KA-150 [PROTEC]
Trans Voltage Suppressor Diode, 150V V(RWM), Bidirectional, 1 Element, Silicon,;型号: | KA-150 |
厂家: | PROTEK DEVICES |
描述: | Trans Voltage Suppressor Diode, 150V V(RWM), Bidirectional, 1 Element, Silicon, 局域网 二极管 |
文件: | 总6页 (文件大小:453K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
K SERIES
Only One Name Means ProTek’Tion™
HIGH POWERED TVS COMPONENT
Bidirecꢀonal
APPLICATIONS
• DC & AC Applicaꢀons
• Remote Transmission Lines
• Industrial Wiring
AXIAL LEAD
FEATURES
• UL File Recogniꢀon #E208219
• Axial Lead Terminals
• High Current Capability
• Excellent Clamping Voltage
• Glass Passivated Juncꢀon
• Bidirecꢀonal Configuraꢀon
• Low Slope Resistance
• Repeꢀꢀon Rate (Duty Cycle): 0.01%
• Hazardous Substance Free
• RoHS Complaint (Exempꢀon #7)
MECHANICAL CHARACTERISTICS
• Epoxy Encapsulated Axial Lead Device
• Approximate Weight: 3.35 grams
• High Temperature Soldering: 260°C / 10 seconds at Terminals
• Flammability Raꢀng UL 94V-0
• Marking: Part Number
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
°C
Operaꢀng Temperature
TJ
TSTG
IPP
-55 to 150
Storage Temperature
-55 to 150
°C
KA Series - Current Raꢀng, Rated IPP @ 8/20µs
KB Series - Current Raꢀng, Rated IPP @ 8/20µs
KC Series - Current Raꢀng, Rated IPP @ 8/20µs
K1 Series - Current Raꢀng, Rated IPP @ 8/20µs
KD Series - Current Raꢀng, Rated IPP @ 8/20µs
3
6
kA
IPP
kA
IPP
10
1
kA
IPP
kA
IPP
15
kA
www.protekdevices.com
05459.R5 6/16
Page 1
K SERIES
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
(Note 1)
REVERSE
STAND-OFF
VOLTAGE
MINIMUM
BREAKDOWN
VOLTAGE
TEST
CURRENT
CURRENT
RATING
MAXIMUM
CLAMPING
VOLTAGE
REVERSE
LEAKAGE
CURRENT
ꢁ IPP
VC
VOLTS
ꢁVDC
IR
µA
V(BR) ꢁ IT
VOLTS
ꢁ IT
mA
8/20µs
kA
VAC
VDC
VOLTS VOLTS
K1-076
KA-058*
KA-076*
KA-150
54.0
40.0
76.0
58.0
83.0
64.0
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
1
3
135.0
110.0
140.0
230.0
520.0
652.0
110.0
135.0
260.0
290.0
340.0
520.0
625.0
110.0
135.0
260.0
290.0
330.0
340.0
370.0
520.0
625.0
110.0
145.0
20
20
20
10
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
54.0
76.0
85.0
3
106.0
275.0
310.0
40.0
150.0
380.0
430.0
58.0
158.0
401.0
440.0
64.0
3
KA-380*
KA-430*
KB-058*
KB-076*
KB-170*
KB-190*
KB-240*
KB-380*
KB-430*
KC-058
3
3
6
54.0
76.0
83.0
6
130.0
145.0
180.0
275.0
310.0
40.0
170.0
190.0
240.0
380.0
430.0
58.0
180.0
200.0
250.0
401.0
440.0
64.0
6
6
6
6
6
10
10
10
10
10
10
10
10
10
15
15
KC-076*
KC-170
54.0
76.0
83.0
130.0
145.0
150.0
180.0
188.0
275.0
310.0
40.0
170.0
190.0
200.0
240.0
250.0
380.0
430.0
58.0
180.0
200.0
222.0
250.0
261.0
401.0
440.0
64.0
KC-190*
KC-200*
KC-240
KC-250
KC-380*
KC-430*
KD-058
KD-076
54.0
76.0
85.0
NOTE
1. *Contact factory for minimum order quanꢀꢀes.
www.protekdevices.com
05459.R5 6/16
Page 2
K SERIES
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
TABLE 1 - STANDARD PACKAGE , LEADED PROCESS, PACKAGE PEAK REFLOW TEMPERATURE
Package Thickness
Volume mm3 < 350
Volume mm3 >= 350
< 2.5mm
240 +0/-5°C
225 +0/-5°C
>= 2.5mm
225 +0/-5°C
225 +0/-5°C
NOTES:
1. The package thickness and volume dictates the maximum component temperature. The thermal gradients between packages can be reduced by using convecꢀon reflow processes.
