SMDA08CM [PROTEC]

500 WATT MULTI-LINE TVS ARRAY; 500瓦多线TVS阵列
SMDA08CM
型号: SMDA08CM
厂家: PROTEK DEVICES    PROTEK DEVICES
描述:

500 WATT MULTI-LINE TVS ARRAY
500瓦多线TVS阵列

瞬态抑制器 二极管 电视 光电二极管 局域网
文件: 总6页 (文件大小:511K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SMDA05CM - SMDA24CM  
Only One Name Means ProTek’Tion™  
500 WATT MULTIꢀLINE TVS ARRAY  
DESCRIPTIꢁN  
The SMDAxxCM Series are monolithic transient voltage suppressor arrays that provides board level protecꢀon for  
standard TTL and MOS bus line applicaꢀons against the damaging effects of ESD, terꢀary lightning and switching  
transients.  
The SMDAxxCM Series has a peak pulse power raꢀng of 500 Waꢁs for an 8/20µs waveshape. This device series meets  
the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements.  
Sꢁꢀ8 PACꢂAGE  
FEATURES  
APPLICATIꢁNS  
• RS-232, RS-422 & RS-423 Data Lines  
• Microprocessor Based Equipment  
• Control & Monitoring Systems  
• Portable Electronics  
• Sensor Electronics  
• Medical Electronics  
• Compaꢀble with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV  
• Compaꢀble with IEC 61000-4-4 (EFT): 40A - 5/50ns  
• Compaꢀble with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-  
Gnd) & Level 2(Line-Line)  
• 500 Waꢁs Peak Pulse Power per Line (tp = 8/20µs)  
• Bidirecꢀonal Configuraꢀon  
• Available in Mulꢀple Voltages Ranging from 5V to 24V  
• Protects 4-7 Lines  
• Monolithic Design  
• RoHS Compliant  
• REACH Compliant  
MEChANICAL ChARACTERISTICS  
• Molded JEDEC SO-8 Package  
• Approximate Weight: 70 milligrams  
• Lead-Free Pure-Tin Plaꢀng (Annealed)  
• Solder Reflow Temperature:  
Pure-Tin - Sn, 100: 260-270°C  
• 12mm Tape and Reel Per EIA Standard 481  
• Flammability Raꢀng UL 94V-0  
PIN CꢁNFIGURATIꢁN  
8
5
7
6
1
2
3
4
www.protekdevices.com  
05070.R7 9/10  
Page 1  
SMDA05CM - SMDA24CM  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE ChARACTERISTICS  
MAXIMUM RATINGS @ 25°C Unless ꢁtꢃerwise Specified  
PARAMETER  
SYMBꢁL  
VALUE  
-55 to 150  
-55 to 150  
500  
UNITS  
°C  
Operaꢀng Temperature  
Storage Temperature  
TL  
TSTG  
PPP  
°C  
Peak Pulse Power (tp = 8/20µs) - See Figure 1  
Waꢁs  
ELECTRICAL ChARACTERISTICS PER LINE @ 25°C Unless ꢁtꢃerwise Specified  
PART  
NUMBER  
DEVICE  
MARꢂING  
RATED  
STANDꢀꢁFF  
VꢁLTAGE  
MINIMUM  
BREAꢂDꢁWN  
VꢁLTAGE  
MAXIMUM  
CLAMPING  
VꢁLTAGE  
ꢅFig. 2ꢆ  
MAXIMUM  
CLAMPING  
VꢁLTAGE  
ꢅFig. 2ꢆ  
MAXIMUM  
LEAꢂAGE  
CURRENT  
MAXIMUM  
CAPACITANCE  
ꢄ1mA  
V(BR)  
VꢁLTS  
ꢄIP = 1A  
VC  
VꢁLTS  
ꢄVWM  
ID  
µA  
ꢄ0V, 1Mhz  
VWM  
VꢁLTS  
ꢄ 8/20µs  
VC ꢄ IPP  
C
pF  
SMDA05CM  
SMDA08CM  
SMDA12CM  
SMDA15CM  
SMDA24CM  
REB  
REC  
RED  
REF  
REH  
5.0  
8.0  
6.0  
8.5  
9.8  
19.0V @ 30.0A  
23.7V @ 24.0A  
29.2V @ 20.0A  
31.1V @ 18.0A  
45.0V @ 13.0A  
100  
10  
1
350  
300  
150  
100  
63  
13.4  
19.0  
24.0  
43.0  
12.0  
15.0  
24.0  
13.4  
16.7  
26.7  
1
1
www.protekdevices.com  
05070.R7 9/10  
Page 2  
SMDA05CM - SMDA24CM  
Only One Name Means ProTek’Tion™  
TYPICAL DEVICE ChARACTERISTICS  
FIGURE 1  
PEAꢂ PULSE PꢁWER VS PULSE TIME  
10,000  
1,000  
500W, 8/20µs Waveform  
100  
10  
0.1  
