PLCDA05C-6-LF-T7 [PROTEC]
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 12 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8;
| 型号： | PLCDA05C-6-LF-T7 |
| 厂家： | 
PROTEK DEVICES |
| 描述： | Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 12 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8 局域网 光电二极管 |
| 文件： | 总9页 (文件大小：917K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
500 WATT MULTIꢀLINE LOW CAPACITANCE TVS ARRAY
DESCRIPTION
The PLCDAxxC-6 Series are low capacitance mulꢀ-line transient voltage suppressor arrays that provides board level
protecꢀon for standard TTL and CMOS bus line applicaꢀons against the damaging effects of ESD, terꢀary lightning and
switching transients.
The PLCDAxxC-6 Series has a peak pulse power raꢀng of 500 Waꢁs for an 8/20µs waveshape. This device series meets
the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SOꢀ8 PACꢁAGE
FEATURES
APPLICATIONS
• Computer Interface Protecꢀon
• Ethernet - 10/100/1000 Base T
• Bluetooth & RF
• Compaꢀble with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compaꢀble with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compaꢀble with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line-
Gnd) & Level 3(Line-Line)
• 500 Waꢁs Peak Pulse Power per Line (tp = 8/20µs)
• Bidirecꢀonal Configuraꢀon
• Available in Mulꢀple Voltages Ranging from 3V to 15V
• Protects Up to Six Lines
• Low Capacitance: 8pF
• RoHS Compliant
• REACH Compliant
MEChANICAL ChARACTERISTICS
• Molded JEDEC SO-8 Package
• Approximate Weight: 70 milligrams
• Lead-Free Pure-Tin Plaꢀng (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 12mm Tape and Reel Per EIA Standard 481
• Flammability Raꢀng UL 94V-0
PIN CONFIGURATION
I/O
8
I/O
7
I/O
6
GND
5
1
I/O
2
I/O
3
I/O
4
GND
www.protekdevices.com
05102.R9 9/12
Page 1
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otꢂerwise Specified
PARAMETER
SYMBOL
VALUE
-55 to 150
-55 to 150
500
UNITS
°C
Operaꢀng Temperature
Storage Temperature
TL
TSTG
PPP
°C
Peak Pulse Power (tp = 8/20µs) - See Figure 1
Waꢁs
ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless Otꢂerwise Specified
PART
NUMBER
DEVICE
MARꢁING
RATED
STANDꢀOFF
VOLTAGE
MINIMUM
BREAꢁDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
ꢄFig. 2ꢅ
MAXIMUM
LEAꢁAGE
CURRENT
MAXIMUM
CAPACITANCE
(Note 1)
ꢃ1mA
V(BR)
VOLTS
ꢃIP = 1A
VC
VOLTS
ꢃVWM
ID
µA
ꢃ0V, 1Mhz
VWM
VOLTS
C
pF
PLCDA03C-6
PLCDA05C-6
PLCDA08C-6
PLCDA12C-6
PLCDA15C-6
PRS
PRT
3.3
5.0
4.5
6.0
7.0
9.8
125
20
10
2
8
8
8
8
8
PRW
PRV
PRU
8.0
8.5
13.4
19.0
24.0
12.0
15.0
13.3
16.7
2
NOTES
1. Capacitance between I/O pins and ground (pins 4 and 5) is typically 8pF. Capacitance between I/O pins is typically 4pF.
