PE4272-EK 概述
SPDT Broadband UltraCMOS? DC - 3 GHz RF Switch SPDT宽带的UltraCMOS ™ DC - 3 GHz的RF开关
PE4272-EK 数据手册
通过下载PE4272-EK数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Product Specification
PE4272
SPDT Broadband UltraCMOS™
DC – 3 GHz RF Switch
Product Description
The PE4272 RF Switch is designed for the TV tuner, PCTV, set
top box, DTV, DVR and general broadband applications. This
device offers industry leading broadband linearity, 1.5 kV ESD
tolerance and a simple CMOS interface. The device offers a
simple alternative solution to pin diode and mechanical relay
switches.
Features
• High ESD tolerance of 1.5 kV
• Single-pin CMOS logic control
• Low insertion loss: 0.5 dB at 1000 MHz,
0.6 dB at 2000 MHz
• Isolation of 43 dB at 1000 MHz, 33.5 dB
The PE4272 SPDT High Power RF Switch is manufactured on
Peregrine’s UltraCMOS™ process, a patented variation of
silicon-on-insulator (SOI) technology on a sapphire substrate,
offering the performance of GaAs with the economy and
integration of conventional CMOS.
at 2000 MHz
• Typical input 1 dB compression point of
+32 dBm
• Small 8-lead MSOP package
Figure 1. Functional Diagram
RFC
Figure 2. Package Type
8-lead MSOP
RF1
RF2
CMOS
Control
Driver
VDD CTRL
Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 75 ꢀ)
Parameter
Conditions
Min
Typ
Max
Units
Operation Frequency1
DC – 3000
MHz
1000 MHz
2000 MHz
0.5
0.6
0.6
0.7
Insertion Loss
dB
dB
dB
1000 MHz
2000 MHz
41
31.5
43
33.5
Isolation – RFC to RF1/RF2
Isolation – RF1 to RF2
1000 MHz
2000 MHz
41
32
43
34
1000 MHz
2000 MHz
19.5
16
Return Loss
dB
ns
‘ON’ Switching Time3
‘OFF’ Switching Time3
Video Feedthrough2,3
Input 1 dB Compression3
50% CTRL to 0.1 dB final value, 2 GHz
50% CTRL to 25 dB isolation, 2 GHz
500
500
<3
1000
1000
ns
mVpp
dBm
1000 MHz
30
32
Input IP33
1000 MHz, 20 dBm input power
52
dBm
Notes:
1. Device linearity will begin to degrade below 5 MHz.
2. Measured with a 1 ns risetime, 0/3 V pulse and 500 MHz bandwidth.
3. Measured in a 50 Ω system.
Document No. 70-0173-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 11
PE4272
Product Specification
Figure 3. Pin Configuration (Top View)
Table 4. Absolute Maximum Ratings
Symbol
Parameter/Conditions
Min Max Units
VDD
Power supply voltage
-0.3
-0.3
4.0
V
V
1
2
3
4
8
7
6
5
VDD
CTRL
GND
RFC
RF1
GND
GND
RF2
VDD
+
VI
Voltage on any input
0.3
TST
PIN
Storage temperature range
-65
150
34
°C
4272
dBm
Input power (50 ꢀ)
ESD voltage (HBM, ML_STD
883 Method 3015.7)
VESD
1500
V
Absolute Maximum Ratings are those values
listed in the above table. Exceeding these values
may cause permanent device damage.
Functional operation should be restricted to the
limits in the Operating Ranges table. Exposure to
absolute maximum ratings for extended periods
may affect device reliability.
Table 2. Pin Descriptions
Pin
No.
Pin
Name
Description
1
VDD
Nominal +3 V supply connection.
CMOS logic level:
2
CTRL
High = RFC to RF1 signal path
Low = RFC to RF2 signal path
Latch-Up Avoidance
Ground connection. Traces should be
physically short and connected to ground
plane for best performance.
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
3
GND
4
5
RFC
RF2
RF Common port.4
RF2 port.4
Electrostatic Discharge (ESD) Precautions
Ground Connection. Traces should be
physically short and connected to ground
plane for best performance.
When handling this UltraCMOS™ device, observe
the same precautions that you would use with
other ESD-sensitive devices. Although this device
contains circuitry to protect it from damage due to
ESD, precautions should be taken to avoid
exceeding the rating specified in Table 4.
6
GND
Ground Connection. Traces should be
physically short and connected to ground
plane for best performance.
7
8
GND
RF1
RF1 port.4
Note: 4. All RF pins must be DC blocked with an external
series capacitor or held at 0 VDC
.
Table 3. Operating Ranges
Parameter
Min
Typ
Max
Units
VDD Power Supply Voltage
2.7
3.0
3.3
V
I
DD Power Supply Current
8
20
85
µA
(VDD = 3 V, CTRL = 3 V)
Operating temperature
range
-40
°C
V
Control Voltage High
Control Voltage Low
0.7xVDD
0.3xVDD
V
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0173-03 │ UltraCMOS™ RFIC Solutions
Page 2 of 11
PE4272
Product Specification
Table 5. Single-pin Control Logic Truth Table
Control Logic Input
Control Voltages
Signal Path
The PE4272 is a versatile RF CMOS switch that
supports two operating control modes; single-pin
control mode and complementary-pin control
mode.
