PPS25.24 [POWER-ONE]
Cabinet System; 机柜系统PPS 25 Power System
Cabinet System
Description
PPS 25 modular DC power cabinet systems are
designed to meet rigid telecom applications with
very high reliability and flexibility for future
expansion.
These cabinet power solutions
provide rectification, system management and
power distribution while allowing configurable
solutions within the same cabinet or through the
use of external distribution cabinets. The PPS 25
systems are based on hot-swappable fan-cooled
PMP 25 rectifier modules with constant output
power available at 24V/110A or 48V/50A per
module.
System management is accomplished through
messages and alarms displayed on the system
controller’s (PCS) LCD screen and can also be
TM
displayed remotely via the PC-based PowCom
software package.
Features
•
•
•
•
High reliability
Simple installation and operation
LCD display for self-guided controller operation
Interfaces standards include RS232, and Form
“C” dry alarm contacts with grouped alarms
Up to 1200A per cabinet
•
•
•
Live expansion up to 6400A
Plug-in ready for various DC distributions and
subracks
•
•
Inter-cabinet DC paralleling bus
Site programmable supervision unit
•
•
Intelligent battery management
Optional Ethernet (SNMP compatible) interface
module
•
International standards compliance
www.power-one.com
System Configurations
PPS 25 with integrated
DC distribution
PPS 25 with bulk
outputs feeding remote
DC distributions
PPS 25 System
The PPS 25 system offers flexible solutions that fit a large number of site
requirements. Some of these features include:
•
•
Easy configuration with internal or remote DC distribution
Internal DC bus for simple plug-in of load distribution modules, battery
breaker modules, and rectifier subracks
•
•
•
Inter-cabinet paralleling bus for live connection of expansion cabinets
Internal data bus for advanced system monitoring and control
Wide range of plug-in DC load distributions, low and high ohmic
PPS 25 Power System
Cabinet System
System Components
Rectifier Modules
The PPS 25 system utilizes plug-in rectifier modules that are
based on a soft-switching approach. Features include 3 LEDs
for rectifier status indication, thermal shutdown, and input
overvoltage disconnection with an automatic reset.
Power
(max.)
Model
Voltage
24V DC
48V DC
Current (max.)
110A at 28V DC
50A at 56V DC
PMP 25.24 SIC
PMP 25.48 SIC
3080W
2800W
PMP 25 Rectifier
Supervision Module
Advanced system supervision is accomplished using a microprocessor
based control module that allows both local and remote system monitoring.
PCS Features
•
•
•
•
•
•
•
•
•
•
Menu guided operation
RS232 interface for remote operation
Enhanced battery management and testing
Temperature compensation
Site programmable flash EPROM
PCS Supervision Module
100mm Cable Duct
Supervision for up to 128 rectifiers and 128 micro processors
Multiple language choices
Programmable alarms, logic functions, and operations
Monthly data logging
Optional Ethernet interface through SNMP and/or TCP/IP
Battery Breaker Modules
Plugable battery breaker
module, based on MCCB’s,
MCB’s or knife fuses
Cabinet
Innovative and flexible cabinet design.
Cabinet Features
•
In cabinet vertical DC bus allows live expansion of distribution
and rectifier modules
DC Distribution
Plugable load distribution
module, based on MCB’s,
MCCB’s or knife fuses. Low
or high ohmic.
•
•
•
•
Separate cable duct for output load cables
Inter cabinet DC bus for live cabinet expansion
Top or bottom cable entry
Matching DC distribution cabinets
PPS 25 Cabinet
PPS 25 Power System
Cabinet System
Input
Model
PPS 25 System
Input
230/400V 3-phase (site configurable)
Single input for each 6 rectifier positions
(4 inputs for 24 rectifier cabinets)
Inputs (max.)
Output
Rectifier Modules (max.)
24 (bulk output feed to battery and load)
Several battery breaker modules are available and are based on:
MCCB’s: 1x1500A, 2x600A, 4x384A
MCB’s: 12x100A
Battery Outputs
Knife fuses: 5xNH1-3
Several battery breaker modules are available and are based on:
MCCB’s: 1x1500A, 2x600A, 2x384A, 4x384A
MCB’s: 24x2-63A, 16x80-100A, 24x2-16A high ohmic
Knife fuses: 5xNH1-3, 9xNH00
Load Outs - MCB (2-63A)
24V DC Version
48V DC Version
Yes (max. 1200A per cabinet)
Yes
Features
Supervision
PCS
Expansion
Expansion Rack
Up to six subracks per cabinet, each with four rectifier modules
Expansion cabinet can be be placed to the left or right of existing
cabinets, allowing up to 128 rectifier modules
Expansion Cabinet
Battery
Battery Symmetry Inputs
4 (expandable to 12 by adding the optional interface circuit board)
Yes (through a trip coil in each MCCB or contactor)
Low Voltage Battery
Disconnection (LVBD)
Mechanical
Dimensions (WxHxD)
600x2150x600mm
Top and/or bottom for cables <50sq/mm (using cable duct)
Top or bottom entry for cables >50sq/mm
Cable Entry
Plug-in for multiple racks, A total of 35U is available for rectifier subracks, distribution, and battery
subracks, and PDU’s
breaker modules (29U at bottom cable entry)
Options
Temp. Comp. Charge
Yes
Yes
Yes
Yes
Yes
Partial Load Disconnect
Hinged Door Access
Ethernet Network
Interface
Modem Interface
Note: All specifications are subject to change without notification.
www.power-one.com
11V0005-039 PPS25 SY V3.0
相关型号:
©2020 ICPDF网 联系我们和版权申明