PP3100SB-LF-T13 [PROTEC]

Silicon Surge Protector, 32A, DO-214AA, ROHS AND REACH COMPLIANT, PLASTIC PACKAGE-2;
PP3100SB-LF-T13
型号: PP3100SB-LF-T13
厂家: PROTEK DEVICES    PROTEK DEVICES
描述:

Silicon Surge Protector, 32A, DO-214AA, ROHS AND REACH COMPLIANT, PLASTIC PACKAGE-2

光电二极管
文件: 总9页 (文件大小:810K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
ThyRꢀSTꢁR SuRꢂꢃ SuPPRꢃSSꢁR  
DꢃSCRꢀPTꢀꢁn  
The PP-SM Series are thyristor surge suppression (TSS) devices designed to protect telecommunicaꢀon equipment  
against lightning and transients induced by AC power lines. These devices can be used on central office equipment,  
PBX, DSU, OCU and other telecommunicaꢀon equiment/systems. The bidirecꢀonal configuraꢀon provides protecꢀon  
for both posiꢀve and negaꢀve transients and the discrete surface mount package allows for individual placement of  
the device on line cards or other locaꢀons where mulꢀple component devices do not offer the versaꢀle in board trace  
layout.  
This series can be used to provide protecꢀon in accordance with industry standards such as FCC Part 68, ANSI C62.41,  
UL 1459, GR-1089-CORE, IEC 61000-2, IEC 61000-4 and IEC 61000-4-5 requirements.  
Dꢁꢅ214AA PACꢆAꢂꢃ  
FꢃATuRꢃS  
APPlꢀCATꢀꢁnS  
• T1/E1 Trunk & Line Cards  
• SLIC Line Card  
• DBX Branch Exchange Switches  
• FCC Part 68 Customer Premise Equipment  
• Line Interface Modem  
• IEC Compaꢀbility IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV  
• IEC Compaꢀbility IEC 61000-4-4 (EFT): 40A, 5/50ns  
• IEC Compaꢀbility 61000-4-5 (Surge): 95A, 8/20µs - L4(Line-Ground),  
48A - L4(Line-Line) & 83A - L2(Power)  
• FCC Part 68, UL 1459, Bellcore 1089 & ITU-K.20/K.21 Compliant  
• UL File Recogniꢀon #E208219  
• xDSL Architecture Interface  
• Peak Off-State Voltage from 25 to 300 Volts  
• Surge Current Capability (See Table 1)  
• ESD Protecꢀon > 25 kilovolts  
• Low Capacitance for T1/E1 Trunk & Line Card Applicaꢀons  
• Bidirecꢀonal Configuraꢀon  
• RoHS Compliant  
• REACH Compliant  
ꢄꢃChAnꢀCAl ChARACTꢃRꢀSTꢀCS  
DEVICE SYMBOL  
BIDIRECTIONAL  
• Molded Plasꢀc DO-214AA Package  
• Approximate Weight: 2.5 grams  
• Lead-Free Pure-Tin Plaꢀng (Annealed)  
• Solder Reflow Temperature:  
Pure-Tin - Sn, 100: 260-270°C  
• Flammability Raꢀng UL 94V-0  
• 12mm Tape and Reel per EIA Standard 481  
TAblꢃ 1 ꢅ SuRꢂꢃ RATꢀnꢂS  
SꢃRꢀꢃS  
PP  
2/10µs  
AꢄPS  
PP  
8/20µs  
AꢄPS  
PP  
PP  
PP  
TSꢄ  
60hz  
AꢄPS  
di/dt  
A/µs  
(note 1)  
dv/dt  
V/µs  
(note 1)  
10/160µs  
AꢄPS  
10/560µs  
AꢄPS  
10/1000µs  
AꢄPS  
SA  
SB  
SC  
150  
300  
500  
150  
300  
400  
100  
150  
200  
50  
50  
80  
20  
32  
60  
500  
500  
500  
2000  
2000  
2000  
100  
200  
100  
nꢁTꢃS  
1. Criꢀcal rate of rise for On-State Current (di/dt) and Off-State Voltage (dv/dt).  
