4309-52 [PSEMI]
50 ヘ RF Digital Attenuator 6-bit, 31.5 dB, DC-4.0 GHz; 50ヘ射频数字衰减器6位, 31.5分贝, DC- 4.0 GHz的型号: | 4309-52 |
厂家: | Peregrine Semiconductor |
描述: | 50 ヘ RF Digital Attenuator 6-bit, 31.5 dB, DC-4.0 GHz |
文件: | 总9页 (文件大小:338K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Product Specification
PE4309
50 Ω RF Digital Attenuator
6-bit, 31.5 dB, DC-4.0 GHz
Product Description
Features
This product is a high linearity, 6-bit RF Digital Step Attenuator
(DSA) covering a 31.5 dB attenuation range in 0.5 dB steps.
The Peregrine 50Ω RF DSA provides a parallel CMOS control
interface and it operates on 3-volt to 5-volt supply. It maintains
high attenuation accuracy over frequency and temperature and
exhibits very low insertion loss and low power consumption.
This Peregrine DSA is available in a 4x4 mm 24 lead QFN
footprint with an exposed ground paddle.
• Best in class 2.0 kV HBM ESD tolerance
• Low Insertion Loss: 1.6 dB typical
• Attenuation: 0.5 dB steps to 31.5 dB
• High Linearity: Typical 52 dB IP3
• Best in Class Attenuation accuracy
• Parallel programming interface
• Single supply, 3V to 5V operation
The PE4309 is manufactured on Peregrine’s UltraCMOS™
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional
CMOS.
• Standard 3V or 5V CMOS control logic
independent of supply voltage
• Very low power consumption
• RoHS-compliant 24-lead 4x4 mm QFN
Figure 1. Functional Schematic Diagram
Figure 2. Package Type
4x4 mm 24-Lead QFN
Switched Attenuator Array
RF Input
RF Output
6
Parallel Control
Control Logic Interface
Table 1. Electrical Specifications@ +25°C, VDD = 3.0 V - 5.0 V
Parameter
Test Conditions4
Frequency
Min
Typ
Maximum
Units
Operation Frequency
DC
4000
MHz
DC - 2.2 GHz
2.2 - 4.0 GHz
-
-
1.6
2.2
2
3.4
dB
dB
Insertion Loss
Any Bit or Bit Combination
Any Bit or Bit Combination
0.5 - 7.5 dB States 3
DC ≤ 1.0 GHz
1.0 < 2.2 GHz
2.2 < 3.8 GHz
2.2 < 3.8 GHz
2.2 < 3.8 GHz
-
-
-
-
-
-
-
±(0.10 + 3% of atten setting), not to exceed +0.20 dB
dB
dB
dB
dB
dB
±(0.15 + 3% of atten setting)
Attenuation Accuracy
0.15
0.7
1.2
-
-
-
8.0 - 15.5 dB States 3
16.0 - 31.5 dB States3
1 MHz - 2.2 GHz
2.2 - 4.0 GHz
30
-
32
32
-
-
dBm
dBm
1 dB Compression2
Input IP31
1 MHz - 2.2 GHz
2.2 - 4.0 GHz
-
-
52
45
-
-
dBm
dBm
Two-tone inputs +18 dBm
DC - 2.2 GHz
2.2 - 4.0 GHz
15
10
20
20
-
-
dB
dB
Return Loss
50% of control voltage to
90% of final attenuation level
Switching Speed
-
-
1
µs
Notes: 1. Device Linearity will begin to degrade below 5 MHz.
2. Note Absolute Maximum in Table 4.
3. See Figures 12 and 13 for typical attenuation error.
4. Measurements made in a 50 ohm system (see Figure 4, Test Circuit Block Diagram). Resistors (R2, R3, R5, R6, R7) with a
value of 10K-ohm are used to decouple the RF path from the control inputs.
