PP0080SC-LF [PROTEC]
Surge Protection Circuit,;型号: | PP0080SC-LF |
厂家: | PROTEK DEVICES |
描述: | Surge Protection Circuit, 电信 电信集成电路 |
文件: | 总10页 (文件大小:553K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PP-SM Series
Only One Name Means ProTek’Tion™
THYRISTOR SURGE SUPPRESSOR
DESCRIPTION
The PP-SM Series are thyristor surge suppression (TSS) devices designed to protect telecommunicaꢀon equipment
against lightning and transients induced by AC power lines. These devices can be used on central office equipment,
PBX, DSU, OCU and other telecommunicaꢀon equiment/systems. The bidirecꢀonal configuraꢀon provides protecꢀon
for both posiꢀve and negaꢀve transients and the discrete surface mount package allows for individual placement of
the device on line cards or other locaꢀons where mulꢀple component devices do not offer the versaꢀle in board trace
layout.
This series can be used to provide protecꢀon in accordance with industry standards such as FCC Part 68, ANSI C62.41,
UL 1459, GR-1089-CORE, IEC 61000-2, IEC 61000-4 and IEC 61000-4-5 requirements.
DO-214AA PACKAGE
FEATURES
APPLICATIONS
• T1/E1 Trunk & Line Cards
• SLIC Line Card
• DBX Branch Exchange Switches
• FCC Part 68 Customer Premise Equipment
• Line Interface Modem
• Compaꢀble with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
• Compaꢀble with IEC 61000-4-4 (EFT): 40A, 5/50ns
• Compaꢀble with IEC 61000-4-5 (Surge): 95A, 8/20µs - L4(Line-
Ground), 48A - L4(Line-Line) & 83A - L2(Power)
• FCC Part 68, UL 1459, Bellcore 1089 & ITU-K.20/K.21 Compliant
• UL File Recogniꢀon #E208219
• xDSL Architecture Interface
• Peak Off-State Voltage from 25 to 300 Volts
• Surge Current Capability (See Table 1)
• ESD Protecꢀon > 25 kilovolts
• Low Capacitance for T1/E1 Trunk & Line Card Applicaꢀons
• Bidirecꢀonal Configuraꢀon
• RoHS Compliant
• REACH Compliant
MECHANICAL CHARACTERISTICS
DEVICE SYMBOL
BIDIRECTIONAL
• Molded Plasꢀc DO-214AA Package
• Approximate Weight: 0.095 grams
• Lead-Free Pure-Tin Plaꢀng (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• Flammability Raꢀng UL 94V-0
• 12mm Tape and Reel per EIA Standard 481
TABLE 1 - SURGE RATINGS
SERIES
IPP
2/10µs
AMPS
IPP
8/20µs
AMPS
IPP
IPP
IPP
ITSM
60Hz
AMPS
di/dt
A/µs
(Note 1)
dv/dt
V/µs
(Note 1)