www.protekdevices.com  
05081.R11 2/11  
Page 1  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
TyPꢀCAl DꢃVꢀCꢃ ChARACTꢃRꢀSTꢀCS  
ꢄAXꢀꢄuꢄ RATꢀnꢂS @ 25°C uꢇꢈess ꢁtꢉerwise Specified  
PARAꢄꢃTꢃR  
Syꢄbꢁl  
VAluꢃ  
unꢀTS  
Amps  
°C  
Surge Current - 50/60Hz (SC Series)  
Juncꢀon Temperature  
ITSM  
60  
-40 to 150  
-55 to 150  
28  
TA  
Storage Temperature  
TSTG  
°C  
Thermal Resistance (Juncꢀon) - SA & SB Series  
Thermal Resistance (Juncꢀon) - SC Series  
Thermal Resistance (Ambient) - SA & SB Series  
Thermal Resistance (Ambient) - SC Series  
RQJC  
°C/Waꢁ  
°C/Waꢁ  
°C/Waꢁ  
°C/Waꢁ  
RQJC  
26  
RQJA  
90  
RQJA  
85  
FꢀꢂuRꢃ 1  
PulSꢃ WAVꢃFꢁRꢄ  
FꢀꢂuRꢃ 2  
Vꢀ ChARACTꢃRꢀSꢀTC CuRVꢃ  
tf  
IPP  
TEST  
WAVEFORM  
PARAMETERS  
tf = 10µs  
ITSM  
100  
IT  
IS  
td = 1000µs  
Peak Value IPP  
IH  
VS  
td = t/(IPP/2)  
IDRM  
50  
VT  
VDRM  
e-t  
0
0
1
2
3
t - Time - ms  
FꢀꢂuRꢃ 3  
ꢁnꢅSTATꢃ CuRRꢃnT VS SuRꢂꢃ CuRRꢃnT DuRATꢀꢁn  
100  
PPxxxxSA  
PPxxxxSC  
PPxxxxSB  
10  
1
1
10  
100  
Sꢊrge Cꢊrreꢇt Dꢊraꢋoꢇ - Fꢊꢈꢈ Cꢌcꢈes  
1000  
Sꢊppꢈꢌ Freqꢊeꢇcꢌ - 60 hz Siꢇꢊsoidaꢈ  
www.protekdevices.com  
05081.R11 2/11  
Page 2  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
TyPꢀCAl DꢃVꢀCꢃ ChARACTꢃRꢀSTꢀCS  
ꢃlꢃCTRꢀCAl ChARACTꢃRꢀSTꢀCS PꢃR lꢀnꢃ @ 25°C uꢇꢈess ꢁtꢉerwise Specified  
PART  
nuꢄbꢃR  
DꢃVꢀCꢃ  
ꢄARꢆꢀnꢂ  
RꢃPꢃTꢀTꢀVꢃ SWꢀTChꢀnꢂ ꢄꢀnꢀꢄuꢄ SWꢀTChꢀnꢂ ꢄAXꢀꢄuꢄ ꢄAXꢀꢄuꢄ ꢁnꢅSTATꢃ  
TyPꢀCAl  
CuRRꢃnT CAPACꢀTAnCꢃ  
(note 1)  
PꢃAꢆ  
ꢁFFꢅSTATꢃ  
VꢁlTAꢂꢃ  
VꢁlTAꢂꢃ  
hꢁlDꢀnꢂ  
CuRRꢃnT  
(Fig. 7ꢎ  
CuRRꢃnT  
ꢁFFꢅSTATꢃ  
CuRRꢃnT  
(Fig. 4)  
ꢍVDRꢄ  
DRꢄ  
ꢁnꢅSTATꢃ  
VꢁlTAꢂꢃ  
(Fig. 5)  
ꢍꢀT  
ꢍ100V/µs di/dt = 1A/ms  
ꢍ2V, 1ꢄhz  
VDRꢄ  
VS  
h  
ꢀS  
VT  
T  
C
VꢁlTS  
VꢁlTS  
mA  
mA  
µA  
VꢁlTS  
AꢄPS  
pF  
PP0640SA  
PP0720SA  
PP0800SA  
PP1100SA  
PP1300SA  
PP1500SA  
PP1800SA  
PP2300SA  
PP2600SA  
PP3100SA  
PP3500SA  
PP0300SB  
PP0640SB  
PP0720SB  
PP0800SB  
PP1100SB  
PP1300SB  
PP1500SB  
PP1800SB  
PP2300SB  
PP2600SB  
PP3100SB  
PP3500SB  
PP0640SC  
PP0720SC  
PP0800SC  
PP1100SC  
PP1300SC  
PP1500SC  
PP1800SC  
PP2300SC  
PP2600SC  
PP3100SC  
PP3500SC  
nꢁTꢃS  
GC  
GD  
GE  
GF  
GG  
GH  
GI  
58  
65  
77  
88  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
50  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
800  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
2.2  
60  
60  
60  
60  
40  
40  
40  
30  
30  
30  
30  
110  
60  
60  
60  
60  
40  
40  
40  
30  
30  
30  
30  
120  
120  
120  
120  
80  
80  
80  
60  
60  
60  
60  
75  
98  
90  
130  
160  
180  
220  
260  
300  
350  
400  
40  
120  
140  
160  
190  
220  
275  
300  
25  
GJ  
GK  
GL  
GM  
GN  
GP  
GQ  
GR  
GS  
GT  
GU  
GV  
GW  
GX  
GY  
GZ  
