5068 [POMONA]
Stress Relief Boot W/BNC Male Connector; 应力消除启动W / BNC公连接器
| 型号： | 5068 |
| 厂家： | 
POMONA ELECTRONICS |
| 描述： | Stress Relief Boot W/BNC Male Connector |
| 文件： | 总2页 (文件大小：104K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Model 5068 Stress Relief Boot
W/BNC Male Connector
RG 174, 187 & 188
MATERIALS:
BNC Male
Body and Fittings Brass per QQ-B-626, Alloy 360, ½ Hard.
Center Contact Brass per QQ-B-626, Alloy 360, ½ Hard.
Dielectric (Front Insulator and Rear Insulator) Teflon per ASTM D1457.
Vee Gasket Silicone rubber per QQ-R-765, Class 11A, Grade 50.
Clamp Nut, Washer and Spacer Brass per QQ-B-626, Alloy 360, ½ Hard.
Finish:
Body and Fittings Tarnish resistant
Center Contact Gold plated per requirements of MIL-C-39012
Clamp Nut Nickel-plated per QQ-N-290, Class 2, 200/300 micro inches.
Stress Relief Boot
Boot PVC. Marking: POMONA ELECTRONICS
RATINGS:
Operating Temperature: +50°C. (+122°F.) Max.
Operating Voltage: 500 VRMS
ORDERING INFORMATION: Model 5068-*
*= Color, Standard Colors: -0 Black, additional colors can be quoted upon request.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm), .xxx = ± .005 (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (technicalsupport@pomonatest.com)
For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 001
D1094642, D1094540
Page 1 of
2
Model 5068 Stress Relief Boot
W/BNC Male Connector
RG 174, 187 & 188
FIGURE #1
A. Slide strain relief, clamp nut and washer over cable.
B. Trim outer jacket from cable.
C. Slide center conductor, dielectric and braid through braid clamp.
FIGURE #2
D. Fold back braid back over braid clamp and trim braid.
E. Slide V-Gasket over center conductor and dielectric on top of braid clamp.
FIGURE #3
F. Slide spacer and rear insulator over center conductor and dielectric.
G. Strip dielectric from center conductor.
H. Slide contact onto center conductor and solder.
FIGURE #4
I. Place front insulator into connector body.
J. Assemble connector body.
All dimensions are in inches. Tolerances (except noted): .xx = ±.02 (,51 mm), .xxx = ± .005 (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies.
Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 (technicalsupport@pomonatest.com)
For Where to Buy information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 001
D1094642, D1094540
Page 2 of
2
相关型号：
©2020 ICPDF网 联系我们和版权申明