SCP600-27MSC [PLL]

Dual XO with 4 CMOS Outputs 10MHz to 52MHz; 双XO有4个CMOS输出10MHz至52MHz的
SCP600-27MSC
型号: SCP600-27MSC
厂家: PHASELINK CORPORATION    PHASELINK CORPORATION
描述:

Dual XO with 4 CMOS Outputs 10MHz to 52MHz
双XO有4个CMOS输出10MHz至52MHz的

石英晶振
文件: 总4页 (文件大小:192K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
Preliminary PLL600-27M  
Dual XO with 4 CMOS Outputs 10MHz to 52MHz  
FEATURES  
PIN ASSIGNMENT  
Generates 4 CMOS outputs from 2 crystal inputs  
XIN1- Accepts a 10 to 52MHz crystal input  
and generates 1 CMOS output at the same  
frequency.  
XIN2- Accepts a 10 to 52MHz crystal input  
and generates 3 CMOS outputs at the same  
frequency.  
Low phase noise (-130 dBc @ 10kHz offset).  
Low jitter (RMS): 2.5ps period jitter.  
12mA drive capability at TTL output.  
1.62V to 3.63V DC operation.  
XIN1  
GND  
1
2
3
4
5
6
7
14  
13  
12  
11  
10  
9
XOUT1  
N/C  
GND  
VDD  
CLK2A  
VDD  
CLK1  
GND  
Available in 14 pin 150mil SOIC.  
CLK2B  
XOUT2  
CLK2C  
XIN2  
DESCRIPTION  
8
The PLL600-27M is part of PhaseLink ’s low cost  
family of XO IC’s, designed to replace multiple XO  
solutions saving the cost and board space of clock  
distribution buffers. In addition, this product family  
provides among the lowest current on the market for  
the 10MHz to 52MHz range. They accept input  
crystals from 10MHz to 52MHz (fundamental  
resonant mode) and provide low phase noise (<-  
130dBc at 10kHz offset at 30MHz), and very low  
jitter (2.5 ps RMS period jitter) outputs.  
BLOCK DIAGRAM  
XIN1  
XOUT1  
XTAL  
OSC  
CLK1  
CLK2A  
CLK2B  
CLK2C  
XTAL  
OSC  
XIN2  
XOUT2  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 08/12/04 Page 1  
Preliminary PLL600-27M  
Dual XO with 4 CMOS Outputs 10MHz to 52MHz  
PIN DESCRIPTION  
Name  
Pin #  
Type  
Description  
XIN1  
GND  
1
2,3,10  
4,6,9  
5,12  
7
I
Crystal input.  
P
O
P
O
I
Ground.  
CLK2[A:C]  
VDD  
Buffered output from XIN2 crystal input.  
Power supply.  
XOUT2  
XIN2  
Crystal output for XIN2 crystal.  
Crystal input.  
8
CLK1  
11  
O
-
Buffered output from XIN1 crystal input.  
No connection.  
N/C  
13  
XOUT1  
14  
O
Crystal output for XIN1 crystal.  
ELECTRICAL SPECIFICATIONS  
1. Absolute Maximum Ratings  
PARAMETERS  
SYMBOL  
MIN.  
MAX.  
UNITS  
Supply Voltage  
VDD  
VI  
4.6  
VDD+0.5  
VDD+0.5  
150  
V
Input Voltage, dc  
-0.5  
-0.5  
-65  
V
Output Voltage, dc  
VO  
TS  
TA  
TJ  
V
Storage Temperature  
°C  
°C  
°C  
°C  
kV  
Ambient Operating Temperature*  
Junction Temperature  
-40  
85  
125  
Lead Temperature (soldering, 10s)  
ESD Protection, Human Body Model  
260  
2
Exposure of the device under conditions beyond the limits specified by Maximum Ratings for extended periods may cause permanent damage to the  
device and affect product reliability. These conditions represent a stress rating only, and functional operations of the device at these or any other  
conditions above the operational limits noted in this specification is not implied.  
* Note: Operating Temperature is guaranteed by design for all parts (COMMERCIAL and INDUSTRIAL), but tested for COMMERCIAL grade only.  
2. AC Electrical Specifications  
PARAMETERS  
CONDITIONS  
MIN.  
TYP.  
MAX.  
52  
UNITS  
MHz  
ms  
Input Crystal Frequency  
( XIN1 and XIN2 )  
10  
At power-up  
(Vdd reaches 1.62V)  
Settling time  
10  
0.8V ~ 2.0V with 10 pF load  
0.3V ~ 3.0V with 15 pF load  
Frequency vs. VDD +/- 10%  
Measured @ 1.4V  
1.15  
2.4  
Output Clock Rise/Fall Time  
ns  
VDD sensitivity  
0.8  
45  
0.8  
55  
ppm  
%
Output Clock Duty Cycle  
Short Circuit Current  
50  
mA  
±50  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 08/12/04 Page 2  
Preliminary PLL600-27M  
Dual XO with 4 CMOS Outputs 10MHz to 52MHz  
3. Jitter and Phase Noise Specifications  