HC  
HD  
HE  
HF  
HG  
HH  
HI  
58  
77  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
150  
65  
88  
75  
98  
90  
130  
160  
180  
220  
260  
300  
350  
400  
77  
120  
140  
160  
190  
220  
275  
300  
58  
65  
88  
75  
98  
90  
130  
160  
180  
220  
260  
300  
350  
400  
120  
140  
160  
190  
220  
275  
300  
HJ  
HK  
HL  
HM  
1. Capacitance imblance between posiꢀve and negaꢀve polariꢀes is typically < 15pF.  
www.protekdevices.com  
05081.R11 2/11  
Page 3  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
TyPꢀCAl DꢃVꢀCꢃ ChARACTꢃRꢀSTꢀCS  
FꢀꢂuRꢃ 4  
TyPꢀCAl PꢃAꢆ ꢁFFꢅSTATꢃ CuRRꢃnT  
FꢀꢂuRꢃ 5  
TyPꢀCAl PꢃAꢆ ꢁnꢅSTATꢃ CuRRꢃnT  
VS ꢁnꢅSTATꢃ VꢁlTAꢂꢃ  
VS junCTꢀꢁn TꢃꢄPꢃRATuRꢃ  
10  
100  
1
10  
0.1  
0.01  
1
-40  
0
40  
80  
120  
0
1
2
3
4
5
6
7
tA - Temperatꢊre - °C  
VT - ꢁꢇ-State Voꢈtage - V  
FꢀꢂuRꢃ 6  
FꢀꢂuRꢃ 7  
TyPꢀCAl nꢁRꢄAlꢀꢏꢃD SWꢀTChꢀnꢂ VꢁlTAꢂꢃ  
VS junCTꢀꢁn TꢃꢄPꢃRATuRꢃ  
TyPꢀCAl nꢁRꢄAlꢀꢏꢃD hꢁlDꢀnꢂ CuRRꢃnT  
VS junCTꢀꢁn TꢃꢄPꢃRATuRꢃ  
1.10  
1
2
1
0
0.9  
0.8  
-40  
0
40  
80  
120  
-40  
0
40  
80  
120  
tA - Temperatꢊre - °C  
tA - Temperatꢊre - °C  
www.protekdevices.com  
05081.R11 2/11  
Page 4  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
APPlꢀCATꢀꢁn ꢀnFꢁRꢄATꢀꢁn  
FꢀꢂuRꢃ 1 ꢅ ul 1459 & FCC PART 68 ꢄꢃTAllꢀC PRꢁTꢃCTꢀꢁn  
The TSS (Thyristor Surge Suppressor) device is located across the ꢀp-to-ring aꢂer a limiꢀng resistor and fuse combinaꢀon. RTIP and RRING resistors are opꢀonal de-  
pending upon the TSS device selecꢀon. Without the resistors, the PP3100SB/SC is recommended. However, with a resistance value of 7.5 Ohms for ꢀp and ring, the  
PP3100SA is recommended. Digital signals may use a lower TSS device depending upon the total ꢀp to ring voltage range. Selecꢀon of the TSS device, either PPxxxx-  
SA or SB/SC is based upon the value of the ꢀp and ring resistors. For the Naꢀonal Electric Code (NEC) arꢀcle 800, it is recommended that at least one fuse be used in  
the ꢀp or ring line for metallic surges. Fuses may be replaced with a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device.  
RTip  
Fuse  
TIP  
To Protected  
Equipment  
RING  
RRing  
FꢀꢂuRꢃ 2 ꢅ ul 1459 & FCC PART 68 lꢁnꢂꢀTuDꢀnAl PRꢁTꢃCTꢀꢁn  
There are two TSS devices, one located from ꢀp-to-ground and one ring-to-ground. For standard analog signals, the PP3100SA is recommended with a typical resistor  
value for ꢀp and ring of 15 Ohms. The PP3100SB/SC is recommended for resistor values of 7.5 Ohms each. The Naꢀonal Electric Code (NEC) arꢀcle 800 requires two  
fuse elements when connecꢀng to ground. Fuses or a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device may be used. The  
purpose of this circuit is to limit AC power current from geꢃng on the ground line causing any safety hazard.  
