UM5-8-125.00MHZ [PLETRONICS]
Quartz Crystal;型号: | UM5-8-125.00MHZ |
厂家: | PLETRONICS, INC. |
描述: | Quartz Crystal |
文件: | 总2页 (文件大小:77K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UM1, UM4, & UM5
CRYSTALS IN MINIATURE THRU-HOLE PACKAGE
(UM1: 8.1 mm high; UM4: 4.8 mm high; UM5: 6.0 mm high)
S T A N D A R D S P E C I F I C A T I O N S :
Frequency Range
Oscillation Modes
10.000 MHz - 125.000 MHz (Consult factory for specific available frequencies)
fundamental
10 - 50 MHz
3rd overtone
20 - 120 MHz
5th overtone
75 - 125 MHz
Calibration Frequency Tolerance
at 25° C
± 50 PPM is standard, but tighter tolerances also available for
certain frequencies.
Frequency Stability over Operating
Temperature Range
± 50 PPM is standard, but tighter tolerances also available for certain
operating temperature ranges. See Table 2 on the next page.
0 - 70°C is standard, but can be extended to -40 - +85°C (just add ‘E’ after
model number).
Operating Temperature Range
Load Capacitance
Equivalent Series Resistance (ESR)
Drive Level
Aging at 25° C
Shunt Capacitance
8pF - ¥ pF (¥ pF means Series Resonance). To be specified by customer.
See Table 1 on the next page.
50mW is standard, but customer may specify different drive level
± 5 PPM per year is standard, but ±1 PPM also available.
7 pF maximum
May be specified by customer in terms of frequency shift required over a certain
range of load capacitance, (e.g.+100 PPM from CL=12 to CL=18 pF) This
requirement may be expressed also in terms of motional capacitance
in fanto-Farad (fF).
Pullability
Packaging
Bulk (100 per bag)
P A R T N U M B E R I N G G U I D E :
n
The Pletronics part number for a UM crystal consists of the following 4 elements:
1. Model Number: UM1, UM4, or UM5
2. Optional Gull Wing Package: UM1G
3. Load Capacitance:
When the load required is ¥ pF, that is, the calibration is at series resonance:
UM1-SR, UM4-SR, UM5-SR;
When the load required is XX pF: UM1-XX, UM4-XX, UM5-XX.
4. Frequency of Operation in MHz
EXAMPLES: UM1-SR-10.00 MHz; UM5-18-10.00 MHz; UM4-20-10.00 MHz; UM1G-SR-10.00 MHz
n
When customer’s requirements are non-standard, a special engineering part number will be assigned.
(continued)
Telephone: (425) 776-1880, Fax: (425) 776-2760, e-mail: ple-sales@pletronics.com
X3A
UM1, UM4, UM5 CRYSTALS
T A B L E 1 : S T A N D A R D E Q U I V A L E N T S E R I E S R E S I S T A N C E V A L U E S :
Oscillation Mode
Fundamental Mode
Frequency Range
10.000 - 14.999 MHz
15.000 - 50.000 MHz
20.000 - 29.999 MHz
30.000 - 49.999 MHz
50.000 - 120.000 MHz
75.000 - 125.000 MHz
ESR **
40 ohms maximum
30 ohms maximum
50 ohms maximum
45 ohms maximum
60 ohms maximum
80 ohms maximum
3rd Overtone Mode
5th Overtone Mode
** ESR values lower than indicated may be available. Please contact factory for lower ESR values.
T A B L E 2 :
F R E Q U E N C Y S T A B I L I T Y O P T I O N S A V A I L A B L E O V E R V A R I O U S O P E R A T I N G
T E M P E R A T U R E R A N G E S
Temp Range
(° C)
± 3
PPM
± 5
PPM
± 7.5
PPM
± 10
PPM
± 15
PPM
± 20
PPM
± 30
PPM
± 50
PPM
0 - +50
-10 - +60
-20 - +70
-30 - +80
-40 - +85
P A C K A G E O U T L I N E ( N O T T O S C A L E ) :
GULL WING OPTION - UM1G
INCHES (MILLIMETERS)
October 2000
X3B
Pletronics Inc., 19013 36th Ave. W., Suite H Lynnwood, WA 98036-5761 USA
相关型号:
©2020 ICPDF网 联系我们和版权申明