PSC-122000A-C [POWER-SONIC]
Rechargeable Sealed Lead Acid BatteryPS-General Purpose Series;
| 型号： | PSC-122000A-C |
| 厂家： | 
Power Sonic Corporation |
| 描述： | Rechargeable Sealed Lead Acid BatteryPS-General Purpose Series 电池 |
| 文件： | 总2页 (文件大小：338K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
UPS
Data Center
Telecomms
Fire &
Security
FEATURES
12V 8.5 AH @ 20-hr.
Absorbent Glass Mat (AGM) technology for superior
•
PSH-1280FR 36 W/Cell @ 15-min.
performance
Rechargeable Sealed Lead Acid Battery
PSH – High-Rate Series
Designed specifically for high-rate discharge applications
•
•
•
•
Valve regulated, maintenance free spill proof construction
TERMINALS (mm)
Exceptionally high energy density
F2: Quick disconnect tabs,
0.250" x 0.032" – Mate with
AMP. INC FASTON “250” series
Constant power (watts/cell)
Rugged vibration and impact resistant ABS case and
cover flame retardant to UL94-V0
•
2.5
APPROVALS
Approved for transport by air. D.O.T., I.A.T.A., F.A.A.
and C.A.B. certified
•
3.4
7.95
U.L recognized
•
ISO9001:2015 – Quality management systems
•
Torque – Not Applicable
DIMENSIONS inch (mm)
PERFORMANCE SPECIFICATIONS
Nominal Voltage
12 volts (6 cells)
36 W/Cell
L: 5.95 (151)
W: 2.56 (65)
H: 3.72 (94.5)
Nominal Power (15 min.)
HT: 3.90 (99)
Rated Capacity
W
Tolerances are +/- 0.04 in.
(+/- 1mm) and +/- 0.08 in.
(+/- 2mm) for height
dimensions. All data subject
to change without notice.
20-hr.
10-hr.
5-hr.
(400mA to 10.50 volts)
8.50 AH
8.10 AH
7.50 AH
5.27 AH
4.38 AH
(810mA to 10.50 volts)
(1.50A to 10.20 volts)
(5.27A to 9.00 volts)
(17.5A to 9.00 volts)
1-hr.
15-min.
Approximate Weight
5.75 lbs. (2.61 kg)
15.0 milliohms
25.5 amperes
85.0 amperes
Internal Resistance (approx.)
Max Discharge Current (5 Sec.)
Max Short-Duration Discharge Current (10 Sec.)
HT
H
MODEL PSH-1280F2-FR
(UL94 V-O flame retardant)
Shelf Life (% of nominal capacity at 68°F (20°C)
12 Volt 8.5 Amp. Hr.
37 Watts per Cell
1 Month
3 Month
6 Month
97%
91%
83%
Pb
MH20845
NONSPILLABLE
L
Operating Temperature Range
5°F (-15°C) to 122°F (50°C)
-4°F (-20°C) to 140°F (60°C)
Charge
Discharge
Flame Retardant ABS Plastic
UL94:V-0
Case and Cover
CORPORATE HEADQUARTERS
(USA AND INTERNATIONAL EXCLUDING EMEA)
Power-Sonic Corporation
7550 Panasonic Way, San Diego,
California 92154
POWER-SONIC EUROPE LIMITED
(EMEA – EUROPE, MIDDLE EAST AND AFRICA)
3 Buckingham Square,
Hurricane Way, Wickford,
Essex SS11 8YQ
PSC-12800A-C
PSC-121000-PC
PSC-122000-PC
Power Sonic Chargers
T: +1 (619) 661 2020
T: +44 (0)1268 560686
F: +1 (619) 661 3650
F: +44 (0)1268 560902
E: customer-service@power-sonic.com
E: salesEMEA@power-sonic.com
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
All data subject to change without notice. E&O.E
www.power-sonic.com
12V 8.5 AH @ 20-hr.
PSH-1280FR 36W/Cell@15-min.