2. Volume of the package does not account for the external terminals.
3. Package volume is the equivalent of package size mulꢀpled by the height.
TABLE 2 - LEAD-FREE PROCESS, PACKAGE PEAK REFLOW TEMPERATURE
Package Thickness
< 1.6mm
Volume mm3 < 350
Volume mm3 250 - 2000
Volume mm3 > 2000
260 +0°C
260 +0°C
260 +0°C
1.6mm - 2.5mm
>= 2.5mm
260 +0°C
250 +0°C
245 +0°C
250 +0°C
245 +0°C
245 +0°C
NOTES:
1. The profiling tolerance is +0, -X °C but at no ꢀme will it exceed -5°C.
2. Volume of the package does not account for the external terminals.
3. The package thickness and volume dictates the maximum component temperature. The thermal gradients between packages can be reduced by using convecꢀon reflow processes.
4. Components used in lead-free assembly shall be evaluated using the lead-free classificaꢀon temperature and profiles as defined in the above table.
5. Table 3 will help determine if the components are lead-free or not.
6. The device manufacturer/supplier shall ensure process compaꢀbility up to and including the stated classificaꢀon temperature at the rated MSL level.
TABLE 3 - CLASSIFICATION REFLOW PROFILES
Profile Feature
Sn ꢂ Pb Eutetecꢀc Assembly
PbꢂFree Assembly
Average Ramp Up Rate (TSMAX to TP)
3°C/seconds Max.
3°C/seconds Max.
Preheat
Temperature Min TSMIN
Temperature MAX TSMAX
Time (TSMIN to TSMAX) (ts)
100°C
150°C
60-120 seonds
150°C
200°C
60-180 seconds
Time Maintained Above
Temperature (TL)
Time(tL)
183°C
60-150 seconds
217°C
60-150 seconds
Peak/Classificaꢀon Temperature (TP)
Time Within 5°C of Actual Temperature (tP)
Ramp-Down Rate
See Table 1
See Table 2
10-30 seconds
6°C/seconds Max.
6 Minutes Max.
20-40 seconds
6°C/seconds Max.
8 Minutes Max.
Time 25°C to Peak Temperature
NOTES:
1. All temperatures refer to topside of the package, measured on the package body surface.
2. Time within 5°C of the actual peak temperature (TP) specified for the reflow profiles is “supplier” minimum and “user” maximum.
www.protekdevices.com
05459.R5 6/16
Page 3
K SERIES
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 1
SOLDER WAVEFORM
Tp
Tp
TL
Criꢀcal Zone
TL to Tp
Ramp-Up
tL
Tsmax
Tsmin
ts Preheat
Ramp-Down
t 25°C to Peak
Time
FIGURE 2
POWER DERATING CURVE
100
80
Peak Pulse Power
10/1000µs
60
40
20
0
0
25
50
75
100
125
150
TA - Ambient Temperature - °C
www.protekdevices.com
05459.R5 6/16
Page 4
K SERIES
Only One Name Means ProTek’Tion™
AXIAL LEAD PACKAGE INFORMATION
OUTLINE DIMENSIONS
MILLIMETERS
INCHES
MAX
DIM
MIN
MAX
MIN
A
B
C
D
E
-
-
14.5
12.7
1.32
7.0
-
-
0.57
0.50
0.052
0.28
0.98
0.10
1.28
5.0
23.45
-
0.050
0.20
0.92
-
24.85
2.5
F
E
B
A
F
D
C
www.protekdevices.com
05459.R5 6/16
Page 5
K SERIES
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage pro-
tecꢀon and overcurrent protecꢀon components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protecꢀon in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostaꢀc discharge (ESD); nuclear electromagneꢀc pulses (NEMP); inducꢀve switching; and electro-
magneꢀc interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers high performance interface and linear products. They
include analog switches; mulꢀplexers; LED drivers; LED wafer die for ESD protecꢀon; audio control ICs; RF and related high frequency products.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Markeꢀng: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By Eꢂmail:
Asia Sales: asiasales@protekdevices.com
Europe Sales: europesales@protekdevices.com
U.S. Sales: ussales@protekdevices.com
Distributor Sales: distysales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
ProTek Devices ꢃAsia Pacificꢄ Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2014 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,
consequenꢀal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.
www.protekdevices.com
05459.R5 6/16
Page 6
©2020 ICPDF网 联系我们和版权申明