SM7720HW-FREQ-T1K

更新时间:2024-10-30 00:31:53
品牌:PLETRONICS
描述:CMOS Output Clock Oscillator, 0.8MHz Min, 69.9MHz Max, ROHS COMPLIANT, CERAMIC, LCC-4

SM7720HW-FREQ-T1K 概述

CMOS Output Clock Oscillator, 0.8MHz Min, 69.9MHz Max, ROHS COMPLIANT, CERAMIC, LCC-4

SM7720HW-FREQ-T1K 数据手册

通过下载SM7720HW-FREQ-T1K数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
SM77H Series 2.5V  
CMOS Clock Oscillators  
May 2008  
• Pletronics’ SM77H Series is a quartz crystal  
controlled precision square wave generator with a  
CMOS output.  
• 0.8 to 70 MHz  
• 5 x 7 mm LCC Ceramic Package  
• Enable/Disable  
• The package is designed for high density surface  
mount designs.  
• Disable function includes low standby power  
mode  
• This is a low cost mass produced oscillator.  
• Tape and Reel or cut tape packaging is available.  
• Low Jitter  
Pletronics Inc. certifies this device is in accordance with the  
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.  
Pletronics Inc. guarantees the device does not contain the following:  
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s  
Weight of the Device: 0.17 grams  
Moisture Sensitivity Level: 1 As defined in J-STD-020C  
Second Level Interconnect code: e4  
Absolute Maximum Ratings:  
Parameter  
Unit  
VCC Supply Voltage  
Vi Input Voltage  
Vo Output Voltage  
-0.5V to +7.0V  
-0.5V to VCC + 0.5V  
-0.5V to VCC + 0.5V  
Io Output Current  
+25 mA to -25 mA  
Thermal Characteristics  
The maximum die or junction temperature is 155oC  
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane  
and construction of the PCB.  
Product information is current as of publication date. The product conforms  
to specifications per the terms of the Pletronics standard warranty. Production  
processsing does not necessarily include testing of all parameters.  
Copyright © 2007, 2008 Pletronics Inc.  
SM77H Series 2.5 V  
CMOS Clock Oscillators  
May 2008  
PART NUMBER:  
SM77  
45  
H
E
W
- 50.0M  
-XX  
Part Marking:  
Packaging code or blank  
PLE SM77  
FF.FFF M  
C YMDXX  
T250 = 250 per Tape and Reel  
T500 = 500 per Tape and Reel  
T1K = 1000 per Tape and Reel  
or  
Frequency in MHz  
PLE SM77  
FF.FFF M  
C YYWWXX  
Supply Voltage VCC  
W = 2.5V +_ 10%  
Optional Enhanced OTR  
Blank = Temp. range -10 to +70oC  
E = Temp. range -40 to +85oC  
or  
7XYWWXX  
FF.FFF M  
C PLE XXX  
Series Model  
Frequency Stability  
45 = _+ 50 ppm  
44 = _+ 25 ppm  
20 = _+ 20 ppm  
Series Model  
Marking Legend:  
PLE = Pletronics  
FF.FFF M = Frequency in MHz  
YYWW or YWW or YMD = Date of Manufacture (year and week, or year-month-day)  
All other marking is internal factory codes  
Specifications such as frequency stability, supply voltage and operating temperature range, etc. are  
not identified from the marking. External packaging labels and packing list will correctly identify the  
ordered Pletronics part number.  
Codes for Date Code YMD  
Code  
6
7
8
9
0
1
2
2006  
2007  
2008  
2009  
2010  
2011  
2012  
Year  
Code  
Month  
A
B
C
D
E
F
G
H
J
K
L
M
JAN  
FEB  
MAR  
APR  
MAY  
JUN  
JUL  
AUG  
SEP  
OCT  
NOV  
DEC  
Code  
1
1
2
2
3
3
F
4
5
6
6
7
8
8
9
9
A
10  
N
B
11  
P
C
12  
R
4
5
H
7
K
Day  
Code  
Day  
D
E
G
16  
W
28  
J
L
M
21  
13  
T
14  
U
15  
V
17  
X
18  
Y
19  
Z
20  
22  
23  
24  
Code  
Day  
25  
26  
27  
29  
30  
31  
Legacy Part Numbers:  
‘S’ Denoted Symmetry of 45%/55% at 50% of VCC. This is now the standard Duty Cycle and is no longer needed in  
the part number. We will still support part numbers with the ‘S’. For example: SM7745HW and SM7745HSW  
describe the same specifications and can be used interchangeably by the customer.  
-30 Denoted Output Load other than the standard 15 pF. Data sheets now reflect the specifications at all available  
loads so this load designation is no longer needed. We’ll still support part numbers with this load designation.  
www.pletronics.com  
425-776-1880  
2
SM77H Series 2.5 V  
CMOS Clock Oscillators  
May 2008  
Electrical Specification for 2.50V _+10% over the specified temperature range  
Item  
Min  
0.8  
-50  
-25  
-20  
Max  
69.9  
+50  
+25  
+20  
CMOS  
-
Unit  
MHz  
ppm  
Condition  
Frequency Range  