1
10  
100  
1,000  
10,000  
td - Pulse Duraꢇon - µs  
FIGURE 2  
PULSE WAVE FꢁRM  
FIGURE 3  
PꢁWER DERATING CURVE  
120  
100  
TEST  
Peak Pulse Power  
8/20µs  
tf  
Peak Value IPP  
WAVEFORM  
PARAMETERS  
tf = 8µs  
100  
80  
80  
60  
td = 20µs  
e-t  
60  
40  
20  
40  
td = t/(IPP/2)  
20  
0
Average Power  
0
0
0
5
10  
15  
20  
25  
30  
25  
50  
75 100 125  
150  
t - Time - µs  
TA - Ambient Temperature - °C  
www.protekdevices.com  
05070.R7 9/10  
Page 3  
SMDA05CM - SMDA24CM  
Only One Name Means ProTek’Tion™  
Sꢁꢀ8 PACꢂAGE INFꢁRMATIꢁN  
-A-  
ꢁUTLINE DIMENSIꢁNS  
MILLIMETERS  
INChES  
DIM  
MIN  
MAX  
5.00  
4.00  
1.75  
0.49  
1.25  
MIN  
0.189  
0.150  
0.054  
0.014  
0.016  
MAX  
0.196  
0.157  
0.068  
0.019  
0.049  
8
1
5
4
A
4.80  
3.80  
1.35  
0.35  
0.40  
B
M
0.010” (0.25mm)  
M
+
4 PL  
P
-B-  
B
C
D
F
G
D
R x 45°  
C
G
1.27 BSC  
0.05 BSC  
0° - 10°  
J
0.18  
0.10  
5.80  
0.25  
0.25  
0.25  
6.20  
0.50  
0.007  
0.004  
0.229  
0.010  
0.009  
0.008  
0.244  
0.019  
-T-  
K
K
B
J
F
P
0.010” (0.25mm)  
T
A
S S  
+
8 PL  
M
R
NꢁTES  
1. -T- = Seaꢀng plane and datum surface.  
2. Dimensions “A” and “B” are datum.  
3. Dimensions “A” and “B” do not include mold protrusion.  
4. Maximum mold protrusion is 0.015” (0.380mm) per side.  
5. Dimensioning and tolerances per ANSI Y14.5M, 1982.  
6. Dimensions are exclusive of mold flash and metal burrs.  
A
PAD LAYꢁUT DIMENSIꢁNS  
B
MILLIMETERS  
INChES  
DIM  
MIN  
MAX  
1.40  
0.89  
-
MIN  
0.045  
0.025  
0.245  
0.155  
0.040  
MAX  
0.055  
0.035  
-
A
1.14  
0.64  
6.22  
3.94  
1.02  
B
D
E
C
C
D
4.17  
1.27  
0.165  
0.050  
E
NꢁTES  
1. Controlling dimension: inches.  
www.protekdevices.com  
05070.R7 9/10  
Page 4  
SMDA05CM - SMDA24CM  
Only One Name Means ProTek’Tion™  
TAPE AND REEL  
10 Pitches Cumulaꢀve  
Tolerance on tape ± 0.2  
P2  
P0  
D
t
E
Pin 1  
F
W
K0  
B0  
A0  
P
User Direcꢀon of Feed  
SPECIFICATIꢁNS  
TAPE  
REEL DIA.  
A0  
B0  
ꢂ0  
D
E
F
W
P0  
P2  
P
tmax  
WIDTh  
178mm (7”)  
12mm 6.50 ± 0.10 5.40 ± 0.10 2.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.05 12.00 ± 0.30 4.00 ± 0.12 2.00 ± 0.10 4.00 ± 0.10 0.25  
NꢁTES  
1. Dimensions are in millimeters.  
2. Surface mount product is taped and reeled in accordance with EIA-481.  
3. Suffix - T7 = 7” Reel - 1,000 pieces per 12mm tape.  
4. Suffix - T13 = 13” Reel - 2,500 pieces per 12mm tape.  
5. Bulk product shipped in tubes of 98 pieces per tube.  
6. Marking on Part - marking code (see page 2), date code, logo and pin one defined by dot on top of package.  
Package outline, pad layout and tape specificaꢀons per document number 06011.R4 8/10.  
ꢁRDERING INFꢁRMATIꢁN  
BASE PART NUMBER  
LEADFREE SUFFIX  
TAPE SUFFIX  
QTY/REEL  
REEL SIZE  
TUBE QTY  
(xx = Voltage)  
SMDAxxCM  
-LF  
-LF  
-T7  
1,000  
2,500  
7”  
98  
98  
SMDAxxCM  
-T13  
13”  
www.protekdevices.com  
05070.R7 9/10  
Page 5  
SMDA05CM - SMDA24CM  
Only One Name Means ProTek’Tion™  
CꢁMPANY INFꢁRMATIꢁN  
CꢁMPANY PRꢁFILE  
ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for  