10/160µs
AMPS
10/560µs
AMPS
10/1000µs
AMPS
SA
SB
SC
150
300
500
150
300
400
100
150
200
50
50
80
20
32
60
500
500
500
2000
2000
2000
100
200
100
NOTES
1. Criꢀcal rate of rise for On-State Current (di/dt) and Off-State Voltage (dv/dt).
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 1
PP-SM Series
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otherwise Specified
PARAMETER
SYMBOL
VALUE
UNITS
Amps
°C
Surge Current - 50/60Hz (SC Series)
Juncꢀon Temperature
ITSM
60
-40 to 150
-55 to 150
28
TA
Storage Temperature
TSTG
°C
Thermal Resistance (Juncꢀon) - SA & SB Series
Thermal Resistance (Juncꢀon) - SC Series
Thermal Resistance (Ambient) - SA & SB Series
Thermal Resistance (Ambient) - SC Series
RQJC
°C/Waꢁ
°C/Waꢁ
°C/Waꢁ
°C/Waꢁ
RQJC
26
RQJA
90
RQJA
85
FIGURE 1
PULSE WAVEFORM
FIGURE 2
VI CHARACTERISITC CURVE
tf
IPP
TEST
WAVEFORM
PARAMETERS
tf = 10µs
ITSM
100
IT
IS
td = 1000µs
Peak Value IPP
IH
VS
td = t/(IPP/2)
IDRM
50
VT
VDRM
e-t
0
0
1
2
3
t - Time - ms
FIGURE 3
ON-STATE CURRENT VS SURGE CURRENT DURATION
100
PPxxxxSA
PPxxxxSC
PPxxxxSB
10
1
1
10
100
Surge Current Duraꢀon ꢁ Full Cycles
1000
Supply Frequency ꢁ 60 Hz Sinusoidal
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 2
PP-SM Series
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
DEVICE
MARKING
REPETITIVE SWITCHING MINIMUM SWITCHING MAXIMUM MAXIMUM ON-STATE
TYPICAL
CURRENT CAPACITANCE
(Note 1)
PEAK
OFF-STATE
VOLTAGE
VOLTAGE
HOLDING
CURRENT
(Fig. 7)
CURRENT
OFF-STATE
CURRENT
(Fig. 4ꢃ
ꢂVDRM
IDRM
ON-STATE
VOLTAGE
(Fig. 5)
ꢂIT
ꢂ100V/µs di/dt = 1A/ms
ꢂ2V, 1MHz
VDRM
VS
IH
IS
VT
IT
C
VOLTS
VOLTS
mA
mA
µA
VOLTS
AMPS
pF
PP0080SA
PP0300SA
PP0640SA
PP0720SA
PP0800SA
PP1100SA
PP1300SA
PP1500SA
PP1800SA
PP2300SA
PP2600SA
PP3100SA
PP3500SA
PP0080SB
PP0300SB
PP0640SB
PP0720SB
PP0800SB
PP1100SB
PP1300SB
PP1500SB
PP1800SB
PP2300SB
PP2600SB
PP3100SB
PP3500SB
PP0080SC
PP0300SC
PP0640SC
PP0720SC
PP0800SC
PP1100SC
PP1300SC
NOTES
GA
GB
GC
GD
GE
GF
GG
GH
GI
6
25
40
50
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
800
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
2.2
50
60
60
60
60
60
40
40
40
30
30
30
30
60
110
60
60
60
60
40
40
40
30
30
30
30
75
60
120
120
120
120
80
25
50
58
77
150
150
150
150
150
150
150
150
150
150
150
50
65
88
75
98
90
130
160
180
220
260
300
350
400
25
120
140
160
190
220
275
300
6
GJ
GK
GL
GM
FA
GN
GP
GQ
GR
GS
GT
GU
GV
GW
GX
GY
GZ
HA
HB
HC
HD
HE
HF
HG
25
40
50
58
77
150
150
150
150
150
150
150
150
150
150
150
50
65
88
75
98
90
130
160
180
220
260
300
350
400
25
120
140
160
190
220
275
300
6
25
40
50
58
77
150
150
150
150
150
65
88
75
98
90
130
160
120
1. Capacitance imblance between posiꢀve and negaꢀve polariꢀes is typically < 15pF.
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 3
PP-SM Series
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified
PART
NUMBER
DEVICE
MARKING
REPETITIVE SWITCHING MINIMUM SWITCHING MAXIMUM MAXIMUM ON-STATE
TYPICAL
CURRENT CAPACITANCE
(Note 1)
PEAK
OFF-STATE
VOLTAGE
VOLTAGE
HOLDING
CURRENT
(Fig. 7)
CURRENT
OFF-STATE
CURRENT
(Fig. 4ꢃ
ꢂVDRM
IDRM
ON-STATE
VOLTAGE
(Fig. 5)
