THA4030036ED003000-8.0M [PLETRONICS]
CMOS Output Clock Oscillator, 8MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10;
| 型号： | THA4030036ED003000-8.0M |
| 厂家： | 
PLETRONICS, INC. |
| 描述： | CMOS Output Clock Oscillator, 8MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10 机械 振荡器 |
| 文件： | 总7页 (文件大小：101K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
THA4 Series
TCXO / VCTCXO
November 2010
• Pletronics’ THA4 Series is a temperature
compensated crystal oscillator with an optional
voltage control function and a CMOS output.
• The package is designed for high density
surface mount designs.
• 8 to 52 MHz
• Stabilities to less than 0.2 ppm available
• 5 x 7 mm LCC Ceramic Package
• Optional Voltage Control Function (TCVCXO)
• Tape and Reel packaging is available.
Commonly available frequencies (MHz):
8.192
10.000
19.440
12.000
20.000
12.800
24.000
13.000
25.000
16.384
26.000
19.200
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.3 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
Vi Input Voltage
Vo Output Voltage
-0.5V to +6.5V
-0.5V to VCC + 0.5V
-0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2010, Pletronics Inc.
THA4 Series
TCXO / TCVCXO
November 2010
Part Number:
THA4 031 035
G
H
015 008 -40.0M
-XX
Internal code or blank
Nominal Frequency in MHz
Pullability in ppm (Vcontrol)
000 = TCXO only
008 = +_ 8 ppm minimum
015 = +_ 15 ppm minimum
Stability in ppm
010 = +_ 1 ppm
015 = +_ 1.5 ppm
025 = +_ 2.5 ppm
002 = +_ 0.2 ppm
003 = +_ 0.3 ppm
005 = +_ 0.5 ppm
007 = +_ 0.7 ppm
Highest Specified Operating Temperature
A = +40oC E = +60oC J = +80oC
B = +45oC F = +65oC K = +85oC
C = +50oC G = +70oC
D = +55oC H = +75oC
Lowest Specified Operating Temperature
A = +10oC E = -10oC
J = -30oC
K = -35oC
L = -40oC
B = +5oC
C = +0oC
D = -5oC
F = -15oC
G = -20oC
H = -25oC
Highest Supply Voltage*
055 = 5.5 volts
036 = 3.6 volts
035 = 3.5 volts
030 = 3.0 volts
Lowest Supply Voltage *
045 = 4.5 volts
030 = 3.0 volts
031 = 3.1 volts
027 = 2.7 volts
Series (Part Type, Logic & Package)
* Supply Voltage: Select range between 2.7V and 5.5V with ratio of Highest / Lowest < 1.20
For Example: the part number for 3.3V nominal could be THA4030036.........
Part Marking:
Where: yww = Component Date code (Year Week Week)
ff.ffff = frequency in MHz
PTH = Pletronics THA4
ymd = Device Date code (Year Month Day)
ff.ffff M
yww
PTHymd
Codes for Date Code YMD
Code
Year
Code
0
1
2
3
4
A
B
C
D
E
F
G
H
J
K
L
M
Month
2010 2011 2012 2013 2014
JAN FEB MAR APR MAY JUN JUL AUG SEP OCT NOV DEC
Code
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
A
10
U
B
11
V
C
D
13
X
E
14
Y
F
15
Z
G
12
W
28
16
Day
Code
Day
H
J
K
L
M
21
N
P
R
T
17
18
19
20
22
23
24
25
26
27
29
30
31
www.pletronics.com
425-776-1880
2
THA4 Series
TCXO / TCVCXO
November 2010
Electrical Specification for specified Vcc over the specified temperature range
Item
Min
Typ
Max
Unit
MHz
ppm
Condition
Frequency Range
Frequency Accuracy 1
10
52
See standard frequencies below
Vcontrol 1.50 volts if used
-2.5
-0.5
+2.5
+0.5
Frequency Stability versus
Supply
-0.2
+0.2
ppm
Load: 15 pF & VCC +_ 5%
Output Waveform
CMOS
Output Level High
Output Level Low
90
-
-
10
8
% of VCC
Load: 15 pF
Output Rise and Fall Time
Output Duty Cycle
-
nS
%
10% to 90% of VCC Load: 15 pF
40
-
60
-
50% of VCC
Load: 15 pF
Phase Noise
1 Hz
10 Hz
-62
-91
dBc/Hz
100 Hz
1 KHz
10 KHz
-116
-137
-145
V Supply Range 1
VCC
2.7
-
5.5
-
Volts
mA
Supply Current ICC at 13 MHz
3.2
5.0
9.0
15 pF load @ 3.3 volts
I
I
CC at 26 MHz
CC at 52 MHz
Start-up time
Aging
-
10
mS
to be within ±3 ppm of the final
frequency
-1.0
-0.5
+1.0
+0.5
ppm
Per year at 25oC for the first year
For any year thereafter
Vcontrol Range
0.5
-50
-15
-40
-55
2.50
+50
+15
+85
+95
Volts
uA
1.5 volts nominal
Vcontrol Input Current
Frequency Pullability 1
ppm
oC
Frequency dependent
