SM16LC12-T13
更新时间:2024-09-19 05:13:38
品牌:PROTEC
描述:Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Unidirectional, 8 Element, Silicon, PLASTIC, SOP-16
SM16LC12-T13 概述
Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Unidirectional, 8 Element, Silicon, PLASTIC, SOP-16
SM16LC12-T13 数据手册
通过下载SM16LC12-T13数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
500 WATT MULTIꢀLINE LOW CAPACITANCE TVS ARRAY
DESCRIPTION
The SM16LCxx and SM16LCxxC Series are low capacitance mulꢀ-line transient voltage suppressor arrays that provides
board level protecꢀon for standard TTL and MOS bus line applicaꢀons against the damaging effects of ESD, terꢀary
lightning and switching transients.
This series has a peak pulse power raꢀng of 500 Waꢁs for an 8/20µs waveshape. This device series meets the IEC
61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.
SOꢀ16 PACꢁAGE
FEATURES
APPLICATIONS
• Wireless Communicaꢀon Circuits
• RS-422, RS-432 & RS-485
• Low Voltage ASICs
• Compaꢀble with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV
• Compaꢀble with IEC 61000-4-4 (EFT): 40A - 5/50ns
• Compaꢀble with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-
Gnd) & Level 2(Line-Line)
• Ethernet Interfaces
• 500 Waꢁs Peak Pulse Power per Line (tp = 8/20µs)
• Unidirecꢀonal and Bidirecꢀonal Configuraꢀons
• ESD Protecꢀon > 25 kilovolts
MEChANICAL ChARACTERISTICS
• Available in Mulꢀple Voltages Ranging from 3.3V to 36V
• Protects up to 8 Lines
• Low Capacitance: 15pF
• RoHS Compliant
• REACH Compliant
• Molded JEDEC SO-16 Package
• Approximate Weight: 0.15 grams
• Lead-Free Pure-Tin Plaꢀng (Annealed)
• Solder Reflow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• 16mm Tape and Reel Per EIA Standard 481
• Flammability Raꢀng UL 94V-0
PIN CONFIGURATIONS
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
9
UNIDIRECTIONAL
16
15
14
13
12
11
10
1
2
3
4
5
6
7
8
BIDIRECTIONAL
www.protekdevices.com
05051.R13 1/11
Page 1
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
MAXIMUM RATINGS @ 25°C Unless Otꢂerwise Specified
PARAMETER
SYMBOL
VALUE
-55 to 150
-55 to 150
500
UNITS
°C
Operaꢀng Temperature
Storage Temperature
TL
TSTG
PPP
VF
°C
Peak Pulse Power (tp = 8/20µs) - See Figure 1
Forward Voltage @ 50mA, 300µs - Square Wave (See Note 1)
Soldering Temperature for 10 seconds
Waꢁs
Volts
°C
1.5
TII
260
NOTES
1. Only applies to unidirecꢀonal devices.
ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless Otꢂerwise Specified
PART
NUMBER
(Note 1)
RATED
STANDꢀOFF
VOLTAGE
MINIMUM
BREAꢁDOWN
VOLTAGE
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
MAXIMUM
CLAMPING
VOLTAGE
(Fig. 2)
MAXIMUM
LEAꢁAGE
CURRENT
MAXIMUM
CAPACITANCE
TEMPERATURE
COEFFICIENT
OF VꢄBRꢅ
ꢃ1mA
VꢄBRꢅ
VOLTS
ꢃIP = 1A
VC
VOLTS
ꢃVWM
ID
µA
ꢃ0V, 1Mhz
VWM
VOLTS
ꢃ 8/20µs
VC ꢃ IPP
C
pF
qV(BR)
