PU50048/28 [POWERBOX]
4 0 0 - 5 0 0 WAT T S D C / D C I N D U S T R I A L C O N V E R T E R;型号: | PU50048/28 |
厂家: | Powerbox |
描述: | 4 0 0 - 5 0 0 WAT T S D C / D C I N D U S T R I A L C O N V E R T E R |
文件: | 总3页 (文件大小:243K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PU500
4 0 0 - 5 0 0 W AT T S D C / D C I N D U S T R I A L C O N V E R T E R
FEATURES
•
•
•
•
•
•
•
•
•
•
•
400W - 500W Industrial Converter
Optimized input voltage ranges
Input ranges from 18 to 300Vdc
Single outputs from 24 to 60Vdc
Reverse input voltage protection
Fully encapsulated meets IP20
Overvoltage Protection OVP
Extra output with series diode
Over/under voltage alarm with relay output
Output voltage adjustable from front panel
19' Rack Mount or DIN Mount or Wall Mount
SPECIFICATIONS
INPUT
FEATURES
24Vdc: 18-32Vdc
48Vdc: 38-60Vdc
110Vdc: 88-150Vdc
220Vdc: 175-300Vdc
The output voltage is limited to 15% over nominal
output voltage by a extra regulated circuit
Overvoltage protection OVP
Input voltages
External output voltage sense used when the
voltage regulation at the load is critical. The sense
can compensate voltage drops up to 5% of the
nominal voltage
Voltage Sense
Remote sense
Voltage Alarm
Inputs 24V, 48V, 72V with Parallel Diode
Inputs 110V, 220V Thyristor
Reverse Input Protection
OUTPUT
External sense is used when the voltage regulation
at the loa is critical. The sense can compensate
voltage drops up to 5% of nominal voltage
Output voltages
Output current
Source regulation
Load regulation
See Selection Table
See Selection Table
0.1%
Over / Under voltage alarm built in relay changes
state if converter output voltage is not with 90% to
115% of nominal output. User selects NO or NC
relay function. The relay is rated 30V 0.5A
0.2% (0 to 100% load)
<3ms. 10 to 90% load step to within 3% of
nominal output voltage
Transient recovery
This input allow remote start and shutdown of the
converter by a signal voltage of 5 to 12V. Max 35mA
Inhibit input / Power down
OPTIONAL FEATURES
Output ripple
Typ 30mV (60kHz)
Input ripple
150:1 attenuation on Output (50-400Hz)
Temperature coefficient
Output adjustment
Current limit
0.02% per °C
Use the series diode output when the output is
connected in parallel with other power supplies to
achived redundancy. The output current is derated
with 10% on 24 to 48V outputs.
95%-110% with 15 Turn potentiometer
Series Diode
105%, rectangular
Remote sense
Soft start
Yes
For environment with high non condensing humidity,
max 98% RH
Conformally coating
Inrush current
Yes
Inrush current limit with NTC, reduces the inrush
current during start up. The input votlage range will
be affected. Only available on C & D inputs.
Startup time
1 Sec
2 - 25ms
Holdup time
OPERATING
Mounting Options
STANDARDS
Safety standards
C-Tick
See Technical Illustrations
Efficiency
88%–91%
Design topology
Switching frequency
Overvoltage protection
Push-pull
IEC60950, Low Voltage Directive
AS/NZS CISPR11 Group 1, Class A
40kH
Yes, 115% of nominal voltage
EN IEC 61000-6-3, Emission
EN IEC 61000-6-2, Immunity
EN IEC 61000-4-4, 4kV
Input / Output: 24, 48, 72, 2kVdc
Input / Output: 10, 220, 2.5kVac, 4kVdc
Input / Case: 24, 48, 72, 2kVdc
Input / Case: 110, 220, 2.5kVac, 4kVdc
Output / Case: < 75Vdc output, 2kVdc
Output / Case: > 75Vdc output, 2.5kVac, 4kVdc
EMC
EN IEC 61000-4-5 level 2 & 3
Isolation
MECHANICAL
Dimensions
Weight
232 x 210 x 86mm
4.2kg
ENVIRONMENTAL
Mounting
See Technical Illustrations
-25C to +55C (100% load)
+55C to +70C (with derating
Operating Temperature
Temperature coefficient
Storage temperature
Cooling
0.02%./C
-40°C to 85°C.
Convectional cooling.
Doc. No. PU500 Rev.B 9-11-15
PU500
4 0 0 - 5 0 0 W AT T S D C / D C I N D U S T R I A L C O N V E R T E R
SELECTION TABLE
MODEL NUMBER
PU500 24/24
PU500 24/28
PU500 24/36
PU500 24/48
PU500 24/60
PU500 48/24
PU500 48/28
PU500 48/36
PU500 48/48
PU500 48/60
PU500 110/24
PU500 110/28
PU500 110/36
PU500 110/48
PU500 110/60
PU500 220/24
PU500 220/28
PU500 220/36
PU500 220/48
PU500 220/60
INPUT VOLTAGE
18-32V
OUTPUT VOLTAGE
OUTPUT CURRENT
16.7A
14.3A
11.2A
8.4A
POWER
400W
400W
400W
400W
400W
500W
500W
500W
500W
500W
500W
500W
500W
500W
500W
500W
500W
500W
500W
500W
24V
28V
36V
48V
60V
24V
28V
36V
48V
60V
24V
28V
36V
48V
60V
24V
28V
36V
48V
60V
18-32V
18-32V
18-32V
18-32V
6.7A
38-60V
20.9A
17.9A
13.9A
10.5A
8.4A
38-60V
38-60V
38-60V
38-60V
88-150V
88-150V
88-150V
88-150V
88-150V
175-300V
175-300V
175-300V
175-300V
175-300V
20.9A
17.9A
13.9A
10.5A
8.4A
20.9A
17.9A
13.9A
10.5A
8.4A
TECHNICAL ILLUSTRATIONS
Doc. No. PU500 Rev.B 9-11-15
PU500
4 0 0 - 5 0 0 W AT T S D C / D C I N D U S T R I A L C O N V E R T E R
MOUNTING OPTIONS
Doc. No. PU500 Rev.B 9-11-15
Powering Progress – www.powerbox.com.au
相关型号:
©2020 ICPDF网 联系我们和版权申明