P502-25SC [PLL]

Low Phase Noise VCXO (12MHz to 27MHz); 低相位噪声压控石英振荡器( 12MHz时为27MHz时)
P502-25SC
型号: P502-25SC
厂家: PHASELINK CORPORATION    PHASELINK CORPORATION
描述:

Low Phase Noise VCXO (12MHz to 27MHz)
低相位噪声压控石英振荡器( 12MHz时为27MHz时)

振荡器 石英晶振 压控振荡器
文件: 总4页 (文件大小:199K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PLL502-25  
Low Phase Noise VCXO (12MHz to 27MHz)  
FEATURES  
PIN CONFIGURATION  
Low phase noise VCXO output for the 12MHz to  
27MHz range (-135 dBc at 10kHz offset).  
CMOS output.  
XOUT  
VDD  
XIN  
N/C  
N/C  
CLK  
1
2
3
4
8
7
6
5
12 to 27MHz crystal input.  
Integrated variable capacitors.  
Wide pull range (+/- 250 ppm).  
Low jitter (RMS): 2.2ps period.  
2.5V or 3.3V operation voltage.  
Available in 8-Pin SOIC.  
VCON  
GND  
DESCRIPTION  
The PLL502-25 is a low cost, high performance and  
low phase noise VCXO, providing less than -135dBc  
at 10kHz offset in the 12MHz to 27MHz operating  
range. The very low jitter (2.2 ps RMS period jitter)  
makes this chip ideal for applications requiring volt-  
age controlled frequency sources. Input crystal can  
range from 12 to 27MHz (fundamental resonant  
mode).  
OUTPUT RANGE  
FREQUENCY  
RANGE  
OUTPUT  
BUFFER  
MULTIPLIER  
No PLL  
12 - 27MHz  
CMOS  
BLOCK DIAGRAM  
XIN  
XOUT  
XTAL  
OSC  
CLK  
VARICAP  
VCON  
OE  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/17/04 Page 1  
PLL502-25  
Low Phase Noise VCXO (12MHz to 27MHz)  
PIN DESCRIPTIONS  
Name  
Number  
Type  
Description  
XOUT  
VDD  
VCON  
GND  
CLK  
1
2
3
4
5
6
7
8
I
P
I
Crystal output. See Crystal Specification on page 3.  
Power supply.  
Voltage Control input.  
P
O
-
Ground.  
Output clock.  
N/C  
No connection.  
N/C  
-
No connection.  
XIN  
I
Crystal input. See Crystal Specification on page 3.  
ELECTRICAL SPECIFICATIONS  
1. Absolute Maximum Ratings  
PARAMETERS  
SYMBOL  
MIN.  
MAX.  
UNITS  
Supply Voltage  
VDD  
VI  
4.6  
VDD+0.5  
VDD+0.5  
150  
V
Input Voltage, dc  
-0.5  
-0.5  
-65  
V
Output Voltage, dc  
VO  
TS  
TA  
TJ  
V
Storage Temperature  
°C  
°C  
°C  
°C  
kV  
Ambient Operating Temperature*  
Junction Temperature  
-40  
85  
125  
Lead Temperature (soldering, 10s)  
ESD Protection, Human Body Model  
260  
2
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the  
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other  
conditions above the operational limits noted in this specification is not implied.  
* Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only.  
2. DC Electrical Specifications  
PARAMETERS  
SYMBOL  
CONDITIONS  
MIN.  
TYP.  
MAX.  
UNITS  
Supply Current, Dynamic, with  
Loaded Outputs  
FXIN = 12 - 25MHz  
Output load of 10pF  
IDD  
16  
20  
mA  
Operating Voltage  
VDD  
IOH  
IOL  
2.25  
10  
3.63  
V
VOH= VDD-0.4V, VDD=3.3V  
VOL = 0.4V, VDD = 3.3V  
mA  
mA  
mA  
V
Output drive current  
10  
Short Circuit Current  
VCXO Control Voltage  
±50  
VCON  
0
VDD  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/17/04 Page 2  
PLL502-25  
Low Phase Noise VCXO (12MHz to 27MHz)  
3. AC Electrical Specifications  
PARAMETERS  
SYMBOL  
CONDITIONS  
MIN.  
TYP.  
MAX.  
UNITS  
Input Crystal Frequency  
Output Clock Rise/Fall Time  
Output Clock Duty Cycle  
12  
27  
MHz  
ns  
0.3V ~ 3.0V with 15 pF load  
Measured @ 50% VDD  
2.4  
50  
45  
55  
%
4. Voltage Control Crystal Oscillator (3.3V)  
PARAMETERS  
SYMBOL  
CONDITIONS  
From power valid  
MIN.  
TYP.  
MAX.  
UNITS  
VCXO Stabilization Time *  
TVCXOSTB  
10  
ms  
FXIN = 12 – 25MHz;  
XTAL C0/C1 < 250  
0V VCON 3.3V  
VCXO Tuning Range  
500  
150  
ppm  
CLK output pullability  