PARAMETERS  
RMS Period Jitter  
CONDITIONS  
MIN.  
TYP.  
MAX.  
UNITS  
With capacitive decoupling  
between VDD and GND.  
2.1  
2.5  
ps  
(1 sigma – 1000 samples)  
Phase Noise relative to carrier  
Phase Noise relative to carrier  
30MHz @100Hz offset  
30MHz @1kHz offset  
30MHz @10kHz offset  
30MHz @100kHz offset  
30MHz @1MHz offset  
-80  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
dBc/Hz  
-110  
-130  
-138  
-145  
Phase Noise relative to carrier  
Phase Noise relative to carrier  
Phase Noise relative to carrier  
4. DC Specifications  
PARAMETERS  
SYMBOL  
CONDITIONS  
MIN.  
TYP.  
6.0  
MAX.  
UNITS  
Supply Current, Dynamic,  
with Loaded Outputs  
@ 3.3V  
XIN1 and XIN2 at 27MHz,  
Cload=10pF  
IDD  
mA  
Supply Current in tri-state  
Operating Voltage  
IDD  
VDD  
VOH  
VOL  
Output disabled  
520  
µA  
V
1.62  
2.4  
3.63  
Output High Voltage  
Output Low Voltage  
IOH = -12mA (3.3V)  
IOL = 12mA (3.3V)  
V
0.4  
V
Output High Voltage at  
CMOS level  
Output drive current  
VOHC  
IOH = -4mA (3.3V)  
At TTL level (3.3V)  
VDD – 0.4  
10  
V
mA  
5. Crystal Specification  
PARAMETERS  
SYMBOL  
MIN.  
TYP.  
MAX.  
UNITS  
FXIN1  
FXIN2  
Crystal Resonator Frequency  
Crystal Loading Rating  
10  
52  
MHz  
CL (xtal)  
8.5  
50  
pF  
µW  
µW  
pF  
Maximum Sustainable Drive Level  
Operating Drive Level  
200  
C0 (for frequencies below 30MHz)  
C0 (for frequencies above 30MHz)  
ESR  
5
4
pF  
RS  
30  
Note: A detailed crystal specification document is also available for this part  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 08/12/04 Page 3  
Preliminary PLL600-27M  
Dual XO with 4 CMOS Outputs 10MHz to 52MHz  
PACKAGE INFORMATION  
14 PIN Narrow SOIC ( mm )  
SOIC  
E
H
Symbol  
Min.  
1.35  
0.10  
0.33  
0.19  
9.80  
3.80  
5.80  
0.40  
Max.  
1.75  
0.25  
0.51  
0.25  
10.00  
4.00  
6.20  
1.27  
A
A1  
B
C
D
E
D
H
L
A
A1  
e
1.27 BSC  
C
L
B
e
ORDERING INFORMATION  
For part ordering, please contact our Sales Department:  
47745 Fremont Blvd., Fremont, CA 94538, USA  
Tel: (510) 492-0990 Fax: (510) 492-0991  
PART NUMBER  
The order number for this device is a combination of the following:  
Device number, Package type and Operating temperature range  
PLL600-27M S C  
TEMPERATURE  
C=COMMERCIAL  
I=INDUSTRIAL  
PART NUMBER  
PACKAGE TYPE  
S=SOIC  
Order Number  
Marking  
Package Option  
PLL600-27M SC  
PLL600-27M SC-R  
P600-27M SC  
P600-27M SC  
SOIC - Tube  
SOIC - Tape and Reel  
PhaseLink Corporation, reserves the right to make changes in its products or specifications, or both at any time without notice. The information  
furnished by PhaseLink is believed to be accurate and reliable. However, PhaseLink makes no guarantee or warranty concerning the accuracy of said  
information and shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon this product.  
LIFE SUPPORT POLICY: PhaseLink’s products are not authorized for use as critical components in life support devices or systems without the  
express written approval of the President of PhaseLink Corporation.  
47745 Fremont Blvd., Fremont, California 94538 Tel (510) 492-0990 Fax (510) 492-0991 www.phaselink.com Rev 08/12/04 Page 4  

相关型号:

SCP6C60

Silicon Controlled Rectifiers
SEMIWELL

SCP7PT78HPL1PLS06E

Single Color LED,
SAMSUNG

SCP7TT78HEL1TLS06E

Single Color LED,
SAMSUNG

SCP7TT78HPL1TLS06E

Single Color LED,
SAMSUNG

SCP7TTJ5HEL1TLPF6E

Single Color LED,
SAMSUNG

SCP8PT78HPL1P0S06E

Single Color LED,
SAMSUNG

SCP8PTF1HEL1PKM34E

Single Color LED,
SAMSUNG

SCP8WT78HEL1WLS06E

Single Color LED,
SAMSUNG

SCP9RTF1HEL1RKH34E

Single Color LED,
SAMSUNG

SCP9WT78HPL1WUS06E

Single Color LED,
SAMSUNG

SCPA05

STANDARD RECOVERY DOUBLER AND CENTER TAPS
SEMTECH

SCPA05F

FAST RECOVERY DOUBLER AND CENTER TAPS
SEMTECH