ꢂIT
ꢂ100V/µs di/dt = 1A/ms
ꢂ2V, 1MHz
VDRM
VS
IH
IS
VT
IT
C
VOLTS
VOLTS
mA
mA
µA
VOLTS
AMPS
pF
PP1500SC
PP1800SC
PP2300SC
PP2600SC
PP3100SC
PP3500SC
NOTES
HH
HI
140
160
190
220
275
300
180
220
260
300
350
400
150
150
150
150
150
150
800
800
800
800
800
800
5
5
5
5
5
5
4
4
4
4
4
4
2.2
2.2
2.2
2.2
2.2
2.2
80
80
60
60
60
60
HJ
HK
HL
HN
1. Capacitance imblance between posiꢀve and negaꢀve polariꢀes is typically < 15pF.
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 4
PP-SM Series
Only One Name Means ProTek’Tion™
TYPICAL DEVICE CHARACTERISTICS
FIGURE 4
TYPICAL PEAK OFF-STATE CURRENT
FIGURE 5
TYPICAL PEAK ON-STATE CURRENT
VS ON-STATE VOLTAGE
VS JUNCTION TEMPERATURE
10
100
1
10
0.1
0.01
1
ꢁ40
0
40
80
120
0
1
2
3
4
5
6
7
tA - Temperature - °C
VT - On-State Voltage - V
FIGURE 6
FIGURE 7
TYPICAL NORMALIZED SWITCHING VOLTAGE
TYPICAL NORMALIZED HOLDING CURRENT
VS JUNCTION TEMPERATURE
VS JUNCTION TEMPERATURE
1.10
1
2
1
0
0.9
0.8
ꢁ40
0
40
80
120
ꢁ40
0
40
80
120
tA - Temperature - °C
tA - Temperature - °C
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 5
PP-SM Series
Only One Name Means ProTek’Tion™
APPLICATION INFORMATION
FIGURE 1 - UL 1459 & FCC PART 68 METALLIC PROTECTION
The TSS (Thyristor Surge Suppressor) device is located across the ꢀp-to-ring aꢂer a limiꢀng resistor and fuse combinaꢀon. RTIP and RRING resistors are opꢀonal de-
pending upon the TSS device selecꢀon. Without the resistors, the PP3100SB/SC is recommended. However, with a resistance value of 7.5 Ohms for ꢀp and ring, the
PP3100SA is recommended. Digital signals may use a lower TSS device depending upon the total ꢀp to ring voltage range. Selecꢀon of the TSS device, either PPxxxx-
SA or SB/SC is based upon the value of the ꢀp and ring resistors. For the Naꢀonal Electric Code (NEC) arꢀcle 800, it is recommended that at least one fuse be used in
the ꢀp or ring line for metallic surges. Fuses may be replaced with a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device.
RTip
Fuse
TIP
To Protected
Equipment
RING
RRing
FIGURE 2 - UL 1459 & FCC PART 68 LONGITUDINAL PROTECTION
There are two TSS devices, one located from ꢀp-to-ground and one ring-to-ground. For standard analog signals, the PP3100SA is recommended with a typical resistor
value for ꢀp and ring of 15 Ohms. The PP3100SB/SC is recommended for resistor values of 7.5 Ohms each. The Naꢀonal Electric Code (NEC) arꢀcle 800 requires two
fuse elements when connecꢀng to ground. Fuses or a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device may be used. The
purpose of this circuit is to limit AC power current from geꢃng on the ground line causing any safety hazard.
RTip
TIP
To Protected
Equipment
RING
RRing
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 6
PP-SM Series
Only One Name Means ProTek’Tion™
APPLICATION INFORMATION
FIGURE 3 - UL 1459 & FCC PART 68 METALLIC & LONGITUDINAL PROTECTION
Three equal TSS devices are used in this applicaꢀon for metallic (ꢀp-to-ring) and longitudinal (ꢀp-to-ground and ring-to-ground) protecꢀon. For analog signals, the
PP3100SB/SC is recommended. With a resistance value of 15 Ohms for the ꢀp and ring resistors, the PP3100SA may be used. The Naꢀonal Electric Code (NEC) arꢀcle
800 requires two fuse elements when connecꢀng to ground. Fuses or a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device
may be used. This circuit is recommended for protecꢀon against the Bellcore requirement: First Level Lightning Surge Tests (Telecommunicaꢀons Port), document #
GR-1089-CORE.
