VC32H100AX-200.0M [PLETRONICS]

Oscillator, 1.5MHz Min, 200MHz Max, 200MHz Nom;
VC32H100AX-200.0M
型号: VC32H100AX-200.0M
厂家: PLETRONICS, INC.    PLETRONICS, INC.
描述:

Oscillator, 1.5MHz Min, 200MHz Max, 200MHz Nom

文件: 总1页 (文件大小:40K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Pl tronics, Inc.  
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA  
Manufacturer of High Quality Frequency Control Products  
VC2, VC3 VCXO Series  
6 Pad Leadless Surface Mount Voltage Controlled Xtal Oscillator  
CMOS/ TTL Compatible (VC2 without E/D, VC3 with E/D)  
1.500 MHz 200.00 MHz  
Standard Specifications  
Overall Frequency Stability  
Operating Temperature Range  
Supply Voltage (Vcc)  
Output Load  
Control Voltage Range (CVR)  
Pullablity over CVR  
± 15, 25, 50, 100 PPM over Operating Temperature Range  
-
°
0 to +70 C is standard, but can be extended to 40 to +85°C for certain frequencies  
5.0 volts and 3.3 volts available  
Std load is 15pF max., see Test Circuit 7 for VC2, TC 8 for VC3 (consult factory for heavier loads)  
0.5 to 4.5 volts for 5.0 volt Supply; 0.33 to 2.97 volts for 3.3 volt Supply  
± 25, 50, 100, 150, 200 PPM. Consult factory for ± 300 PPM.  
± 10% (Consult factory for ± 5%)  
Linearity  
VC3 Enable/Disable Option (E/D) Output enabled when Pin #2 is open or at Logic “1”; Output disabled when Pin #2 is at Logic “0”.  
Frequency Range  
(MHz)  
Supply Current  
Icc (mA)  
Rise and Fall Time  
Tr & Tf (nS)  
Typical  
Maximum  
Typical  
3.5  
3.0  
3.0  
2.5  
Maximum  
5.0  
1.500 20.000  
10  
20  
25  
30  
15  
25  
30  
35  
20.001 30.000  
4.5  
4.0  
3.5  
30.001 50.000  
50.001 60.000  
60.001 200.00  
Consult Factory for values  
Part Numbering Guide  
Portions of the part number that appear after the frequency may not be marked on part (C of C provided)  
3 VC22H 100 A Z - 60.0M - XXX (Internal Code or blank)  
Supply Voltage  
Blank= 5.0 volts ±5%  
3= 3.3 volts ±5%  
Frequency in MHz  
Model  
VC22H=without E/D  
VC32H=with E/D  
Packaging  
Tube or  
24mm tape  
16mm pitch  
Frequency Deviation (Pullability) over CVR  
T: ± 25 PPM  
V: ± 50 PPM  
W: ± 100 PPM  
X: ± 150 PPM  
Y: ± 200 PPM  
Z: ± 300 PPM  
Frequency Stability  
Operating Temperature Range  
15: ± 15 PPM  
25: ± 25 PPM  
50: ± 50 PPM  
100: ± 100 PPM  
A: 0 to +50°C  
B: 0 to +70°C  
C: -10 to +70°C  
D: -20 to +75°C  
E: -30 to +75°C  
F: -40 to +85°C  
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.  
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load  
inches (mm)  
Mechanical:  
not to scale  
VC3 Solder Pads  
VC2 Solder Pads  
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.  
For Best Performance,  
.195 (4.95)  
MAX  
Do NOT allow any traces other than ground under oscillators  
(Even in buried layers)  
Vcc  
OUT N.C.  
6
5
4
6
4
4
5
6
PLE  
.05  
.05  
(1.3)  
(1.3)  
1
3
2
1
2
3
1
3
Vcon  
GND  
*
.560 (14.23) MAX  
.200 (5.08)  
*VC22H: Pin 2 N.C. (do NOT connect to Pin 2)  
.15 (3.8)  
*VC32H: Pin 2 E/D  
July 2002  
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com  
24  
Pl tronics, Inc.  

相关型号:

VC32H100AX-FREQ

CMOS Output Clock Oscillator, 1.5MHz Min, 200MHz Max
PLETRONICS

VC32H100AX-FREQ-OUT21

CMOS Output Clock Oscillator, 1.5MHz Min, 200MHz Max
PLETRONICS

VC32H100AY-1.5MHZ

Crystal Oscillator
ETC

VC32H100AY-60MHZ

Crystal Oscillator
ETC

VC32H100AZ-1.5MHZ

Crystal Oscillator
ETC

VC32H100AZ-60MHZ

Crystal Oscillator
ETC

VC32H100AZ-FREQ-OUT21

CMOS Output Clock Oscillator, 1.5MHz Min, 200MHz Max
PLETRONICS

VC32H100B-1.5MHZ

Crystal Oscillator
ETC

VC32H100B-60MHZ

Crystal Oscillator
ETC

VC32H100BT-1.5MHZ

Crystal Oscillator
ETC

VC32H100BT-200.0M

VCXO, Clock, 1.5MHz Min, 200MHz Max, 200MHz Nom
PLETRONICS

VC32H100BT-60MHZ

Crystal Oscillator
ETC