115-PP-650-41-003101 [PREDIP]
DIL SOCKETS;
| 型号： | 115-PP-650-41-003101 |
| 厂家： | 
PRECID-DIP DURTAL SA |
| 描述： | DIL SOCKETS |
| 文件： | 总5页 (文件大小：24K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
DIL SOCKETS
115-PP-636-41-003101
2.54 mm, Solder tail, Ultralow and very low profile
SERIES
115
"Ultralow" sockets have specially designed
contacts for reduced socket above PCB.
TECHNICAL SPECS.:
Insulator
Black glass filled polyester PCT-GF30-FR
Flammability
Sleeve
UL 94V-O
Brass CuZn36Pb3 (C36000)
Contact
Clip (4 finger): Beryllium copper (C17200)
Accepted pin Ø
Insertion force
Withdrawal force
Mechanical life
Rated current
Contact resistance
Dielectric strength
0.40 to 0.52 mm
3 N typ.
1.5 N typ. (polished steel gauge Ø 0.43 mm)
Min. 100 cycles
1 A
Max. 10 m
Min. 1000 V RMS
ORDERING INFORMATION:
PP Plating code
Sleeve
Tin
Clip
87
83
Gold flash
Gold 0.75 µm
Tin
ADVANCED INFORMATION:
Order Codes
Poles
6
A
B
C
D
E
See
115-PP-306-41-003101
115-PP-308-41-003101
115-PP-310-41-003101
115-PP-314-41-003101
7.6
7.62
7.62
7.62
7.62
10.1
10.1
10.1
10.1
8
10.1
12.6
17.7
10
14
PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland
PHONE +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com
115-PP-316-41-003101
115-PP-318-41-003101
115-PP-320-41-003101
115-PP-322-41-003101
115-PP-324-41-003101
115-PP-328-41-003101
115-PP-420-41-003101
115-PP-422-41-003101
115-PP-424-41-003101
115-PP-428-41-003101
115-PP-624-41-003101
115-PP-628-41-003101
115-PP-632-41-003101
115-PP-636-41-003101
115-PP-640-41-003101
115-PP-648-41-003101
115-PP-650-41-003101
16
18
20
22
24
28
20
22
24
28
24
28
32
36
40
48
50
20.3
22.8
25.3
27.9
30.4
35.5
25.4
27.8
30.4
35.5
30.5
35.5
40.6
45.7
50.8
60.9
63.5
7.62
10.1
10.1
10.1
10.1
10.1
10.1
12.6
12.6
12.6
12.6
17.7
17.7
17.7
17.7
17.7
17.7
17.7
7.62
7.62
7.62
7.62
7.62
10.16
10.16
10.16
10.16
15.24
15.24
15.24
15.24
15.24
15.24
15.24
PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland
PHONE +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com
TECHNICAL ASSISTANCE
GENERAL SPECIFICATIONS:
The values listed below are general specs applying for PRECI-DIP DIL sockets. Please see individual catalog page for additional
and product specific technical data.
Operating temperature range
Climatic category (IEC)
Operating humidity range
Max working voltage
-55 ... +125 °C
55/125/21
annual mean 75 %
100 VRMS/150 VDC
PRECI-DIP sockets are recognized by Underwriters Laboratories Inc. and listed under "Connectors for Use in Data, Signal,
Control and Power Applications", File Nr. E174442.
MECHANICAL CHARACTERISTICS:
Clip retention
Min. 40 N (no displacement under axial force applied)
Min. 3.3 N acc. to MIL-DTL-83734, pt 4.6.4.2
Contact (sleeve / clip) retention
ELECTRICAL CHARACTERISTICS:
Insulation resistance between any two adjacent contacts
Capacitance between any two adjacent contacts
Min. 10'000 M at 500 V AC
Max. 1 pF
Air and creepage distances between any two adjacent contacts Min. 0.6 mm (Min. 0.2 mm FOR SHRINK-DIP SOCKETS)
ENVIRONMENTAL CHARACTERISTICS:
The sockets withstand the following environmental tests without mechanical and electrical defects:
- Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16h
- Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH, 1 cycle of 24 h
- Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h
- Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min
- Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g, 1 octave/min, 10 cycles for each axis
- Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis
During the above two tests no contact interruption >50 ns does appear.
- Solderability J-STD-002A, Test A, 245°C, 5 s solder alloy SnAg3.8Cu0.7
- Resistance to soldering heat J-STD-0020C, 260°C, 20 s
- Moisture sensitivity J-STD-020C level 1
- Resistance to corrosion :
1) Salt spray test IEC 60068-2-11.Ka: 48 h
2) Sulfur dioxide (SO2) test IEC 60068-2-42 Kc: 96 h at 25 ppm SO2, 25 °C, 75 %rH
3) Hydrogen sulfide (H2S) test IEC 60068-2-43 Kd: 96 h at 12 ppm H2S, 25 °C, 75 %rH
SOLDERLESS COMPLIANT PRESS-FIT CHARACTERISTICS:
PRESS-FIT CHARACTERISTICS MEASURED ACC. TO IEC 60352-5
- Press-in force: 90 N max. (at min. hole dia.) / 65 N typ.
- Push-out force: 30 N min. (at max. hole dia.) / 50 N typ.
- Push-out 3rd cycle: 20 N min. (at max. hole dia.)
PCB HOLE DIMENSIONS
- 2.54 mm grid: Finished hole Ø: 1 + 0.09/-0.06 mm | Drilled hole Ø: 1.15 ± 0.02 mm
PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland
PHONE +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com
PCB HOLE PLATING
- PCB surface finish: Hole plating
- Tin: 5-15 µm tin over min. 25 µm copper
- Copper: min. 25 µm copper
- Gold over nickel: 0.05-0.2 µm gold over 2.5-5 µm nickel over min. 25 µm copper
PRECI-DIP SA Rue Saint-Henri 11 P.P.Box 834 CH-2800 Delémont / Switzerland
PHONE +41 (0)32 421 04 00 FAX +41 (0)32 421 04 01 E-MAIL sales@precidip.com www.precidip.com
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Preci-dip:
115-87-636-41-003101
相关型号：
115.1%FA10A20PPM-CARDPACK
Fixed Resistor, Wire Wound, 10W, 115ohm, 632V, 0.1% +/-Tol, -20,20ppm/Cel,
VISHAY
115.1%FA3/420PPM-CARDPACK
Fixed Resistor, Wire Wound, 0.75W, 115ohm, 32V, 0.1% +/-Tol, -20,20ppm/Cel,
VISHAY
115.25%FA10A20PPM-CARDPACK
Fixed Resistor, Wire Wound, 10W, 115ohm, 632V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
115.25%FA10A20PPM-TANDR
Fixed Resistor, Wire Wound, 10W, 115ohm, 632V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
115.25%FA3/420PPM-AMMOPACK
Fixed Resistor, Wire Wound, 0.75W, 115ohm, 32V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
115.25%FA3A20PPM-TANDR
Fixed Resistor, Wire Wound, 3W, 115ohm, 130V, 0.25% +/-Tol, -20,20ppm/Cel,
VISHAY
115.5%FA3/420PPM-AMMOPACK
Fixed Resistor, Wire Wound, 0.75W, 115ohm, 32V, 0.5% +/-Tol, -20,20ppm/Cel,
VISHAY
©2020 ICPDF网 联系我们和版权申明