Document No. 70-0218-06 │ www.psemi.com
©2007 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 9
PE4309
Product Specification
Figure 3. Pin Configuration (Top View)
Table 3. Operating Ranges
Parameter
Min
Typ
Max
Units
VDD Power Supply
Voltage
3.0
3.3
5.5
V
N/C
VDD
N/C
18
17
16
1
2
3
N/C
N/C
N/C
RF2
N/C
ACG
I
DD Power Supply
100
250
+24
µA
Current
Exposed
Ground
Paddle
dBm
PIN Input power (50Ω)
4
15
14
13
RF1
N/C
5
6
Table 4. Absolute Maximum Ratings
ACG
Symbol
Parameter/Conditions Min Max Units
VDD
Power supply voltage
-0.3
-0.3
-65
6.0
6.0
V
V
VI
Voltage on any DC input
Storage temperature range
TST
150
°C
Table 2. Pin Descriptions
Operating temperature
range
Pin No. Pin Name
Description
TOP
-40
85
°C
1
2
N/C
VDD
No Connect
PIN
30
dBm
V
Input power (50Ω)
Power supply pin
ESD voltage (Human Body
Model)
3
N/C
No Connect
VESD
2000
4
RF1
N/C5
ACG6
ACG6
ACG6
ACG6
ACG6
ACG6
N/C7
ACG6
N/C5
RF2
N/C5
N/C5
N/C5
C16
RF port
5
No Connect
Electrostatic Discharge (ESD) Precautions
6
AC Ground connection
AC Ground connection
AC Ground connection
AC Ground connection
AC Ground connection
AC Ground connection
No Connect
7
When handling this UltraCMOS™ device, observe the
same precautions that you would use with other ESD-
sensitive devices. Although this device contains
circuitry to protect it from damage due to ESD,
precautions should be taken to avoid exceeding the
rate specified in Table 4.
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Paddle
Latch-Up Avoidance
AC Ground connection
No Connect
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
RF port
No Connect
No Connect
Table 5. Control Voltage
No Connect
State
Bias Condition
Attenuation control bit, 16 dB
Attenuation control bit, 8 dB
Attenuation control bit, 4 dB
Attenuation control bit, 2 dB
Attenuation control bit, 1 dB
Attenuation control bit, 0.5 dB
Ground for proper operation
Low
0 to +1.0 Vdc at 2 µA (typ)
C8
High
+2.0 to +5 Vdc at 10 µA (typ)
C4
The standard 3V or 5V CMOS control logic is
independent of supply voltage.
C2
C1
C0.5
GND
Table 6. Truth Table
C16
C8
C4
C2
C1 C0.5 Attenuation State
Notes: 5. For improved RF performance these No Connect pins can
be connected to RF ground.
1
1
1
1
1
1
0
0
1
1
1
1
1
0
1
0
1
1
1
1
0
1
1
0
1
1
1
0
1
1
1
0
1
1
0
1
1
1
1
0
1
0
1
1
1
1
1
0
Reference Loss (IL)
0.5 dB
1 dB
6. Pins can either be grounded directly or through coupling
capacitors
2 dB
7. Pin can either be grounded or No Connect
4 dB
Exposed Solder Pad Connection
8 dB
16 dB
31.5 dB
The exposed solder pad on the bottom of the package
must be grounded for proper device operation.
©2007 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0218-06 │ UltraCMOS™ RFIC Solutions
Page 2 of 9
PE4309
Product Specification
Figure 4. Test Circuit Block Diagram
Peregrine Specification 102-0371
J1
CWN-350-14-0000
C16
C8
14
12
10
8
13
11
9
GND
GND
GND
GND
GND
GND
GND
DB7
DB6
DB5
DB4
DB3
DB2
DB1
C4
C2
7
C1
6
5
C0.5
4
3
2
1
VDD
R4
DNI
R1
0 OHM
VDD
C1
0.1µF
C2
100pF
1
2
3
4
5
6
18
17
16
15
14
13
NC
NC
NC
VDD
NC
J2
SMASM
J3
SMASM
NC
Z=50 Ohm
Z=50 Ohm
U1
C3
100pF
MLPQ4X4_24L
C4
100pF
1
1
RF1
NC
RF2
NC
ACG
ACG
ECT BP050-0024UJ03 4x4
MLP 24 Ld Socket
Document No. 70-0218-06 │ www.psemi.com
©2007 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 9
PE4309
Product Specification
Figure 5. Evaluation Board Layout
Evaluation Kit
Peregrine Specification 101/0299
The Digital Attenuator Evaluation Kit board was
designed to ease customer evaluation of the
PE4309 Digital Step Attenuator. Connect J2 by
mini clip to Vdd to power the IC. Connect J8 by
mini clip to power the evaluation board support
circuits. The control bits for the six parallel data
inputs (C0.5 to C16) are controlled using S2-S7 to
select bits or bit combinations. This allows any
attenuation setting to be specified as shown in
Table 6.
