ABC300-1T30G [POWER-ONE]
200 W convection cooled, Inhibit and Power Good signals; 200瓦对流冷却，抑制和电源良好信号
| 型号： | ABC300-1T30G |
| 厂家： | 
POWER-ONE |
| 描述： | 200 W convection cooled, Inhibit and Power Good signals |
| 文件： | 总5页 (文件大小：552K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DATA SHEET
ABC300 SERIES 300W AC/DC
.
.
.
.
.
.
.
.
.
200 W convection cooled
-20 to 50 deg C full load operation
3” x 5“ x 1.5” (76.2 x 127 x 38.1 mm)
No minimum load required
FEATURES
12 V fan & 5 V standby outputs
Inhibit and Power Good signals
Conducted EMI EN 55022-B, FCC Part 15 Level B
ITE Safety Agency Approvals
RoHS Compliant
APPLICATIONS
Instrumentation
Lighting
Renewable Energy
Data Comm.
Industrial Applications
Test and Measurement
Robotics
Applied Computing
Process Control
Wireless
BCD.00285_AA_September-18-2013
1
www.power-one.com
DATA SHEET
TECHNICAL DATA:
Input
PARAMETER
DESCRIPTION/CONDITION
90 - 264 Vac
Input voltage range
Universal Input
120 – 390 Vdc
Input frequency range
Input surge current
47-63 Hz
230 Vac (cold start)
230 Vac
65 A max.
Safety ground leakage current
300 μA max
120 Vac @ 200 W
230 Vac @ 200 W
3.2 A
1.65 A
Input current
Output
PARAMETER
DESCRIPTION/CONDITION
Voltage Adjustment
V1
± 3%
Main output 50 to 100% load change, 50 Hz,
50% duty cycle, 0.1 A / uSec, 50/60 Hz.
Transient Response
< 10%, recovery time < 5 mSec
Over Voltage Protection
Over Current Protection
Short Circuit Protection
Over Temperature Protection
Set point tolerance
V1
110 to 150% rated max
110 to 150% Typical
Rated output current
Automatic recovery
Automatic recovery
± 1%
110° C primary heatsink
Rise Time
<100 mSec
Ordering Information
VOLTS
MAX LOAD
MAX LOAD MINIMUM RIPPLE &
TOTAL
REGULATION
PRODUCT FAMILY
CONNECTOR
(VDC) CONVECTION (2) 300 LFM (2) LOAD (A) NOISE (4)
ABC300-1T05G
ABC300-1T12G
ABC300-1T15G
ABC300-1T24G
ABC300-1T30G
ABC300-1T48G
Vfan (all models)
V s/b (all models)
5
28.0 A
15.0 A
12.0 A
7.5 A
6.0
40.0 A
25.0 A
20.0 A
13.54 A
10.83 A
6.77 A
0.5 A
0
0
0
0
0
0
0
0
2%
2%
2%
2%
2%
2%
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
Screw Terminal
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 2.5%
± 20%
± 5%
12
15
24
30
48
12
5
3.75 A
0.5 A
2.0 A
2.0 A
Notes:
1. Peak current rating of 120% of max, < 30 Sec with max of 10% duty cycle.
2. Combined power from main output, Vfan and Vs/b should not exceed total power rating.
3. Fan output tolerance is ± 20%. When V1 full load, Vfan needs 20 mA load to be within regulation specification. Peak
current for fan output is 1 A.
4. Ripple is 2% up to 20% load and less than 1% above 20% load. Output noise measurement is made with a 20 MHz
bandwidth using a 6” twisted pair, terminated with a 10 uF tantalum capacitor in parallel with a 0.1 uF ceramic capacitor.
5. Specifications are for nominal input voltage, 25° C and max load unless otherwise stated.
ABC300 Series
2
www.power-one.com
DATA SHEET
6. Class 1 models have Earthing tab J4. Class 2 models (-2 suffix) have no Earthing tab.
7. Derate power linearly to 80% from 90 Vac to 80 Vac input.
8. Power supply shipped with J3 pin 1 and 2 shorted to enable main output
9. Specifications subject to change without notice.
10. Air flow over long edge (either direction) required for air flow rating. See mechanical drawing below.
11. Warranty 2 years.
General Specifications
PARAMETER
DESCRIPTION/CONDITION
120 Vac
230 Vac
>250 khrs
10 mSec
Hold Up Time
10 mSec
MTBF
Bellcore TR-332
Resonant converter: Variable 35 to 250
kHz, 90 kHz typical
Switching Frequency
PFC converter 80 kHz typical
Isolation Voltage
Weight
Min 5900 Vdc
Input to Output
450 g (0.99 lbs)
Environmental
PARAMETER
DESCRIPTION/CONDITION
Operating
-20 to 70° C. See derating charts below.
-40 to +85° C.
Operating Temperature
Storage
Altitude
Operating 10,000 ft.
EN55022, FCC part 15 Level B
EN55022, FCC part 15 Level B
EN61000-4 3
Non-operation 40,000 ft.
Conducted emissions:
Radiated Emissions
Electromagnetic Susceptibility
Harmonic Current
To be controlled in end system
2, 3, 4, 5 level 3
EN61000-3-2, Class D
Signals
PARAMETER
Power Good
Inhibit
DESCRIPTION/CONDITION
TTL signal goes high after main output is within regulation, delay is 0.1 to 0.3 sec
To turn on power supply short J3 pin 1 to J3 pin 2 or J3 pin 7
Compensates for 200 mV drop
Remote Sense
Safety
PARAMETER
EN / UL / CSA
DESCRIPTION/CONDITION
EN60950-1+A12:2011, IEC60950-1 2nd+A1 2009, CSA-22.2 No 60950-01-07+ A1, UL60950-
1-2011
BCD.00285_AA_September-18-2013
3
www.power-one.com
DATA SHEET
Figure 1 Output Power Vs. Temperature
Figure 2 Dimension Drawing (Top and Side View)
ABC300 Series
4
www.power-one.com
DATA SHEET
Mechanical
INPUT = J1
EARTHING TAB = J4
DC OUTPUT = J2
SIGNALS & AUX POWER= J3
Pin 1 = Inhibit
Pin 5 = Vs/b (5 Vdc)
Pin 6 = + Remote Sense
Pin 7 = Signal Return
Pin 8 = Power Good
2 x 6-32 inches pan head screw
Pin 1 = RTN
Pin 2 = V1
Pin 1: AC Line
Pin 2: AC Neutral
Pin 2 = Signal Return
Pin 3 = Vfan (+12 V)
Pin 4 = - Remote Sense
Molex: 19705-4301
Mating Connector:
16 AWG wire crimped to Ring Mating Connector:
Tongue Terminal.
AMP: 8-31886-1
Mating Connector:
Molex: 09-50-3031
Pins: 08-50-0106
Mating Connector:
Molex: 190030001
Molex: 22-01-2087, Pins: 08-50-0113
Copyright © 2010 Power-One Inc. All rights reserved. Words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the
trademarks and service marks of Power-One Inc. in the U.S. and other countries. All other product or service names are the property of their respective holders.
Power-One products are protected under numerous U.S. and foreign patents and pending applications, maskwork rights, and copyrights. Power-One reserves the
right to make changes to any products and services at any time without notice. Power-One assumes no responsibility or liability arising out of the application or use
of any information, product, or service described herein except as expressly agreed to in writing by Power-One Inc.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical components in life sup-
port systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the respective divisional president of
Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufac-
tured. Specifications are subject to change without notice.
BCD.00285_AA_September-18-2013
5
www.power-one.com
相关型号：
©2020 ICPDF网 联系我们和版权申明