FIGURE 1
PEAꢁ PULSE POWER VS PULSE TIME
10,000
1,000
500W, 8/20µs Waveform
100
10
0.1
1
10
100
1,000
10,000
td - Pulse Duraꢆon - µs
www.protekdevices.com
05102.R9 9/12
Page 2
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
FIGURE 2
PULSE WAVE FORM
FIGURE 3
POWER DERATING CURVE
120
100
TEST
Peak Pulse Power
8/20µs
tf
Peak Value IPP
WAVEFORM
PARAMETERS
tf = 8µs
100
80
80
60
td = 20µs
e-t
60
40
20
0
40
td = t/(IPP/2)
20
0
Average Power
0
5
10
15
20
25
30
0
25
50
75 100 125
150
t - Time - µs
TA - Ambient Temperature - °C
FIGURE 4
TYPCIAL CLAMPING VOLTAGE VS PEAꢁ PULSE CURRENT FOR PLCDA05Cꢀ6
16
12
8
4
0
0
2
4
6
8
10
12
14
16
18
I
PP - Peak Pulse Current - Amps
www.protekdevices.com
05102.R9 9/12
Page 3
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
FIGURE 5
OVERShOOT & CLAMPING VOLTAGE FOR PLCDA05Cꢀ6
40
30
20
10
0
ESD Test Pulse - 25 kilovolt, 1/30ns ꢄWavesꢂapeꢅ
FIGURE 6
FIGURE 7
INSERTION LOSS ꢀ PLCDA05Cꢀ6
RETURN LOSS ꢀ PLCDA05Cꢀ6
50
50
20
0
20
0
-20
-20
-50
-50
100 Mhz per Division
100 Mhz per Division
www.protekdevices.com
05102.R9 9/12
Page 4
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
SPICE MODEL
FIGURE 1
SPICE MODEL
I/O
ABD
LCRD
ABD
LCRD
Lg
0.6nH
ABD - Avalanche Breakdown Diode (TVS)
LCRD: Low Capacitance Recꢀfier Diode
Lg - Lead Inductance
TABLE 1 ꢀ SPICE PARAMETERS
PARAMETER
UNIT
ABD(TVS)
See Table 2
1
LCRD
BV
IBV
Cjo
IS
V
200
0.01
5
µA
pF
See Table 2
See Table 2
0.6
A
1E-13
0.6
Vj
V
M
N
-
0.33
0.33
1
-
Ohms
s
1
RS
See Table 2
1E-8
0.31
1E-9
1.11
TT
EG
eV
1.11
TABLE 2 ꢀ ABD SPECIFIC SPICE PARAMETERS
PART NUMBER
PLCDA03
BV(VOLTS)
IS (AMPS)
Cjo(pF)
438
Rs(OhMS)
0.21
4.5
6.0
1E-11
1E-11
1E-13
PLCDA05
284
0.14
PLCDA15
16.7
102
0.52
www.protekdevices.com
05102.R9 9/12
Page 5
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
APPLICATION INFORMATION
Line 6
Line 5
Line 4
Line 3
Line 2
Line 1
8
7
6
5
1
2
3
4
FIGURE 1 ꢀ BIDIRECTIONAL COMMONꢀMODE PROTECTION FOR A TRANSCEIVER
Circuit connecꢀvity is as follows:
• Line 1 connected to Pin 1.
• Line 2 connected to Pin 2.
• Line 3 connected to Pin 3.
• Line 4 connected to Pin 8.
• Line 5 connected to Pin 7.
• Line 6 connected to Pin 6.
• Pins 4 and 5 connected to ground.
CIRCUIT BOARD RECOMMENDATIONS
Circuit board layout is criꢀcal for electromagneꢀc compaꢀbility protecꢀon. The following guidelines are recommended:
• The protecꢀon device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
• The path length between the TVS device and the protected line should be minimized.
• All conducꢀve loops including power and ground loops should be minimized.
• The transient current return path to ground should be kept as short as possible to reduce parasiꢀc inductance.