The de-embed trace (J6 to J7) estimates the PCB
insertion loss for removal from the evaluation
board measurement data.
To evaluate using customer software, J1 can be
installed using a standard 0.100 IDC header
(some circuit modification required, see
schematic).
The ability to supply different voltages for the
Control circuitry (using J8) and IC Vdd (using J2)
circuits allows for evaluation of circuits using
different control vs. supply voltages.
Figure 6. Evaluation Board Schematic
Peregrine Specification 102/0366
©2007 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0218-06 │ UltraCMOS™ RFIC Solutions
Page 4 of 9
PE4309
Product Specification
Typical Performance Data
Figure 7. Insertion Loss, Vdd = 3.0 V
Figure 8. Attenuation at Major Steps
31.5 dB
16 dB
8 dB
4 dB
2 dB
1 dB
0.5 dB
Figure 9. Input Return Loss at Major
Attenuation Steps
Figure 10. Output Return Loss at Major
Attenuation Steps
0 dB
0 dB
16 dB
16 dB
31.5 dB
31.5 dB
Document No. 70-0218-06 │ www.psemi.com
©2007 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 9
PE4309
Product Specification
Typical Performance Data
Figure 11. Attenuation Error Vs. Frequency
16 dB
8 dB
31.5 dB
Figure 12. Attenuation Error vs. Setting:
Low Frequency
Figure 13. Attenuation Error vs. Setting:
High Frequency
©2007 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0218-06 │ UltraCMOS™ RFIC Solutions
Page 6 of 9
PE4309
Product Specification
Figure 16. Package Drawing
QFN 4x4 mm
MAX
NOM
MIN
0.900
0.850
0.800
A
Document No. 70-0218-06 │ www.psemi.com
©2007 Peregrine Semiconductor Corp. All rights reserved.
Page 7 of 9
PE4309
Product Specification
Figure 17. Tape and Reel Drawing
Figure 18. Marking Specifications
4309
YYWW
ZZZZZ
YYWW = Date Code
ZZZZZ = Last five digits of Lot Number
Table 7. Ordering Information
Order Code
4309-00
Part Marking
PE4309-EK
4309
Description
Package
Shipping Method
1 / Box
PE4309-24QFN 4x4mm-EK
PE4309G-24QFN 4x4mm-75A
PE4309G-24QFN 4x4mm-3000C
Evaluation Kit
4309-51
Green 24-lead 4x4mm QFN
Green 24-lead 4x4mm QFN
75 units / Tube
3000 units / T&R
4309-52
4309
©2007 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0218-06 │ UltraCMOS™ RFIC Solutions
Page 8 of 9
PE4309
Product Specification
Sales Offices
The Americas
Peregrine Semiconductor Corporation
Peregrine Semiconductor, Asia Pacific (APAC)
Shanghai, 200040, P.R. China
Tel: +86-21-5836-8276
Fax: +86-21-5836-7652
9380 Carroll Park Drive
San Diego, CA 92121
Tel: 858-731-9400
Fax: 858-731-9499
Peregrine Semiconductor, Korea
#B-2607, Kolon Tripolis, 210
Geumgok-dong, Bundang-gu, Seongnam-si
Gyeonggi-do, 463-943 South Korea
Tel: +82-31-728-3939
Europe
Peregrine Semiconductor Europe
Bâtiment Maine
Fax: +82-31-728-3940
13-15 rue des Quatre Vents
F-92380 Garches, France
Tel: +33-1-4741-9173
Fax : +33-1-4741-9173
Peregrine Semiconductor K.K., Japan
Teikoku Hotel Tower 10B-6
1-1-1 Uchisaiwai-cho, Chiyoda-ku
Tokyo 100-0011 Japan
Tel: +81-3-3502-5211
Fax: +81-3-3502-5213
Space and Defense Products
Americas:
Tel: 858-731-9453
Europe, Asia Pacific:
180 Rue Jean de Guiramand
13852 Aix-En-Provence Cedex 3, France
Tel: +33-4-4239-3361
Fax: +33-4-4239-7227
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The information in this data sheet is believed to be reliable.
