TCA3027035EK280005-13.00M [PLETRONICS]
Clipped Sine Output Oscillator, 13MHz Nom, LCC, 4 PIN;
| 型号： | TCA3027035EK280005-13.00M |
| 厂家： | 
PLETRONICS, INC. |
| 描述： | Clipped Sine Output Oscillator, 13MHz Nom, LCC, 4 PIN 机械 振荡器 |
| 文件： | 总6页 (文件大小：483K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
TCA3 Series
PLETRONICS
STRATUM-III TYPE TCXO / TCVCXO
Applications
Features
SONET / SDH / DWDM
• Pletronics’ TCA3 Stratum-III Type Series
Test & Measurement
Temperature Compensated Crystal Oscillator
Telecom Transmission & Switching Equipment
Base Stations / Picocell
Wireless Communication Equipment
• Optional Voltage Control Function
• Low Power / Fast Warm Up
• Clipped Sine Wave Output
TCA3
5.0 x 7.0 x 2.6 mm
LCC Ceramic Package
• 2.8V to 3.3V nominal Supply Voltage
• See table for developed Frequencies
Electrical Characteristics
Condition (Consult factory for other options)
Parameter
Min
Typ
Max
Unit
Frequency Range 2
8.192
-
40.0
MHz
See table below for developed frequencies
Frequency Stability vs. Temperature 2
Frequency Initial Calibration
Operating Temperature Range 2
Supply Voltage 1, 2 VCC
-
-
±0.28
-
ppm
ppm
°C
(fmax - fmin) / 2
-
-
-
-
±1.0
+85
3.3
7.0
25°C ± 2°C, 24 hours after reflow
Widest range available
± 5%
-40
2.8
-
Volts
mA
Supply Current ICC
Load: 10 Kohm || 10 pF, VCC ± 5%
24 Hour Holdover
-
-
-
±0.37
±0.2
±0.2
2.5
ppm
ppm
ppm
Volts
ppm
%
Frequency Stability vs. Supply
Frequency Stability vs. Load
-
Load: 10 Kohm || 10 pF, VCC ± 5%
Load: 10 Kohm || 10 pF ± 5%
1.50 volts nominal for VCC
Positive Slope
-
-
Vcontrol Range
Frequency Pullability 2
Linearity
0.5
0
-
±8.0
-
±12.0
2.0
-
Output Waveform
Output Level
Clipped Sine Wave
DC Coupled
0.8
-
-
-
V p-p
Load: 10 Kohm || 10 pF ± 10%
Time to reach specified frequency
Startup Time
-
3.0
S
Long term stability (Aging)
Jitter
-
±3.0
0.6
-
ppm
pS
After 15 years
Frequency offset from carrier 12 kHz to 5 MHz,
typical performance at 20.0 MHz
-
-
-100
-120
-134
-144
Phase Noise
10 Hz
100 Hz
1 kHz
10 kHz
-
-
dBc/Hz 25°C ± 2°C at 26.0 MHz
°C
Storage Temperature Range
-55
-
+95
Note:
1 Place a 10nF power supply bypass capacitor next to device for correct operation
2 Specified by part number.
The following is a list of developed frequencies. Consult factory for other options.
8.192M, 9.60M, 9.72M, 10.00M, 12.80M, 13.00M, 16.384M,
19.20M, 19.44M, 20.00M, 25.60M, 26.00M, 40.00M only
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jun 5, 2015 Rev. B
Pg 1
Copyright © 2015, Pletronics Inc. C19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
TCA3 Series
STRATUM-III TYPE TCXO / TCVCXO
PLETRONICS
Part Number (Possible Options shown)
VCC Supply Voltage 1
Series
Stability 1, 2
Operating Temperature
Pullability 1
Frequency
Model
Lowest
Highest
035
Lowest
G
Highest
K
(ppm)
280
(ppm)
008
(MHz)
TCA3
031
-19.44M
A = +10oC
B = +5oC
C = +0oC
D = -5oC
E = -10oC
F = -15oC
G = -20oC
H = -25oC
J = -30oC
K = -35oC
L = -40oC
A = +40oC
B = +45oC
C = +50oC
D = +55oC
E = +60oC
F = +65oC
G = +70oC
H = +75oC
J = +80oC
K = +85oC
10 - 40 MHz
Developed:
8.192M, 9.60M,
9.72M, 10.00M,
12.80M, 13.00M,
16.384M, 19.20M,
19.44M, 20.00M,
25.60M, 26.00M,
40.00M
000 = TCXO
005 = ± 5
031 = 3.1 for 3.3 volts nominal 035 = 3.5 for 3.3 volts nominal
029 = 2.9 for 3.0 volts nominal 031 = 3.1 for 3.0 volts nominal
027 = 2.7 for 2.8 volts nominal 029 = 2.9 for 2.8 volts nominal
280 = ± 0.28
500 = ± 0.5
008 = ± 8
1 Contact Factory for non-standard specifications
2 Not all stabilities are available with all operating temperature ranges. Contact Factory for exact combinations available.