• Ground planes should be used whenever possible. For mulꢀlayer PCBs, use ground vias.
www.protekdevices.com
05102.R9 9/12
Page 6
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
SOꢀ8 PACꢁAGE INFORMATION
-A-
OUTLINE DIMENSIONS
MILLIMETERS
INChES
DIM
MIN
MAX
5.00
4.00
1.75
0.49
1.25
MIN
0.189
0.150
0.054
0.014
0.016
MAX
0.196
0.157
0.068
0.019
0.049
8
1
5
4
A
4.80
3.80
1.35
0.35
0.40
B
M
0.010” (0.25mm)
M
+
4 PL
P
-B-
B
C
D
F
G
D
R x 45°
C
G
1.27 BSC
0.05 BSC
0° - 10°
J
0.18
0.10
5.80
0.25
0.25
0.25
6.20
0.50
0.007
0.004
0.229
0.010
0.009
0.008
0.244
0.019
-T-
K
K
B
J
F
P
0.010” (0.25mm)
T
A
S S
+
8 PL
M
R
NOTES
1. -T- = Seaꢀng plane and datum surface.
2. Dimensions “A” and “B” are datum.
3. Dimensions “A” and “B” do not include mold protrusion.
4. Maximum mold protrusion is 0.015” (0.380mm) per side.
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.
6. Dimensions are exclusive of mold flash and metal burrs.
A
PAD LAYOUT DIMENSIONS
B
MILLIMETERS
INChES
DIM
MIN
MAX
1.40
0.89
-
MIN
0.045
0.025
0.245
0.155
0.040
MAX
0.055
0.035
-
A
1.14
0.64
6.22
3.94
1.02
B
D
E
C
C
D
4.17
1.27
0.165
0.050
E
NOTES
1. Controlling dimension: inches.
www.protekdevices.com
05102.R9 9/12
Page 7
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
TAPE AND REEL
10 Pitches Cumulaꢀve
Tolerance on tape ± 0.2
P2
P0
D
t
E
F
W
K0
B0
A0
P
User Direcꢀon of Feed
SPECIFICATIONS
TAPE
REEL DIA.
A0
B0
ꢁ0
D
E
F
W
P0
P2
P
tmax
WIDTh
178mm (7”)
12mm 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25
NOTES
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape.
4. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape.
5. Bulk product shipped in tubes of 98 pieces per tube.
6. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package.
Package outline, pad layout and tape specificaꢀons per document number 06009.R3 9/10.
ORDERING INFORMATION
BASE PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
(xx = Voltage)
PLCDAxxC-6
-LF
-LF
-T7
1,000
2,500
7”
98
98
PLCDAxxC-6
-T13
13”
This device is only available in a Lead-Free configuraꢀon.
www.protekdevices.com
05102.R9 9/12
Page 8
PLCDA03C-6 - PLCDA15C-6
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that offers a product line of tran-
sient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the effects of lightning, electrostaꢀc discharge (ESD), nuclear electromagneꢀc pulses
(NEMP), inducꢀve switching and EMI / RFI. ProTek Devices also offers high performance interface and linear products that include analog
switches; mulꢀplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of con-
sumer; industrial; automoꢀve and other applicaꢀons.
CONTACT US
Corporate headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telepꢂone
General: 602-431-8101
Sales: & Markeꢀng: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By E-mail:
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
ProTek Devices ꢄAsia Pacificꢅ Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,
consequenꢀal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.
www.protekdevices.com
05102.R9 9/12
Page 9
相关型号：
PLCDA05C-6-T13
Trans Voltage Suppressor Diode, 500W, 5V V(RWM), Bidirectional, 12 Element, Silicon, PLASTIC, SOP-8
PROTEC
PLCDA08-LF
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
PLCDA08-LF-T13
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
PLCDA08-LF-T7
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
PLCDA08-T13
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 4 Element, Silicon, PLASTIC, SOP-8
PROTEC
PLCDA08-T7
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 4 Element, Silicon, PLASTIC, SOP-8
PROTEC
PLCDA08C-6-LF
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 12 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
PLCDA08C-6-LF-T7
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 12 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC
PLCDA08C-6-T13
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 12 Element, Silicon, PLASTIC, SOP-8
PROTEC
PLCDA08C-6-T7
Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 12 Element, Silicon, PLASTIC, SOP-8
PROTEC
©2020 ICPDF网 联系我们和版权申明