However, Peregrine assumes no liability for the use of this
information. Use shall be entirely at the user’s own risk.
The product is in a formative or design stage. The data
sheet contains design target specifications for product
development. Specifications and features may change in
any manner without notice.
No patent rights or licenses to any circuits described in this
data sheet are implied or granted to any third party.
Preliminary Specification
Peregrine’s products are not designed or intended for use in
devices or systems intended for surgical implant, or in other
applications intended to support or sustain life, or in any
application in which the failure of the Peregrine product could
create a situation in which personal injury or death might occur.
Peregrine assumes no liability for damages, including
consequential or incidental damages, arising out of the use of
its products in such applications.
The data sheet contains preliminary data. Additional data
may be added at a later date. Peregrine reserves the right
to change specifications at any time without notice in order
to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine
decides to change the specifications, Peregrine will notify
customers of the intended changes by issuing a DCN
(Document Change Notice).
The Peregrine name, logo, and UTSi are registered trademarks
and UltraCMOS, HaRP and MultiSwitch are trademarks of
Peregrine Semiconductor Corp.
Document No. 70-0218-06 │ www.psemi.com
©2007 Peregrine Semiconductor Corp. All rights reserved.
Page 9 of 9
相关型号:
4309K-101-1000DBD
Array/Network Resistor, Bussed, Thin Film, 0.15W, 100ohm, 50V, 0.5% +/-Tol, -50,50ppm/Cel, 8808,
BOURNS
4309K-101-1802BCAL
Array/Network Resistor, Bussed, Thin Film, 0.15W, 18000ohm, 50V, 0.1% +/-Tol, -25,25ppm/Cel, 8808,
BOURNS
4309K-101-3600DCB
Array/Network Resistor, Bussed, Thin Film, 0.15W, 360ohm, 50V, 0.5% +/-Tol, -25,25ppm/Cel, 8808,
BOURNS
4309K-101-3601BAD
Array/Network Resistor, Bussed, Thin Film, 0.15W, 3600ohm, 50V, 0.1% +/-Tol, -100,100ppm/Cel, 8808,
BOURNS
4309K-101-4302FCL
Array/Network Resistor, Bussed, Thin Film, 0.15W, 43000ohm, 50V, 1% +/-Tol, -25,25ppm/Cel, 8808,
BOURNS
4309K-101-4702FBL
Array/Network Resistor, Bussed, Thin Film, 0.15W, 47000ohm, 50V, 1% +/-Tol, -50,50ppm/Cel, 8808,
BOURNS
4309K-101-5102DAL
Array/Network Resistor, Bussed, Thin Film, 0.15W, 51000ohm, 50V, 0.5% +/-Tol, -100,100ppm/Cel, 8808,
BOURNS
4309K-101-6200BBD
Array/Network Resistor, Bussed, Thin Film, 0.15W, 620ohm, 50V, 0.1% +/-Tol, -50,50ppm/Cel, 8808,
BOURNS
4309K-101-6201DBDL
Array/Network Resistor, Bussed, Thin Film, 0.15W, 6200ohm, 50V, 0.5% +/-Tol, -50,50ppm/Cel, 8808,
BOURNS
4309K-101-8201DCDL
Array/Network Resistor, Bussed, Thin Film, 0.15W, 8200ohm, 50V, 0.5% +/-Tol, -25,25ppm/Cel, 8808,
BOURNS
4309K-106-1602BCBL
Array/Network Resistor, Series, Thin Film, 0.15W, 16000ohm, 50V, 0.1% +/-Tol, -25,25ppm/Cel, 8808,
BOURNS
4309K-106-1800DC
Array/Network Resistor, Series, Thin Film, 0.15W, 180ohm, 50V, 0.5% +/-Tol, -25,25ppm/Cel, 8808,
BOURNS
©2020 ICPDF网 联系我们和版权申明