SM7744HSV-37.5M [PLETRONICS]
CMOS Output Clock Oscillator, 37.5MHz Nom, LEAD FREE, CERAMIC, LEADLESS PACKAGE-4;型号: | SM7744HSV-37.5M |
厂家: | PLETRONICS, INC. |
描述: | CMOS Output Clock Oscillator, 37.5MHz Nom, LEAD FREE, CERAMIC, LEADLESS PACKAGE-4 |
文件: | 总1页 (文件大小:81K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
SM7745H CMOS Series
CMOS with Enable/ Disable or Optional Stand By Mode (3.3 V)
Fundamental or 3rd Overtone Crystal Used
–
1.500 MHz 69.999 MHz
4 Pad 7 x 5mm Leadless Surface Mount Ceramic Clock Oscillator
Standard Specifications
Overall Frequency Stability
SM7745H: ± 50 PPM, SM7744H: ± 25 PPM, SM7720H: ± 20 PPM over Operating Temp. Range
°
Operating Temperature Range 0 to +70 C is standard, but OTR can be extended to - 40 to +85°C for certain frequencies
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
Logic Levels
5.0 volts, 3.3 volts and 2.5 volts available, .01 μF bypass cap recommended
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Logic “1” 90% of Vcc MIN; Logic “0” 10% of Vcc MAX
Output Load
Enable/Disable Option (E/D)
Standard load is 15 pF (typ. 1 ASIC) maximum, see Test Circuit 2 (consult factory for heavier loads)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Max. Rise and Fall Time
Max. Supply Current
Icc (mA) w/ 15pF load Tr & Tf (nS) w/ 15pF load
Frequency Range
(MHz)
2.5V, 3.3V
5.0V
10
15
20
30
2.5V to 5.0V
–
1.500 10.999
7
15
15
20
25
5.0
5.0
5.0
5.0
4.5
–
11.000 23.999
–
24.000 29.999
–
30.000 45.999
–
46.000 69.999
45
Part Numbering Guide
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)
SM77 45 H E V - 50.0M - SB - 30 - XXX (Internal Code or blank)
Packaging
Tray or
16mm tape
8mm pitch
Non-Std Output Load Blank = 15 pF max, 30 = 30 pF max
Optional Stand By Mode (3.3 volt only)
Frequency in MHz
Model
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
20 = ± 20 PPM
Supply Voltage (Vcc)
Part Marking for Vcc
Y or blank: 5.0V ± 10%
V: 3.3 volts ±10%
W: 2.5 volts ± 5%
Blank or A, F or Y
A, B, D, F or V
B, C, D, F or W
Special Specifications (choose all that apply)
Blank: Standard specs per above
E: Extended OTR (- 40 to +85°C)
S: 45/55% Symmetry at 50% of Vcc
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
not to scale
Solder Pads
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
0.200 (5.08)
0.276 (7.0 ± .15)
PIN SIGNAL
0.004 (0.10)
0.050 (1.27)
1
2
3
4
E/D or SB
GND
OUT
3
2
4
3
2
4
1
0.087 (2.2)
0.079 (2.0)
.01 mF
bypass
capacitor
Vcc
1
0.055
(1.4)
0.024
(0.60)
0.075 (1.9)
MAX
0.200 (5.08)
0.055 0.145
(1.4)
(3.68)
Jan 2006
Pl tronics, Inc. (425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
12
相关型号:
©2020 ICPDF网 联系我们和版权申明