Pin 1 (VDD) = VDD
Pin 2 (CTRL) = High
RFC to RF1
Pin 1 (VDD) = VDD
Pin 2 (CTRL) = Low
RFC to RF2
Single-pin control mode enables the switch to
operate with a single control pin (pin 2) supporting
a +3-volt CMOS logic input, and requires a
dedicated +3-volt power supply connection (pin 1).
This mode of operation reduces the number of
control lines required and simplifies the switch
control interface typically derived from a CMOS
µProcessor I/O port.
Table 6. Complementary-pin Control Logic
Truth Table
Control Voltages
Signal Path
Pin 1 (VDD) = Low
Pin 2 (CTRL) = High
RFC to RF1
Pin 1 (VDD) = High
Pin 2 (CTRL) = Low
Complementary-pin control mode allows the
switch to operate using complementary control
pins CTRL and VDD (pins 2 & 1), that can be
directly driven by +3-volt CMOS logic or a suitable
µProcessor I/O port. This enables the PE4272 to
operate in positive control voltage mode within the
PE4272 operating limits.
RFC to RF2
Document No. 70-0173-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 11
PE4272
Product Specification
Figure 4. Evaluation Board Layouts
Peregrine specification 101/0243
Evaluation Kit
The SPDT Switch Evaluation Kit board was
designed to ease customer evaluation of the
PE4272 SPDT switch. The RF common port is
connected through a 75 ꢀ transmission line to the
bottom F connector, J2. Port 1 and Port 2 are
connected through 75 ꢀ transmission lines to two F
connectors on either side of the board, J1 and J3. A
through transmission line connects F connectors J4
and J5. This transmission line can be used to
estimate the loss of the PCB over the environmental
conditions being evaluated.
The board is constructed of a two metal layer FR4
material with a total thickness of 0.031”. The bottom
layer provides ground for the RF transmission lines.
The transmission lines were designed using a
coplanar waveguide with ground plane model using
a trace width of 0.021”, trace gaps of 0.030”,
dielectric thickness of 0.028”, copper thickness of
0.0021” and εr of 4.3.
J6 provides a means for controlling the DC inputs to
the device. The lower right pin (J6-2) is connected
to the device CTRL input. The upper right pin (J6-1)
is connected to the device VDD input. Footprints for
decoupling capacitors are provided on both CTRL
and VDD traces. It is the responsibility of the
customer to determine proper supply decoupling for
their design application. Removing these
components from the evaluation board has not been
shown to degrade RF performance.
Figure 5. Evaluation Board Schematic
Peregrine specification 102/0309
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0173-03 │ UltraCMOS™ RFIC Solutions
Page 4 of 11
PE4272
Product Specification
Typical Performance Data
Figure 6. Insertion Loss: RFC-RF1 @ 25 °C
Figure 7. Insertion Loss: RFC-RF1 @ 3 V
Figure 8. Insertion Loss: RFC-RF2 @ 25 °C
Figure 9. Insertion Loss: RFC-RF2 @ 3 V
Document No. 70-0173-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 11
PE4272
Product Specification
Typical Performance Data
Figure 10. Isolation: RFC-RF1 @ 25 °C
Figure 11. Isolation: RFC-RF1 @ 3 V
Figure 12. Isolation: RFC-RF2 @ 25 °C
Figure 13. Isolation: RFC-RF2 @ 3 V
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0173-03 │ UltraCMOS™ RFIC Solutions
Page 6 of 11
PE4272
Product Specification
Typical Performance Data
Figure 14. Isolation: RF1-RF2 @ 25 °C
Figure 15. Isolation: RF1-RF2 @ 3 V
Figure 16. Return Loss: RFC-RF1 @ 25 °C
Figure 17. Return Loss: RFC-RF1 @ 3 V
Document No. 70-0173-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 7 of 11
PE4272
Product Specification
Typical Performance Data
Figure 18. Return Loss: RFC-RF2 @ 25 °C
Figure 19. Return Loss RFC-RF2 @ 3 V
Figure 20. Return Loss: RFC-RF1/RF2 @ 25 °C
Figure 21. Return Loss: RFC-RF1/RF2 @ 3 V
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0173-03 │ UltraCMOS™ RFIC Solutions
Page 8 of 11
PE4272
Product Specification
Figure 22. Package Drawing
8-lead MSOP
TOP VIEW
0.65BSC
.525BSC
12o REF
8
7
6
5
R 0.90 MIN
R 0.90 MIN
2.45±0.10
2X
GAGE
PLANE
3.00±0.10
0o
6o
12o REF
0.25
±0.15
0.55
0.51±0.13
0.51±0.13
- B -
0.95 BSC
2
3
4
1
.25
A
B
C
- C -
2.95±0.10
0.86±0.08
0.10±0.05
2.95±0.10
1.10 MAX
- A -
+0.07
3.00±0.10
4.90±0.15
0.10
A
0.33
-0.08
0.08
A
B
C
3.00±0.10
FRONT VIEW
SIDE VIEW
Document No. 70-0173-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 9 of 11
PE4272
Product Specification
Figure 23. Tape and Reel Specifications
8-lead MSOP
Pin1
Table 7. Ordering Information
Order Code
4272-01
Part Marking
4272
Description
Package
8-lead MSOP
Shipping Method
50 units / Tube
2000 units / T&R
1 / Box
PE4272-08MSOP-50A
PE4272-08MSOP-2000C
PE4272-08MSOP-EK
PE4272G-08MSOP-50A
PE4272G-08MSOP-2000C
4272-02
4272
8-lead MSOP
4272-00
PE4272-EK
4272
Evaluation Kit
4272-51
Green 8-lead MSOP
Green 8-lead MSOP
50 units / Tube
2000 units / T&R
4272-52
4272
©2005 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0173-03 │ UltraCMOS™ RFIC Solutions
Page 10 of 11
PE4272
Product Specification
Sales Offices
The Americas
North Asia Pacific
Peregrine Semiconductor Corporation
Peregrine Semiconductor K.K.