RTip  
TIP  
To Protected  
Equipment  
RING  
RRing  
www.protekdevices.com  
05081.R11 2/11  
Page 5  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
APPlꢀCATꢀꢁn ꢀnFꢁRꢄATꢀꢁn  
FꢀꢂuRꢃ 3 ꢅ ul 1459 & FCC PART 68 ꢄꢃTAllꢀC & lꢁnꢂꢀTuDꢀnAl PRꢁTꢃCTꢀꢁn  
Three equal TSS devices are used in this applicaꢀon for metallic (ꢀp-to-ring) and longitudinal (ꢀp-to-ground and ring-to-ground) protecꢀon. For analog signals, the  
PP3100SB/SC is recommended. With a resistance value of 15 Ohms for the ꢀp and ring resistors, the PP3100SA may be used. The Naꢀonal Electric Code (NEC) arꢀcle  
800 requires two fuse elements when connecꢀng to ground. Fuses or a suitable Posiꢀve Temperature Coefficient (PTC) automaꢀc reseꢁable current limiꢀng device  
may be used. This circuit is recommended for protecꢀon against the Bellcore requirement: First Level Lightning Surge Tests (Telecommunicaꢀons Port), document #  
GR-1089-CORE.  
RTip  
TIP  
To Protected  
Equipment  
RING  
RRing  
CꢀRCuꢀT bꢁARD RꢃCꢁꢄꢄꢃnDATꢀꢁnS  
Circuit board layout is criꢀcal for electromagneꢀc compaꢀbility protecꢀon. The following guidelines are recommended:  
• The protecꢀon device should be placed near the input terminals or connectors, the device will divert the transient current  
immediately before it can be coupled into the nearby traces.  
• The path length between the TVS device and the protected line should be minimized.  
• All conducꢀve loops including power and ground loops should be minimized.  
• The transient current return path to ground should be kept as short as possible to reduce parasiꢀc inductance.  
• Ground planes should be used whenever possible. For mulꢀlayer PCBs, use ground vias.  
www.protekdevices.com  
05081.R11 2/11  
Page 6  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
Dꢁꢅ214AA PACꢆAꢂꢃ ꢀnFꢁRꢄATꢀꢁn  
Polarity Band  
ꢁuTlꢀnꢃ DꢀꢄꢃnSꢀꢁnS  
ꢄꢀllꢀꢄꢃTꢃRS  
ꢀnChꢃS  
Dꢀꢄ  
ꢄꢀn  
ꢄAX  
2.21  
4.57  
3.94  
2.50  
1.52  
0.20  
5.59  
031  
ꢄꢀn  
0.077  
0.160  
0.130  
0.079  
0.030  
0.004  
0.200  
0.006  
ꢄAX  
0.087  
0.180  
0.155  
0.098  
0.060  
0.008  
0.220  
0.012  
A
1.96  
4.06  
3.30  
2.00  
0.76  
0.10  
5.08  
0.15  
A
C
B
C
D
B
E
F
H
E
G
H
D
nꢁTꢃS  
1. Dimensions are exclusive of mold flash and metal burrs.  
F
G
PAD lAyꢁuT DꢀꢄꢃnSꢀꢁnS  
ꢄꢀllꢀꢄꢃTꢃRS  
ꢄꢀn ꢄAX  
ꢀnChꢃS  
A
Dꢀꢄ  
ꢄꢀn  
0.083  
0.050  
-
ꢄAX  
A
B
C
D
2.10  
1.27  
-
-
-
-
2.69  
-
-
0.106  
-
B
C
D
1.27  
0.083  
www.protekdevices.com  
05081.R11 2/11  
Page 7  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
TAPꢃ AnD Rꢃꢃl  
10 Pitches Cumulaꢀve  
Tolerance on tape ± 0.2  
P0  
D
t
E
F
W
K0  
B0  
A0  
P
User Direcꢀon of Feed  
SPꢃCꢀFꢀCATꢀꢁnS  
TAPꢃ  
WꢀDTh  
Rꢃꢃl DꢀA.  
A0  
b0  
ꢆ0  
D
F
W
P0  
P