Rechargeable Sealed Lead Acid Battery
PSH – High-Rate Series
CONSTANT POWER DISCHARGE (WATTS/CELL) AT 25°C (77°F)
CHARGING
Watts per Cell @ 25°C (68°F)
Final
Model
Cycle Applications: Apply constant voltage charge at
2.35v/c – 2.45v/c (14.1 – 14.7v for 12v Monobloc) at 20°C.
Initial charging current should be set at less than 0.25C
Amps. Switch to float charge to avoid overcharging.
Voltage
5min 10min 15min 20min 30min 45min 60min
1.75
1.70
1.67
65
66
67
43
44
45
35
36
37
24
17.5
18.7
19.5
14.8
15
12.8
12.9
13
24.3
24.7
PSH-1280FR
15.5
“Float” or “Stand-By” Service: Apply constant voltage
charge of 2.25v/c – 2.30v/c (13.5 to 13.8 volts for 12v
Monobloc at 20°C. When held at this voltage, the battery
will seek its own current level and maintain itself in a fully
charged condition.
DISCHARGE CHARACTERISTICS
14.0
Ambient Temperature 20oC (68oF)
13.0
12.0
11.0
10.0
9.0
Temperature Compensation: Charging Voltage for both
Cyclic and Standby applications should be regulated in
relation to ambient temperature. As temperature rises
charging voltage should be reduced to prevent overcharge
and increased as temperature falls to avoid undercharge.
0.425
0.85
1.7
4.25
For further charging information including temperature
compensation factors, see Power Sonic Technical Manual/
Power Sonic Charger specifications.
Final
8.5
Voltage
8.0
17
1.2 2.4
6
12 24 36 48 1
min
2
4 6 8 10 20 4 0
h
APPLICATIONS
Discharge Time
UPS
Telecoms
•
•
•
•
Data Center
Fire and Security
SHELF LIFE & STORAGE
100
Charging is not
necessary unless
100% of capacity
is required.
CHARGERS
80
Power Sonic offers a wide range of chargers suitable
for batteries with a variety of capacities.
5oC
(41oF)
Charging before
use is necessary
to help recover
full capacity.
60
Please refer to our website for more information on
our switch mode and transformer type chargers.
Chargemayfail
to restore full
capacity. Do not
let batteries reach
this state.
30oC
20oC
40oC
(86oF)
(104oF)
(68oF)
40
0
Please contact our technical department for advice if
you have difficulty in locating a suitable charger.
0
2
4
6
8
10 12 14 16 18 20
Standing Period (Months)
FURTHER INFORMATION
Please refer to our website www.power-sonic.com
for a complete range of useful downloads, such as
product catalogs, material safety data sheets (MSDS),
ISO certification, etc.
CORPORATE HEADQUARTERS
(USA AND INTERNATIONAL EXCLUDING EMEA)
Power-Sonic Corporation
POWER-SONIC EUROPE LIMITED
(EMEA – EUROPE, MIDDLE EAST AND AFRICA)
3 Buckingham Square,
7550 Panasonic Way, San Diego,
California 92154
Hurricane Way, Wickford,
Essex SS11 8YQ
T: +1 (619) 661 2020
T: +44 (0)1268 560686
F: +1 (619) 661 3650
F: +44 (0)1268 560902
E: customer-service@power-sonic.com
E: salesEMEA@power-sonic.com
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website.
© 2018. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners.
All data subject to change without notice. E&O.E
www.power-sonic.com
相关型号：
PSC-2-1+
Combiner, 0.1MHz Min, 400MHz Max, 1dB Insertion Loss-Max, ROHS COMPLIANT, CASE A01, 8 PIN
MINI
PSC-2-1-75+
Combiner, 0.25MHz Min, 300MHz Max, 1dB Insertion Loss-Max, ROHS COMPLIANT, CASE A01, 8 PIN
MINI
PSC-2-1-75A+
Combiner, 1MHz Min, 200MHz Max, 0.6dB Insertion Loss-Max, ROHS COMPLIANT, CASE A06, 8 PIN
MINI
©2020 ICPDF网 联系我们和版权申明