9450 Carroll Park Drive
San Diego, CA 92121
Tel 858-731-9400
5A-5, 5F Imperial Tower
1-1-1 Uchisaiwaicho, Chiyoda-ku
Tokyo 100-0011 Japan
Tel: +81-3-3502-5211
Fax 858-731-9499
Fax: +81-3-3502-5213
Europe
Peregrine Semiconductor, Korea
#B-2402, Kolon Tripolis, #210
Geumgok-dong, Bundang-gu, Seongnam-si
Gyeonggi-do, 463-480 S. Korea
Tel: +82-31-728-4300
Peregrine Semiconductor Europe
Bâtiment Maine
13-15 rue des Quatre Vents
F- 92380 Garches, France
Tel: +33-1-47-41-91-73
Fax : +33-1-47-41-91-73
Fax: +82-31-728-4305
South Asia Pacific
Space and Defense Products
Peregrine Semiconductor, China
Shanghai, 200040, P.R. China
Tel: +86-21-5836-8276
Americas:
Tel: 505-881-0438
Fax: 505-881-0443
Fax: +86-21-5836-7652
Europe, Asia Pacific:
180 Rue Jean de Guiramand
13852 Aix-En-Provence cedex 3, France
Tel: +33(0) 4 4239 3361
Fax: +33(0) 4 4239 7227
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The information in this data sheet is believed to be reliable.
However, Peregrine assumes no liability for the use of this
information. Use shall be entirely at the user’s own risk.
The product is in a formative or design stage. The data
sheet contains design target specifications for product
development. Specifications and features may change in
any manner without notice.
No patent rights or licenses to any circuits described in this
data sheet are implied or granted to any third party.
Preliminary Specification
Peregrine’s products are not designed or intended for use in
devices or systems intended for surgical implant, or in other
applications intended to support or sustain life, or in any
application in which the failure of the Peregrine product could
create a situation in which personal injury or death might occur.
Peregrine assumes no liability for damages, including
consequential or incidental damages, arising out of the use of
its products in such applications.
The data sheet contains preliminary data. Additional data
may be added at a later date. Peregrine reserves the right
to change specifications at any time without notice in order
to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine
decides to change the specifications, Peregrine will notify
customers of the intended changes by issuing a DCN
(Document Change Notice).
The Peregrine name, logo, and UTSi are registered trademarks
and UltraCMOS and HaRP are trademarks of Peregrine
Semiconductor Corp.
Document No. 70-0173-03 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 11 of 11
PE4272-EK 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
PE42720 | PSEMI | UltraCMOS SPDT RF Switch | 获取价格 | |
PE42721 | PSEMI | UltraCMOS SPDT RF Switch | 获取价格 | |
PE42722 | PSEMI | UltraCMOS SPDT RF Switch, 5-1794 MHz | 获取价格 | |
PE42722A-Z | PSEMI | UltraCMOS SPDT RF Switch, 5-1794 MHz | 获取价格 | |
PE42723 | PSEMI | UltraCMOS SPDT RF Switch, 5-1794 MHz | 获取价格 | |
PE42723A-Z | PSEMI | UltraCMOS SPDT RF Switch, 5-1794 MHz | 获取价格 | |
PE42724 | PSEMI | SPDT RF Switch, 5â1794 MHz | 获取价格 | |
PE42724A-Z | PSEMI | SPDT RF Switch, 5â1794 MHz | 获取价格 | |
PE4273 | PSEMI | SPDT Broadband UltraCMOS⑩ DC - 3 GHz RF Switch | 获取价格 | |
PE4273 | PASTERNACK | 75 Ohm SMB Jack Connector Clamp/Solder Attachment For RG180, RG195 | 获取价格 |
PE4272-EK 相关文章
- 2024-10-31
- 6
- 2024-10-31
- 6
- 2024-10-31
- 7
- 2024-10-31
- 8