tmax  
330mm (13”)  
12mm  
3.79 ± 0.15 5.72 ± 0.15 2.46 ± 0.30 1.55 ± 0.05 1.75 ± 0.10 5.5 ± 0.05 12.00 ± 0.30 4.00 ± 0.10 8.00 ± 0.10 0.25 ± 0.10  
nꢁTꢃS  
1. Dimensions are in millimeters.  
2. Surface mount product is taped and reeled in accordance with EIA-481.  
3. Suffix - T13 = 13” Reel - 3,000 pieces per 12mm tape.  
4. Marking on Part - marking code (see page 2) and logo.  
Package outline, pad layout and tape specificaꢀons per document number 06013.R5 2/11  
ꢁRDꢃRꢀnꢂ ꢀnFꢁRꢄATꢀꢁn  
bASꢃ PART nuꢄbꢃR  
lꢃADFRꢃꢃ SuFFꢀX  
TAPꢃ SuFFꢀX  
QTy/Rꢃꢃl  
Rꢃꢃl Sꢀꢏꢃ  
Tubꢃ QTy  
PPxxxxSA/SB/SC  
-LF  
-T13  
3,000  
13”  
n/a  
www.protekdevices.com  
05081.R11 2/11  
Page 8  
PP0640SA - PP3500SC  
Only One Name Means ProTek’Tion™  
CꢁꢄPAny ꢀnFꢁRꢄATꢀꢁn  
CꢁꢄPAny PRꢁFꢀlꢃ  
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for  
the protecꢀon of electronic systems from the effects of lightning, Electrostaꢀc Discharge (ESD), Nuclear Electromagneꢀc Pulse (NEMP), in-  
ducꢀve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide  
applicaꢀon specific protecꢀon soluꢀons for all electronic equipment/systems.  
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.  
CꢁnTACT uS  
Corporate headqꢊarters  
2929 South Fair Lane  
Tempe, Arizona 85282  
USA  
bꢌ Teꢈepꢉoꢇe  
General: 602-431-8101  
Sales: 602-414-5109  
Customer Service: 602-414-5114  
bꢌ Fax  
General: 602-431-2288  
bꢌ ꢃ-maiꢈ:  
Sales: sales@protekdevices.com  
Customer Service: service@protekdevices.com  
Technical Support: support@protekdevices.com  
Weꢐ  
www.protekdevices.com  
www.protekanalog.com  
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.  
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.  
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering  
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of  
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,  
consequenꢀal or incidental damages.  
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.  
www.protekdevices.com  
05081.R11 2/11  
Page 9  

相关型号:

PP3100SB-T

THYRISTOR SURGE SUPPRESSOR
PROTEC

PP3100SB-T13

Silicon Surge Protector, 32A, DO-214AA, PLASTIC PACKAGE-2
PROTEC

PP3100SC

THYRISTOR SURGE SUPPRESSOR
PROTEC

PP3100SC-1

Silicon Surge Protector, 60A, DO-214AA,
PROTEC

PP3100SC-LF

Silicon Surge Protector, 60A, DO-214AA, ROHS AND REACH COMPLIANT, PLASTIC PACKAGE-2
PROTEC

PP3100SC-LF-T

THYRISTOR SURGE SUPPRESSOR
PROTEC

PP3100SC-LF-T13

Silicon Surge Protector, 60A, DO-214AA, ROHS AND REACH COMPLIANT, PLASTIC PACKAGE-2
PROTEC

PP3100SC-T

THYRISTOR SURGE SUPPRESSOR
PROTEC

PP3100SC-T13

Silicon Surge Protector, 60A, DO-214AA, PLASTIC PACKAGE-2
PROTEC

PP312CG5T

Optoelectronic
ETC

PP312CG5W6

Optoelectronic
ETC

PP312CR5T

Optoelectronic
ETC