RTip
TIP
To Protected
Equipment
RING
RRing
CIRCUIT BOARD RECOMMENDATIONS
Circuit board layout is criꢀcal for electromagneꢀc compaꢀbility protecꢀon. The following guidelines are recommended:
• The protecꢀon device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
• The path length between the TVS device and the protected line should be minimized.
• All conducꢀve loops including power and ground loops should be minimized.
• The transient current return path to ground should be kept as short as possible to reduce parasiꢀc inductance.
• Ground planes should be used whenever possible. For mulꢀlayer PCBs, use ground vias.
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 7
PP-SM Series
Only One Name Means ProTek’Tion™
DO-214AA PACKAGE INFORMATION
OUTLINE DIMENSIONS
MILLIMETERS
INCHES
DIM
MIN
MAX
2.21
4.57
3.94
2.50
1.52
0.20
5.59
031
MIN
0.077
0.160
0.130
0.079
0.030
0.004
0.200
0.006
MAX
0.087
0.180
0.155
0.098
0.060
0.008
0.220
0.012
A
C
A
1.96
4.06
3.30
2.00
0.76
0.10
5.08
0.15
B
C
B
D
E
H
E
F
G
D
H
NOTES
1. Dimensions are exclusive of mold flash and metal burrs.
F
G
A
PAD LAYOUT DIMENSIONS
MILLIMETERS
MIN MAX
INCHES
DIM
MIN
0.084
0.057
-
MAX
B
C
D
A
B
C
D
2.15
1.45
-
-
-
-
2.55
-
-
0.100
-
1.45
0.057
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 8
PP-SM Series
Only One Name Means ProTek’Tion™
TAPE AND REEL
10 Pitches Cumulaꢀve
Tolerance on tape ± 0.2
P0
D
t
E
F
W
K0
B0
A0
P
User Direcꢀon of Feed
SPECIFICATIONS
TAPE
WIDTH
REEL DIA.
A0
B0
K0
D
E
F
W
P0
P
tmax
330mm (13”)
12mm
3.79 ± 0.15 5.72 ± 0.15 2.46 ± 0.30 1.55 ± 0.05 1.75 ± 0.10 5.5 ± 0.05 12.00 ± 0.30 4.00 ± 0.10 8.00 ± 0.10 0.25 ± 0.10
NOTES
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Suffix - T = 13” Reel - 3,000 pieces per 12mm tape.
4. Marking on Part - marking code (see page 2) and logo.
ORDERING INFORMATION
BASE PART NUMBER
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
PPxxxxSA/SB/SC
-LF
-T
3,000
13”
n/a
This device is only available in a Lead-Free configuraꢀon.
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 9
PP-SM Series
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
In business more than 25 years, ProTek Devices™ is a privately held semiconductor company. The company offers a product line of overvoltage pro-
tecꢀon and overcurrent protecꢀon components. These include transient voltage suppressor array (TVS arrays) avalanche breakdown diode, steering
diode TVS array and electronics SMD chip fuses. These components deliver circuit protecꢀon in electronic systems from numerous overvoltage and
overcurrent events. They include lightning; electrostaꢀc discharge (ESD); nuclear electromagneꢀc pulses (NEMP); inducꢀve switching; and elec-
tromagneꢀc interference (EMI) / radio frequency interference (RFI). ProTek Devices also offers LED wafer die for ESD protecꢀon and related high
frequency products. ProTek Devices is ISO 9001:2015 cerꢀꢁed.
CONTACT US
Corporate Headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telephone
General: 602-431-8101
Sales: & Markeꢀng: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
By Fax
General: 602-431-2288
By Eꢁmail:
Asia Sales: asiasales@protekdevices.com
Europe Sales: europesales@protekdevices.com
U.S. Sales: ussales@protekdevices.com
Distributor Sales: distysales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
ProTek Devices (Asia Pacificꢃ Pte. Ltd.
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
Web
www.protekdevices.com
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,
consequenꢀal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.
ISO 9001: 2015 CERTIFIED
05081.R20 7/19
Page 10
相关型号:
©2020 ICPDF网 联系我们和版权申明