Operating Temperature Range 1
Storage Temperature Range
oC
1 Specified by part number
www.pletronics.com
425-776-1880
3
THA4 Series
TCXO / TCVCXO
November 2010
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
Vibration
MIL-STD-883 Method 2002, Condition B
MIL-STD-883 Method 2007, Condition A
MIL-STD-883 Method 2003
Solderability
Thermal Shock
MIL-STD-883 Method 1011, Condition A
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
Charged Device Model
1500
1000
MIL-STD-883 Method 3115
JESD 22-C101
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Bar code is 39-Full ASCII
www.pletronics.com
425-776-1880
4
THA4 Series
TCXO / TCVCXO
November 2010
Mechanical:
4
3
3
4
2
1
2
1
Not to Scale
Inches
mm
A
0.276 +_0.006
7.00 +_0.15
B
C
0.197 +_0.006
0.074 +_0.006
5.00 +_0.15
1.88 +_0.15
1.00
Pad
Function
Note
1
Vcontrol Input
If this function is not specified, recommend
connecting this pad to ground.
D1 0.039
E1 0.197
2
3
4
Ground (GND)
Output
5.00
F1
0.025
0.90
Supply Voltage
(VCC)
Recommend connecting appropriate power
supply bypass capacitors as close as
possible.
G1 0.118
H1 0.020
3.00
0.50
1.30
3.90
J1
K1 0.154
0.051
1 Typical dimensions
Contacts :
Gold 11.8 µinches 0.3 µm minimum over Nickel 50 to 350 µinches 1.27 to 8.89 µm
There are additional pads on the package bottom, these are not to be connected to any traces on the
PCB, solder masking on the PCB should be used to make sure no contact is made.
www.pletronics.com
425-776-1880
5
THA4 Series
TCXO / TCVCXO
November 2010
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
250
215°C±10°C
200
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
T1
Max
Tape
Size
D1
Min
S1
Min
T
Max
D0
E1
P0
P2
8mm
12mm
16mm
24mm
1.0
1.5
1.5
1.5
2.0
_+0.05
1.5
1.75
+_0.1
4.0
0.6
0.6
0.1
+0.1
-0.0
_+0.1
2.0
+_0.1
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
14.25
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
7.5 +_0.1
8.0 +_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
mm
7.0
177.8
2.50
63.5
10.0
254.0
13.0
330.2
3.75
95.3
inches
mm
4.00
101.6
Tape
Width
C
D
mm
13.0 +0.5 / -0.2
mm
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.4
+2.0
-0.0
16.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
6
THA4 Series
TCXO / TCVCXO
November 2010
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a warranty
or endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
Tel: 425-776-1880
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Fax: 425-776-2760
E-mail: ple-sales@pletronics.com
URL: www.pletronics.com
Copyright © 2009, 2010 Pletronics Inc.
www.pletronics.com
425-776-1880
7
相关型号：
THA4030036ED003000-8.192M
CMOS Output Clock Oscillator, 8.192MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036ED003000-FREQ
CMOS Output Clock Oscillator, 8MHz Min, 52MHz Max, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036ED010000-16.384M
CMOS Output Clock Oscillator, 16.384MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036ED025000-8.0M
CMOS Output Clock Oscillator, 8MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036EE003000-FREQ
CMOS Output Clock Oscillator, 8MHz Min, 52MHz Max, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036EE025000-26.0M
CMOS Output Clock Oscillator, 26MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036EF007000-52.0M
CMOS Output Clock Oscillator, 52MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036EG005000-10.0M
CMOS Output Clock Oscillator, 10MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036EH003000-19.2M
CMOS Output Clock Oscillator, 19.2MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036FC003000-20.0M
CMOS Output Clock Oscillator, 20MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
THA4030036FC005000-13.0M
CMOS Output Clock Oscillator, 13MHz Nom, ROHS COMPLIANT, LCC CERAMIC PACKAGE-10
PLETRONICS
©2020 ICPDF网 联系我们和版权申明