Frequency Accuracy 45"  
44"  
For all supply voltages, load changes, aging for 1  
year, shock, vibration and temperatures  
20"  
Output Waveform  
Output High Level  
Output Low Level  
Output Symmetry  
90  
-
%
%
%
of VCC (See load circuit)  
10  
45  
55  
at 50% point of VCC (See load circuit)  
Jitter  
-
-
0.6  
2.5  
-
pS RMS 12 KHz to 20 MHz from the output frequency  
pS RMS 10 Hz to 1 MHz from the output frequency  
E/D Internal Pull-up  
V disable  
50  
-
Kohm  
%
to VCC  
30  
of VCC applied to pad 1  
V enable  
70  
-10  
-10  
-
-
%
Output leakage VOUT = VCC  
VOUT = 0V  
+10  
+10  
3
uA  
uA  
uA  
nS  
nS  
mS  
oC  
Pin 1 low, device disabled  
Standby Current ICC  
Enable time  
-
100  
100  
3
Time for output to reach a logic state  
Time for output to reach a high Z state  
Time for output to reach specified frequency  
Standard Temperature Range  
Disable time  
-
Start up time  
-
Operating Temperature  
Range  
-10  
-40  
-55  
+70  
+85  
+125  
oC  
Extended Temperature Range E” Option  
Storage Temperature Range  
oC  
www.pletronics.com  
425-776-1880  
3
SM77H Series 2.5 V  
CMOS Clock Oscillators  
May 2008  
Electrical Specification for 2.50V _+10% over the specified temperature range  
Item  
Typ  
Max  
7
Unit  
nS  
Condition  
Output TRISE and TFALL  
-
-
-
-
-
-
-
-
-
-
-
All  
CLOAD = 15 pF  
CLOAD =30 pF  
9
nS  
< 35 MHz  
12  
6
nS  
> 35 MHz  
VCC Supply Current (ICC)  
mA  
mA  
mA  
mA  
mA  
mA  
mA  
mA  
< 8 MHz  
CLOAD = 15 pF  
10% to 90% of VCC  
See Load Circuit  
8
> 8 MHz and < 16 MHz  
> 16 MHz and < 35 MHz  
> 35 MHz  
11  
29  
7
< 8 MHz  
CLOAD = 30 pF  
10% to 90% of VCC  
See Load Circuit  
8
> 8 MHz and < 16 MHz  
> 16 MHz and < 35 MHz  
> 35 MHz  
10  
41  
Specifications with Pad 1 E/D open circuit  
Typical phase noise plot for 5 oscillators at different output frequencies.  
0
-20  
-40  
-60  
19.4M  
25M  
-80  
-100  
-120  
-140  
-160  
-180  
32M  
50M  
66.7M  
10  
1,000  
100,000  
10,000,000  
Frequency (Hz)  
www.pletronics.com  
425-776-1880  
4
SM77H Series 2.5 V  
CMOS Clock Oscillators  
May 2008  
Load Circuit and Test Waveform  
Symmetry  
Vhigh  
90% * Vcc  
50% * Vcc  
10% * Vcc  
Vlow  
Ground  
Trise  
Tfall  
Reliability: Environmental Compliance  
Parameter  
Condition  
Mechanical Shock  
Vibration  
MIL-STD-883 Method 2002, Condition B  
MIL-STD-883 Method 2007, Condition A  
MIL-STD-883 Method 2003  
Solderability  
Thermal Shock  
MIL-STD-883 Method 1011, Condition A  
ESD Rating  
Model  
Minimum Voltage  
Conditions  
Human Body Model  
Charged Device Model  
1500  
1000  
MIL-STD-883 Method 3115  
JESD 22-C101  
Package Labeling  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Courier New  
Label is 1" x 2.6" (25.4mm x 66.7mm)  
Font is Arial  
Bar code is 39-Full ASCII  
www.pletronics.com  
425-776-1880  
5
SM77H Series 2.5 V  
CMOS Clock Oscillators  
May 2008  
Mechanical:  
Inches  
mm  
7.00 +_0.15  
5.00 +_0.15  
1.73 +_0.44  
0.96  
A
B
C
0.276 +_0.006  
0.197 +_0.006  
0.068 +_0.018  
D1 0.038  
E1 0.200  
5.08  
F1  
0.004  
0.10  
G1 0.050  
H1 0.055  
1.27  
1.40  
The detents “L” 4 each on package end  
are optional  
I1  
0.024  
0.004  
0.60  
J1  
0.10R  
Not to Scale  
K1 0.008  
0.020R  
1 Typical dimensions  
Contacts :  
Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm  
Pad  
Function  
Note  
1
Output  
When this pin is not connected the oscillator shall operate.  
Enable/Disable  
When this pin is logic low the output will be inhibited (high impedance state.)  
Recommend connecting this pin to VCC if the oscillator is to be always on.  
2
3
4
Ground (GND)  
Output  
Supply Voltage  
(VCC)  
Recommend connecting appropriate power supply bypass capacitors as close as  
possible.  
Layout and application information  
For Optimum Jitter Performance, Pletronics recommends:  
a ground plane under the device  
no large transient signals (both current and voltage) should be routed under the device  
do not layout near a large magnetic field such as a high frequency switching power supply  
do not place near piezoelectric buzzers or mechanical fans.  
www.pletronics.com  
425-776-1880  
6
SM77H Series 2.5 V  
