PMP7 [POWER-ONE]
Rectifier Module; 整流模块型号: | PMP7 |
厂家: | POWER-ONE |
描述: | Rectifier Module |
文件: | 总2页 (文件大小:55K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PMP 7
Rectifier Module
Description
The Power-One PMP 7 rectifier module
provides a cost-effective power solution
in the highest possible density. Built on
the latest advances in the resonance
switch mode approach (soft-switching),
the PMP 7 is the next evolution in our
small convection cooled rectifier series.
Optimized for telecom applications, the
module is designed to work in a multitude
of different subrack/shelf configurations
incorporating the Power-One PCU
controller and various distribution
options.
Features
•
•
•
•
•
•
•
•
•
•
208/240 VAC input
24V, 48V, or 60V DC output
Input overvoltage disconnection
Thermal protection
Active load sharing
Hot-swappable
Up to 92% efficient
International standards compliance
Natural convection cooling
Low weight
PPS 7 3500 System
Shown
www.power-one.com
PMP 7
Rectifier Module
Mechanical
Dimensions
Input
62 x 129 x 232mm
(2.4 x 5.1 x 9.1in.)
Model
PMP 7.24
PMP 7.48
PMP 7.60
205-250V AC ±10% single phase,
(44-66Hz) (-15% for PMP7.60)
185-160V at reduced output power
Input
Voltage
Weight
1.65kg (3.6lbs.)
Cooling
Natural convection
Current
(max.)
<3.55A
<4.35A
<4.35A
Reinforced insulation tested at:
4.25 kV DC primary-secondary,
2.12 kV DC primary-ground,
0.75 kV DC secondary ground
Insulation
<11A peak
max. 5ms
<15.5A peak <20A peak
max. 5ms max. 5ms
Soft Start
EN 61000-3-2
Power Factor >0.99 at max. load
Enclosure
Mounting
IP20
Harmonics
In 19” subrack up to 5 modules
Surge
Immunity
EN 61000-4-5
Fuse
T 6,3A
Other Technical Data
Connection IEC-320/C14
EN 60950
Safety
UL 1950 and IEC60950 , Class 1
CSA C22-2 No. 950
EN 61000-6-2, EN 61000-6-3,
FCC Part 15 Class B
EMC
Short circuit proof, automatic
current limiting, selective shutdown
of modules at excessive output
voltage. Thermal protection
reduces the output power at
environmental temperatures above
maximum level. Shut down at
>75°C with an automatic restart.*
Input over-voltage disconnection at
>275VAC with automatic reset at
>260VAC.
Output
Model
PMP 7.24
PMP 7.48
PMP 7.60
Protection
Output
Voltage
22.5-28VDC 45-56VDC 56-70.5VDC
Power (max.)
560W
20A
672W
12A
635W
9A
Current
(max.)
Green LED
Red LED
Power ON
Efficiency
(at 40-90% load)*
>89.5%
>92%
>92%
High output
Indications
voltage/ shutdown
Tolerance
Vout +/- 1%
Red LED
Low voltage/
module failure
Transient
Response
+/- 5% at load variation 10-90%
or 90-10%, recovery time 10ms
Audible
Noise
Load Sharing <5% of nominal current
Ripple <100mV p-p (BW. 30MHz)
Psophometric <2mV, according to CCITT norms
<35dBA
Operating
Temperature*
-25 to +55°C up to 2000m
-25 to +45°C above 2000m
Storage
Temperature
-40 to +85°C
Connection
EMC
DIN 41612F
EN 61000-6-2, EN 61000-6-3,
FCC Part 15, Class B
Radiated EMC
Environment
EN 61000-6-2, EN 61000-6-4
*Average performance for a single module.
Storage:
ETS 300 019-2-1
ETS 300 019-2-2
ETS 300 019-2-3
Transport:
Operation:
Note: All specifications are subject to change without notification.
www.power-one.com
11V0005-028 PMP 7 V3.0
相关型号:
©2020 ICPDF网 联系我们和版权申明