the protecꢀon of electronic systems from the effects of lightning, Electrostaꢀc Discharge (ESD), Nuclear Electromagneꢀc Pulse (NEMP), in-  
ducꢀve switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide  
applicaꢀon specific protecꢀon soluꢀons for all electronic equipment/systems.  
ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products.  
CꢁNTACT US  
Corporate headquarters  
2929 South Fair Lane  
Tempe, Arizona 85282  
USA  
By Telepꢃone  
General: 602-431-8101  
Sales: 602-414-5109  
Customer Service: 602-414-5114  
By Fax  
General: 602-431-2288  
By E-mail:  
Sales: sales@protekdevices.com  
Customer Service: service@protekdevices.com  
Technical Support: support@protekdevices.com  
Web  
www.protekdevices.com  
www.protekanalog.com  
COPYRIGHT © ProTek Devices 2007 - This literature is subject to all applicable copyright laws and is not for resale in any manner.  
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characterisꢀcs described herein without noꢀce.  
DESIGN CHANGES: ProTek reserves the right to disconꢀnue product lines without noꢀce and that the final judgement concerning selecꢀon and specificaꢀons is the buyer’s and that in furnishing engineering  
and technical assistance. ProTek assumes no responsibility with respect to the selecꢀon or specificaꢀons of such products. ProTek makes no warranty, representaꢀon or guarantee regarding the suitability of  
its products for any parꢀcular purpose, nor does ProTek assume any liability arising out of the applicaꢀon or use of any product or circuit and specifically disclaims any and all liability without limitaꢀon special,  
consequenꢀal or incidental damages.  
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wriꢁen consent from the factory.  
www.protekdevices.com  
05070.R7 9/10  
Page 6  

相关型号:

SMDA08CM-LF

Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Bidirectional, 8 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC

SMDA08CM-LF-T13

Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Bidirectional, 8 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC

SMDA08CM-LF-T7

Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Bidirectional, 8 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC

SMDA08CM-T13

Trans Voltage Suppressor Diode, 500W, 8.5V V(RWM), Bidirectional, 8 Element, Silicon, PLASTIC, SOP-8
PROTEC

SMDA08LC

500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY
PROTEC

SMDA08LC-T13-LF

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC

SMDA08LC-T7

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 4 Element, Silicon, PLASTIC, SOP-8
PROTEC

SMDA08LC-T7-LF

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Unidirectional, 4 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC

SMDA08LCC

500 WATT MULTI-LINE LOW CAPACITANCE TVS ARRAY
PROTEC

SMDA08LCC-LF

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 8 Element, Silicon, ROHS AND REACH COMPLIANT, PLASTIC, SOP-8
PROTEC

SMDA08LCC-T13

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 8 Element, Silicon, PLASTIC, SOP-8
PROTEC

SMDA08LCC-T7

Trans Voltage Suppressor Diode, 500W, 8V V(RWM), Bidirectional, 8 Element, Silicon, PLASTIC, SOP-8
PROTEC