CMOS Clock Oscillators  
May 2008  
Reflow Cycle (typical for lead free processing)  
260°C Maximum  
10 Seconds Maximum  
250  
200  
215°C±10°C  
175°C±10°C  
150  
100  
Approximately 50 Seconds  
120 to 160 Seconds  
Allowed rate of temperature change  
Maximum 4°C per second  
The part may be reflowed 2 times without degradation.  
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250  
Constant Dimensions Table 1  
T1  
Max  
Tape  
Size  
D1  
Min  
S1  
Min  
T
Max  
D0  
E1  
P0  
P2  
8mm  
12mm  
16mm  
24mm  
1.0  
1.5  
1.5  
1.5  
2.0  
_+0.05  
1.5  
1.75  
+_0.1  
4.0  
0.6  
0.6  
0.1  
+0.1  
-0.0  
_+0.1  
2.0  
+_0.1  
Variable Dimensions Table 2  
Tape  
Size  
B1  
Max  
E2 Min  
14.25  
F
P1  
T2  
Max  
W
Max  
Ao, Bo &  
Ko  
16 mm  
12.1  
7.5 +_0.1  
8.0 +_0.1  
8.0  
16.3  
Note 1  
Note 1: Embossed cavity to conform to EIA-481-B  
Not to scale  
REEL DIMENSIONS  
A
B
inches  
mm  
7.0  
177.8  
2.50  
63.5  
10.0  
254.0  
13.0  
330.2  
3.75  
95.3  
inches  
mm  
4.00  
101.6  
Tape  
Width  
C
D
mm  
13.0 +0.5 / -0.2  
mm  
16.4  
+2.0  
-0.0  
16.4  
+2.0  
-0.0  
16.4  
+2.0  
-0.0  
16.0  
Reel dimensions may vary from the above  
www.pletronics.com  
425-776-1880  
7
SM77H Series 2.5 V  
CMOS Clock Oscillators  
May 2008  
IMPORTANT NOTICE  
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and  
other changes to this product at anytime. PLE reserves the right to discontinue any product or service  
without notice. Customers are responsible for obtaining the latest relevant information before placing  
orders and should verify that such information is current and complete. All products are sold subject to  
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.  
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance  
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE  
deems necessary to support this warranty. Except where mandated by specific contractual documents,  
testing of all parameters of each product is not necessarily performed.  
PLE assumes no liability for application assistance or customer product design. Customers are  
responsible for their products and applications using PLE components. To minimize the risks associated  
with the customer products and applications, customers should provide adequate design and operating  
safeguards.  
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support  
applications, devices or systems or other critical applications that may involve potential risks of death,  
personal injury or severe property or environmental damage. Inclusion of PLE products in such  
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications  
requires the written approval of an appropriate PLE officer. Questions concerning potential risk  
applications should be directed to PLE.  
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE  
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or  
process which PLE product or services are used. Information published by PLE regarding third-party  
products or services does not constitute a license from PLE to use such products or services or a warranty  
or endorsement thereof. Use of such information may require a license from a third party under the  
patents or other intellectual property of the third party, or a license from PLE under the patents or other  
intellectual property of PLE.  
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is  
without alteration and is accompanied by associated warranties, conditions, limitations and notices.  
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not  
responsible or liable for such altered documents.  
Resale of PLE products or services with statements different from or beyond the parameters stated by  
PLE for that product or service voids all express and implied warranties for the associated PLE product or  
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.  
Contacting Pletronics Inc.  
Pletronics Inc.  
Tel: 425-776-1880  
19013 36th Ave. West  
Lynnwood, WA 98036-5761 USA  
Fax: 425-776-2760  
E-mail: ple-sales@pletronics.com  
URL: www.pletronics.com  
Copyright © 2006, 2007, 2008 Pletronics Inc.  
www.pletronics.com  
425-776-1880  
8