Device Marking
YMD
FFFF = Crystal Frequency in MHz (See Note below)
zzz = Internal factory codes
PLE = Pletronics
M U4 = Internal factory codes
YMD = Date code (may appear in one of 3 locations shown)
FFFF.zzz
FFFF. zzz
YMD
OR
C PLE M U4
C
PLEzzzzz
YMD
YMD
Note: Output Frequency may be half the Crystal Frequency marking, depending on requirements.
Specifications such as part number, frequency stability, supply voltage and operating temperature range, etc. are not identified from marking.
External packaging labels and packing list will correctly identify the ordered Pletronics part number.
Codes for Date Code YMD (Year Month Day)
Code
Year
4
5
6
7
8
Code
A
B
C
D
E
F
G
H
J
K
L
M
2014
2015 2016 2017 2018
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Month
Code
Day
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
T
U
V
W
X
Y
Z
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
Package Labeling
Tape and Reel available for quantities of 250 to 1000 per reel, cut tape for < 250. 16mm tape, 8mm pitch.
P/N Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
RoHs Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
Pletronics Inc. certifies this device is in accordance with the RoHS 2 (2011/65/EU) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.20 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020D
Second Level Interconnect code: e4
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jun 5, 2015 Rev. B
Pg 2
Copyright © 2015, Pletronics Inc. C19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
TCA3 Series
STRATUM-III TYPE TCXO / TCVCXO
PLETRONICS
Mechanical Dimensions
Inches
mm
0.276 ± 0.006 7.00 ± 0.15
A
B
0.197 ± 0.006 5.00 ± 0.15
0.104 max
0.038
0.200
0.043
0.102
0.024
0.055
0.145
0.004
2.65 max
.96
C
D1
E1
F1
G1
H1
J1
K1
L1
5.08
1.10
2.60
0.60
1.40
3.68
0.10
Pad Layout mm shown (Top View)
1 Typical dimensions
Disclaimer: Recommended layout shown.
Adjust pad layout as needed for individual
process requirements.
Solder mask required, as shown.
(Not to Scale)
Contacts (pads): Gold 11.8 to 39.4 µinches (0.3 to 1.0 µm) over Nickel 50 to 350 µinches (1.27 to 8.89 µm)
Layout
Pad Function
Note
Vcontrol Input
Ground (GND)
Output
If this function is not specified, recommend connecting this pad to ground. EFC (Electronic Frequency Control).
1
2
3
4
The output is DC coupled. Most commonly used with external coupling capacitor. 0.001 to 0.01µF recommended
Connect an appropriate 10nF power supply bypass capacitor as close as possible
VCC Supply Voltage
For Optimum Jitter Performance, Pletronics recommends:
$
$
$
$
$
A ground plane under the device
Do not route large transient signals (both current and voltage) under the device
Do not place near a large magnetic field such as a high frequency switching power supply
Do not place near piezoelectric buzzers or mechanical fans
Minimize air flow across the device
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jun 5, 2015 Rev. B
Pg 3
Copyright © 2015, Pletronics Inc. C19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
TCA3 Series
STRATUM-III TYPE TCXO / TCVCXO
PLETRONICS
Electrical Test /Load Circuit
Environmental / ESD Ratings
Reliability: Environmental Compliance
ESD Rating
Parameter
Condition
Model
Min. Voltage
Condition
JESD22-A114
Human Body Model
2000V
Mechanical Shock
JESD22-B104
JESD22-B103
IPC J-STD-002
Charged Device Model
Machine Model
500V
200V
JESD 22-C101
JESD22-A115
Vibration
Solderability
Thermal Shock
MIL-STD-883 Method 1011, Condition A
Absolute Maximum Ratings
Parameter
Unit
Thermal Characteristics:
The maximum die or junction temperature is 155oC
VCC Supply Voltage
Vi Input Voltage
Io Output Current
-0.6V to +6V
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder
pads, ground plane and construction of the PCB.
