (ICC)
7
8
11
13
15
58
12
14
17
63
13
15
22
mA
mA
mA
mA
mA
mA
mA
mA
mA
m
< 8 MHz
CLOAD = 15 pF
> 8 MHz and < 16 Mz
> 16 MHz a< 35 MH
> 35 MH
9
28
7.5
8.5
11
33
8
< 8 MHz
CLOAD = 30 pF
8 Mz and < 16 Hz
> MHz and < 35 MHz
> 35 Mz
< 8 M
CLOAD = 50 pF
9
8 MHz and < 16 MHz
> 16 MHz and < 35 MHz
> 35 MHz
15
40
Specifications with Pad E/D it
www.pletronics.com
425-776-1880
4
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
Load Circuit and Test Waveform
Symmetry
Vhigh
90% * Vcc
50% * Vcc
10% * Vcc
Vlow
Ground
Trise
Tfall
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
MIL-STD-883 Method 02, ndition B
MIL-STD-883 Mh2007, Conon A
MIL-STD-8ethod 23
Solderability
Thermal Shock
MIL-STD-883 Mhod 1011, Condition A
ESD Rating
Model
Minimum ge
Conditions
Human Body Model
Charged Device l
1500
100
MIL-STD-883 Method 3115
JESD 22-C101
Packae Labeling
Labe" x 2.6" (25.4m x 66.7mm)
Font is Coier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 3FuASCII
www.pletronics.com
425-776-1880
5
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
Mechanical:
Inches
mm
A
0.197 +_0.006
5.00 +_0
B
C
0.126 +_0.006
0.045 +_0.004
30 +_0.1
1.15 +_0.10
3
D1 0.048
E1 0.100
2.5
F1
0.0
0.10
G.050
1.27
1.40
I1
0.024
0.004
0.60
J1
0.10R
0.020R
Not to Scale
Contacts :
K1 0.008
1 Typil dmensions
Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nicke0 to 0 µinches (1.27 to 8.89 µm)
Pad
Function
Note
1
Output
Wheot connected the oscillator shall operate.
Enable/Disable
en tlogic low the output will be inhibited (high impedance state.)
Recommend connecting this pad to VCC if the oscillator is to be always on.
2
3
4
Ground (GND)
Outpu
SuppVoge
(VCC)
Recommend connecting appropriate power supply bypass capacitors as close as
possible.
ut and application information
timum Jitter Performance, Pletronics recommends:
•
•
•
a ground plane under the device
no large transient signals (both current and voltage) should be routed under the device
do not layout near a large magnetic field such as a high frequency switching power supply
do not place near piezoelectric buzzers or mechanical fans.
www.pletronics.com
425-776-1880
6
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
250
200
215°C±10°C
175°C±10°C
150
100
Apmately 50 Sonds
120 to 160 Seconds
wed raof tempature change
Mamum 4°cond
The part may be reflowed 3 times without degradation.
Tape and Reel: available for quantities of 250 to 10 per rel, cut tape for < 250
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
Min
S1
Min
T
Max
D0
E1
P0
P2
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
+_0.1
4.0
0.6
0.6
+0.1
-0.0
_+0.1
2.0
+_0.1
Variable Dimensions
Tape
Size
B1
Max
E2 Min
14.25
F
P1
W
Max
Ao, Bo &
Ko
16 mm
12.1
7.5 .1
8.0 +_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to -481-B
mensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
mm
7.0
177.8
2.50
63.5
10.0
254.0
13.0
330.2
3.75
95.3
inches
mm
4.00
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
7
SM55M Series 5.0 V
CMOS Clock Oscillators
April 2010
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placin
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale adae
with PLE’s limited warranty. Testing and other quality control techniques are used to textent LE
deems necessary to support this warranty. Except where mandated by specific contractudocums,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product desCustmers e
responsible for their products and applications using PLE components. To minimze the risks associated
with the customer products and applications, customers should providuate sign and operating
safeguards.
PLE products are not designed, intended, authorized or warraeto be suitafor use in life support
applications, devices or systems or other critical applications that minvolve potential risks of death,
personal injury or severe property or environmental dama. Inclusion f LE products in such
applications is understood to be fully at the risk of the cstomer. Use oPLE products in such applications
requires the written approval of an appropriate PLE fic. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any licenseeither exress or implied, is granted under any PLE
patent right, copyright, artwork or other inual perty right relating to any combination, machine or
process which PLE product or services are ued. Information published by PLE regarding third-party
products or services does not constilicene from PLE to use such products or services or a warranty
or endorsement thereof. Use of stion ay require a license from a third party under the
patents or other intellectual proped party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of informaon in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is ccompanid by associated warranties, conditions, limitations and notices.
Reproduction of thinforation wh alteration is an unfair and deceptive business practice. PLE is not
responsible or ble for such ered documents.
Resale of PLE pducts oservices with statements different from or beyond the parameters stated by
PLE for hat product or rvice voids all express and implied warranties for the associated PLE product or
servind is an unir or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
Fax: 425-776-2760
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Copyright © 2007, 2010 Pletronics Inc.
www.pletronics.com
425-776-1880
8
相关型号:
SM5545MY-FREQ-T500
CMOS Output Clock Oscillator, 0.8MHz Min, 80MHz Max, ROHS COMPLIANT, CERAMIC, LCC-4
PLETRONICS
SM5545TCV-0.8MT1K
CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 0.8MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS
SM5545TCV-0.8MT500
CMOS Output Clock Oscillator, 0.8MHz Min, 160MHz Max, 0.8MHz Nom, ROHS COMPLIANT, CERAMIC, SMD, LCC-4
PLETRONICS
©2020 ICPDF网 联系我们和版权申明