SM7720HW-FREQ-T1K 相关器件

型号 制造商 描述 价格 文档
SM7720HW-FREQ1 PLETRONICS CMOS Output Clock Oscillator, 1.5MHz Min, 10.999MHz Max 获取价格
SM7720HW-FREQ1-SB-30 PLETRONICS CMOS Output Clock Oscillator, 1.5MHz Min, 10.999MHz Max 获取价格
SM7720HW-FREQ1-SB-50 PLETRONICS CMOS Output Clock Oscillator, 1.5MHz Min, 10.999MHz Max 获取价格
SM7720HW-FREQ2 PLETRONICS CMOS Output Clock Oscillator, 11MHz Min, 23.999MHz Max 获取价格
SM7720HW-FREQ2-30 PLETRONICS CMOS Output Clock Oscillator, 11MHz Min, 23.999MHz Max 获取价格
SM7720HW-FREQ2-SB PLETRONICS CMOS Output Clock Oscillator, 11MHz Min, 23.999MHz Max 获取价格
SM7720HW-FREQ2-SB-30 PLETRONICS CMOS Output Clock Oscillator, 11MHz Min, 23.999MHz Max 获取价格
SM7720HW-FREQ3 PLETRONICS CMOS Output Clock Oscillator, 24MHz Min, 29.999MHz Max 获取价格
SM7720HW-FREQ4-30 PLETRONICS CMOS Output Clock Oscillator, 30MHz Min, 45.999MHz Max 获取价格
SM7720HW-FREQ4-SB PLETRONICS CMOS Output Clock Oscillator, 30MHz Min, 45.999MHz Max 获取价格

SM7720HW-FREQ-T1K 相关文章

  • HARTING(浩亭)圆形连接器产品选型手册
    2024-10-31
    6
  • HYCON(宏康科技)产品选型手册
    2024-10-31
    6
  • GREEGOO整流二极管和晶闸管产品选型手册
    2024-10-31
    7
  • 西门子豪掷106亿美元,战略收购工程软件巨头Altair
    2024-10-31
    8