-0.6V to VCC + 0.6V
-10mA to +10mA
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jun 5, 2015 Rev. B
Pg 4
Copyright © 2015, Pletronics Inc. C19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
TCA3 Series
STRATUM-III TYPE TCXO / TCVCXO
PLETRONICS
Reflow Cycle
The part may be reflowed 2 times without degradation
(typical for lead free processing).
Parts assembled with No Clean (NC) solder paste.
Tape and Reel
Tape Constant Dimensions Table 1
Tape
Size
D1
min
S1
T
T1
Do
E1
Po
P2
min max max
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
1.5
±0.05
1.75
4.0
0.6
0.6
0.1
+0.1
-0.0
±0.1 ±0.1
2.0
±0.1
Tape Variable Dimensions Table 2
Tape
Size
B1
max
E2
min
T2
W
Ao, Bo &
Ko
F
P1
max max
7.5
±0.1
8.0
±0.1
16mm 12.1 14.25
8.0
16.3
Note 1
Dimensions in mm
Drawing Not to scale
Note 1: Embossed cavity to conform to EIA– 481-B
Reel Dimensions (may vary) Table 3
A
B
C
D
Reel
Size
Inches
7.0
mm
Inches
2.50
mm
63.5
101.6
95.3
mm
mm
7
177.8
254.0
330.2
13.0
Tape size +0.4
10
13
10.0
13.0
4.00
+0.5
-0.2
+2.0
-0.0
3.75
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jun 5, 2015 Rev. B
Pg 5
Copyright © 2015, Pletronics Inc. C19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
TCA3 Series
STRATUM-III TYPE TCXO / TCVCXO
PLETRONICS
Important Notice
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and other
changes to this product at anytime. PLE reserves the right to discontinue any product or service without notice.
Customers are responsible for obtaining the latest relevant information before placing orders and should verify that
such information is current and complete. All products are sold subject to PLE’s terms and conditions of sale
supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance with
PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE deems necessary
to support this warranty. Except where mandated by specific contractual documents, testing of all parameters of
each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are responsible for
their products and applications using PLE components. To minimize the risks associated with the customer
products and applications, customers should provide adequate design and operating safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death, personal
injury or severe property or environmental damage. Inclusion of PLE products in such applications is understood to
be fully at the risk of the customer. Use of PLE products in such applications requires the written approval of an
appropriate PLE officer. Questions concerning potential risk applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE patent
right, copyright, artwork or other intellectual property right relating to any combination, machine or process which
PLE product or services are used. Information published by PLE regarding third-party products or services does
not constitute a license from PLE to use such products or services or a warranty or endorsement thereof. Use of
such information may require a license from a third party under the patents or other intellectual property of the third
party, or a license from PLE under the patents or other intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is without
alteration and is accompanied by associated warranties, conditions, limitations and notices. Reproduction of this
information with alteration is an unfair and deceptive business practice. PLE is not responsible or liable for such
altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by PLE for that
product or service voids all express and implied warranties for the associated PLE product or service and is an
unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics, Inc.
Tel: 425.776.1880
19013 36th Ave. West
Lynnwood, WA 98036-5761
U.S.A.
Fax: 425.776.2760
email: ple-sales@pletronics.com
URL: www.pletronics.com
Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty.
Production processing does not necessarily include testing of all parameters.
Jun 5, 2015 Rev. B
Pg 6
Copyright © 2015, Pletronics Inc. C19013 36th Ave. W, Lynnwood, WA 98036 USA C www.pletronics.com C 425-776-1880
相关型号：
©2020 ICPDF网 联系我们和版权申明