mV/°C
SM16LC03
SM16LC03C
SM16LC05
SM16LC05C
SM16LC08
SM16LC08C
SM16LC12
SM16LC12C
SM16LC15
SM16LC15C
SM16LC24
SM16LC24C
SM16LC36
SM16LC36C
3.3
3.3
4.5
4.5
7.0
7.0
20.0V @ 35A
20.0V @ 35A
24.0V @ 42A
24.0V @ 42A
26.0V @ 30A
26.0V @ 30A
33.0V @ 21A
33.0V @ 21A
39.0V @ 15A
39.0V @ 15A
57.0V @ 10A
57.0V @ 10A
72.0V @ 7A
72.0V @ 7A
125
125
20
20
10
10
2
15
15
15
15
15
15
15
15
15
15
15
15
15
15
-3
-3
3
5.0
6.0
9.8
5.0
6.0
9.8
3
8.0
8.5
13.4
13.4
19.0
19.0
25.5
25.5
40.0
40.0
53.0
53.0
9
8.0
8.5
9
12.0
12.0
15.0
15.0
24.0
24.0
36.0
36.0
13.3
13.3
16.7
16.7
26.7
26.7
40.0
40.0
16
16
17
17
26
26
36
36
2
2
2
2
2
2
2
NOTES
1. Part numbers with a “C” suffix are bidirecꢀonal devices, i.e., SM16LC05C.
www.protekdevices.com
05051.R13 1/11
Page 2
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
FIGURE 1
PEAꢁ PULSE POWER VS PULSE TIME
10,000
1,000
500W, 8/20µs Waveform
100
10
0.1
1
10
100
1,000
10,000
td - Pulse Duraꢆon - µs
FIGURE 2
PULSE WAVE FORM
FIGURE 3
POWER DERATING CURVE
120
100
TEST
Peak Pulse Power
8/20µs
tf
Peak Value IPP
WAVEFORM
PARAMETERS
tf = 8µs
100
80
80
60
td = 20µs
e-t
60
40
20
40
td = t/(IPP/2)
20
0
Average Power
0
0
0
5
10
15
20
25
30
25
50
75 100 125
150
t - Time - µs
TA - Ambient Temperature - °C
www.protekdevices.com
05051.R13 1/11
Page 3
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
TYPICAL DEVICE ChARACTERISTICS
FIGURE 4
OVERShOOT & CLAMPING VOLTAGE FOR SM16LC05
40
30
20
10
0
ESD Test Pulse - 25 kilovolt, 1/30ns (Wavesꢂape)
FIGURE 5
INSERTION LOSS ꢀ SM16LC12
FIGURE 5
RETURN LOSS ꢀ SM16LC12
20
Ref 0
-20
20
Ref 0
-20
-50
-50
100 Mhz per Division
100 Mhz per Division
www.protekdevices.com
05051.R13 1/11
Page 4
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
SPICE MODEL
FIGURE 1
SPICE MODEL
I/O
I/O
LCRD
ABD
LCRD
ABD
LCRD
ABD
LCRD
Lg
0.8nH
Lg
0.8nH
UNIDIRECTIONAL
BIDIRECTIONAL
ABD - Avalanche Breakdown Diode (TVS)
LCRD: Low Capacitance Recꢀfier Diode
Lg - Lead Inductance
TABLE 1 ꢀ SPICE PARAMETERS
PARAMETER
UNIT
ABDꢄTVSꢅ
See Table 2
1
LCRD
BV
IBV
Cjo
IS
V
200
0.01
5
µA
pF
See Table 2
See Table 2
0.6
A
1E-13
0.6
Vj
V
M
N
-
0.33
0.33
1
-
Ohms
s
1
RS
See Table 2
1E-8
0.31
1E-9
1.11
TT
EG
eV
1.11
TABLE 2 ꢀ ABD SPECIFIC SPICE PARAMETERS
PART NUMBER
SM16LC03
BVꢄVOLTSꢅ
4.5
IS ꢄAMPSꢅ
CjoꢄpFꢅ
438
284
146
123
102
61
RsꢄOhMSꢅ
0.21
1E-11
1E-11
1E-11
1E-13
1E-13
1E-13
1E-11
1E-11
1E-11
1E-13
1E-13
1E-13
SM16LC05
6.0
0.14
SM16LC08
8.5
0.28
SM16LC12
13.3
16.7
26.7
4.5
0.40
SM16LC15
0.52
SM16LC24
1.54
SM16LC03C
SM16LC05C
SM16LC08C
SM16LC12C
SM16LC15C
SM16LC24C
438
284
146
123
102
61
0.21
6.0
0.14
8.5
0.28
13.3
16.7
26.7
0.40
0.52
1.54
www.protekdevices.com
05051.R13 1/11
Page 5
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
APPLICATION INFORMATION
Transceiver
D
Line 1
Line 2
Line 3
Line 4
Line 5
Line 6
Line 7
D
R
R
Line 8
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
FIGURE 1 ꢀ BIDIRECTIONAL COMMONꢀMODE PROTECTION
Circuit connecꢀvity is as follows:
• Line 1 connected to Pin 9.
• Line 2 connected to Pin 10.
• Line 3 connected to Pin 11.
• Line 4 connected to Pin 12.
• Line 5 connected to Pin 13.
• Line 6 connected to Pin 14.
• Line 7 connected to Pin 15.
• Line 8 connected to Pin 16.
• Pins 1 - 8 connected to ground.
CIRCUIT BOARD RECOMMENDATIONS
Circuit board layout is criꢀcal for electromagneꢀc compaꢀbility protecꢀon. The following guidelines are recommended:
• The protecꢀon device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
• The path length between the TVS device and the protected line should be minimized.
• All conducꢀve loops including power and ground loops should be minimized.
• The transient current return path to ground should be kept as short as possible to reduce parasiꢀc inductance.