VCXO Tuning Characteristic  
Pull range linearity  
ppm  
ppm/V  
%
VCON=1.65V, ±1.65V  
±200  
10  
VCON pin input impedance  
VCON modulation BW  
2000  
25  
kΩ  
kHz  
0V VCON 3.3V, -3dB  
Note: Parameters denoted with an asterisk (*) represent nominal characterization data and are not production tested to any specific limits.  
5. Jitter and Phase Noise specification  
PARAMETERS  
RMS Period Jitter  
CONDITIONS  
MIN.  
TYP.  
MAX.  
UNITS  
with capacitive decoupling between  
VDD and GND.  
2.2  
ps  
(1 sigma – 1000 samples)  
Phase Noise relative to carrier  
Phase Noise relative to carrier  
27MHz @100Hz offset  
27MHz @1kHz offset  
27MHz @10kHz offset  
27MHz @100kHz offset  
27MHz @1MHz offset  
-95  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
-120  
-142  
-150  
-150  
Phase Noise relative to carrier  
Phase Noise relative to carrier  
Phase Noise relative to carrier  
6. Crystal Specifications  
PARAMETERS  
SYMBOL  
MIN.  
12  
TYP.  
MAX.  
UNITS  
Crystal Resonator Frequency  
FXIN  
27  
MHz  
pF  
-
Crystal Loading Capacitance Rating  
CL (xtal)  
9.5  
C0/C1  
ESR  
250  
30  
RS  
Note: Crystal Loading rating: 9.5pF is the loading the crystal sees from the VCXO chip at VCON = 1.65V. It is assumed that the crystal will be at  
nominal frequency at this load. If the crystal requires more load to be at nominal frequency, the additional load must be added externally.  
This however may reduce the pull range.  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/17/04 Page 3  
PLL502-25  
Low Phase Noise VCXO (12MHz to 27MHz)  
PACKAGE INFORMATION  
8 PIN ( dimensions in mm )  
Narrow SOIC  
E
H
Symbol  
Min.  
Max.  
1.73  
0.25  
0.51  
0.25  
4.95  
4.00  
6.20  
1.27  
A
A1  
B
C
D
E
1.47  
0.10  
0.33  
0.19  
4.80  
3.80  
5.80  
0.38  
D
H
L
A
A
1
C
e
1.27 BSC  
L
B
e
ORDERING INFORMATION  
For part ordering, please contact our Sales Department:  
47745 Fremont Blvd., Fremont, CA 94538, USA  
Tel: (510) 492-0990 Fax: (510) 492-0991  
PART NUMBER  
The order number for this device is a combination of the following:  
Device number, Package type and Operating temperature range  
PLL502-25 x x  
Part Number  
Temperature  
C=Commercial  
Package  
S=SOIC  
Order Number  
Marking  
Package Option  
PLL502-25SC  
PLL502-25SC-R  
P502-25SC  
P502-25SC  
8-Pin SOIC (Tube)  
8-Pin SOIC (Tape and Reel)  
PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information fur-  
nished by Phaselink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said  
information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product.  
LIFE SUPPORT POLICY: PhaseLink’s products are not authorized for use as critical components in life support devices or systems without the ex-  
press written approval of the President of PhaseLink Corporation.  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 09/17/04 Page 4  

相关型号:

P502-26SC

High Pull-Range VCXO (27MHz) with integrated Audio PLL
PLL

P502-30DC

750kHz - 800MHz Low Phase Noise VCXO (for 12 - 25MHz Crystals)
PLL

P502-35OC

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-35OCL

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-35QC

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-35QCL

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-37OC

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-37OCL

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-37QC

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-37QCL

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-38OC

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL

P502-38OCL

750kHz - 800MHz Low Phase Noise Multiplier VCXO
PLL