• Ground planes should be used whenever possible. For mulꢀlayer PCBs, use ground vias.
www.protekdevices.com
05051.R13 1/11
Page 6
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
SOꢀ16 PACꢁAGE INFORMATION
-A-
OUTLINE DIMENSIONS
MILLIMETERS
INChES
DIM
MIN
9.80
3.80
1.35
0.35
0.40
MAX
10.00
4.00
MIN
0.386
0.150
0.054
0.014
0.016
MAX
0.393
0.157
0.068
0.019
0.049
16
1
9
8
A
B
-B-
P
0.010” (0.25mm)
B
+
8 PL
M
M
C
1.75
D
0.49
F
1.25
G
1.27 BSC
0.05 BSC
G
R X 45°
D
C
J
0.18
0.10
5.80
0.25
0.25
0.25
6.20
0.50
0.007
0.004
0.229
0.010
0.009
0.008
0.244
0.019
K
0° - 10°
P
-T-
J
R
K
F
0.010” (0.25mm)
T
B
A
+
S
S
M
NOTES
16 PL
1. -T- = Seaꢀng plane and datum surface.
2. Dimensions “A” and “B” are datum.
3. Dimensions “A” and “B” do not include mold protrusion.
4. Maximum mold protrusion is 0.015” (0.380mm) per side.
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.
6. Dimensions are exclusive of mold flash and metal burrs.
A
PAD LAYOUT DIMENSIONS
B
MILLIMETERS
INChES
MIN
DIM
MIN
1.14
0.64
6.22
3.94
1.02
MAX
1.40
0.89
-
MAX
0.055
0.035
-
A
0.045
0.025
0.245
0.155
0.040
B
C
D
E
C
D
4.17
1.27
0.165
0.050
E
NOTES
1. Controlling dimension: inches.
www.protekdevices.com
05051.R13 1/11
Page 7
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
TAPE AND REEL
10 Pitches Cumulaꢀve
Tolerance on tape ± 0.2
P2
P0
D
t
E
Pin 1
F
W
K0
B0
A0
P
User Direcꢀon of Feed
SPECIFICATIONS
TAPE
REEL DIA.
A0
B0
ꢁ0
D
E
F
W
P0
P2
P
tmax
WIDTh
178mm (7”)
16mm 6.50 ± 0.10 10.30 ± 0.10 2.10 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 16.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25
NOTES
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Suffix - T7 = 7” Reel - 1,000 pieces per 16mm tape.
4. Suffix - T13 = 13” Reel - 2,500 pieces per 16mm tape.
5. Bulk product shipped in tubes of 48 pieces per tube.
6. Marking on Part - part number, date code, logo and pin one defined by dot on top of package.
Package outline per document number 06007.R3 1/11.
ORDERING INFORMATION
BASE PART NUMBER
(xx = Voltage)
LEADFREE SUFFIX
TAPE SUFFIX
QTY/REEL
REEL SIZE
TUBE QTY
SM16LCxx/SM16LCxxC
SM16LCxx/SM16LCxxC
-LF
-LF
-T7
1,000
2,500
7”
48
48
-T13
13”
www.protekdevices.com
05051.R13 1/11
Page 8
SM16LC03 - SM16LC36C
Only One Name Means ProTek’Tion™
COMPANY INFORMATION
COMPANY PROFILE
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for
the protecꢀon of electronic systems from the effects of lightning, Electrostaꢀc Discharge (ESD), Nuclear Electromagneꢀc Pulse (NEMP), in-
ducꢀve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide
applicaꢀon specific protecꢀon soluꢀons for all electronic equipment/systems.
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.
CONTACT US
Corporate headquarters
2929 South Fair Lane
Tempe, Arizona 85282
USA
By Telepꢂone
General: 602-431-8101
Sales: 602-414-5109
Customer Service: 602-414-5114
By Fax
General: 602-431-2288
By E-mail:
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
Web
www.protekdevices.com
www.protekanalog.com
COPYRIGHT © ProTek Devices 2000 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,
consequenꢀal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.
www.protekdevices.com
05051.R13 1/11
Page 9
SM16LC12-T13 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
SM16LC12-T7 | PROTEC | Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Unidirectional, 8 Element, Silicon, PLASTIC, SOP-16 | 获取价格 | |
SM16LC12C | MICROSEMI | TVSarray Series | 获取价格 | |
SM16LC12C | PROTEC | 500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRY | 获取价格 | |
SM16LC12C-6 | MICROSEMI | TVSarray Series | 获取价格 | |
SM16LC12C-LF | PROTEC | Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Bidirectional, 16 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-16 | 获取价格 | |
SM16LC12C-LF-T7 | PROTEC | Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Bidirectional, 16 Element, Silicon, SOP-16 | 获取价格 | |
SM16LC12C-T13 | PROTEC | Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Bidirectional, 16 Element, Silicon, PLASTIC, SOP-16 | 获取价格 | |
SM16LC12C-T7 | PROTEC | Trans Voltage Suppressor Diode, 500W, 12V V(RWM), Bidirectional, 16 Element, Silicon, PLASTIC, SOP-16 | 获取价格 | |
SM16LC12C-TR | MICROSEMI | Trans Voltage Suppressor Diode, 300W, 12V V(RWM), Bidirectional, 8 Element, Silicon, PLASTIC, SO-16 | 获取价格 | |
SM16LC12C/TR13 | MICROSEMI | Trans Voltage Suppressor Diode, 12V V(RWM), Bidirectional, | 获取价格 |
SM16LC12-T13 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6