PE4314_V01 [PSEMI]
UltraCMOS® RF Digital Step Attenuator, 1 MHzâ2.5 GHz;
| 型号： | PE4314_V01 |
| 厂家： | 
Peregrine Semiconductor |
| 描述： | UltraCMOS® RF Digital Step Attenuator, 1 MHzâ2.5 GHz |
| 文件： | 总27页 (文件大小：727K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PE4314
Document Category: Product Specification
UltraCMOS® RF Digital Step Attenuator, 1 MHz–2.5 GHz
Features
• Attenuation step of 0.5 dB up to 31.5 dB
Figure 1 • PE4314 Functional Diagram
• Glitch-less attenuation state transitions
Switched Attenuator Array
RF
RF
• Low distortion for CATV and multi-carrier applica-
tions
Input
Output
• Extended +105 °C operating temperature
• Parallel and Serial programming interfaces
• Packaging – 20-lead 4 × 4 × 0.85 mm QFN
Applications
• DOCSIS 3.1/0 customer premises equipment
(CPE) and infrastructure
Parallel
Control
6-bit
• Satellite CPE and infrastructure
• Fiber CPE and infrastructure
Serial
Control Logic Interface
Control
3-bit
Power-up
Control
2-bit
P/S
VSS_EXT
(optional)
Product Description
The PE4314 is a 75Ω HaRP™ technology-enhanced, 6-bit RF digital step attenuator (DSA) that supports a
frequency range from 1 MHz to 2.5 GHz. It features glitch-less attenuation state transitions and supports 1.8V
control voltage and an extended operating temperature range up to +105 °C, making this device ideal for
multiple wired broadband applications.
The PE4314 is a pin-compatible upgraded version of the PE4304, PE4307, PE4308 and PE43404. An
integrated digital control interface supports both Serial and Parallel programming of the attenuation, including
the capability to program an initial attenuation state at power up.
The PE4314 covers a 31.5 dB attenuation range in a 0.5 dB step. It is capable of maintaining 0.5 dB monoto-
nicity through 2.5 GHz. In addition, no external blocking capacitors are required if 0 VDC is present on the RF
ports.
The PE4314 is manufactured on Peregrine’s UltraCMOS® process, a patented variation of silicon-on-insulator
(SOI) technology on a sapphire substrate.
©2015–2016, Peregrine Semiconductor Corporation. All rights reserved. • Headquarters: 9380 Carroll Park Drive, San Diego, CA, 92121
Product Specification
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Peregrine’s HaRP technology enhancements deliver high linearity and excellent harmonics performance. It is an
innovative feature of the UltraCMOS process, offering the performance of GaAs with the economy and
integration of conventional CMOS.
Optional External VSS
For proper operation, the VSS_EXT pin must be grounded or tied to the VSS voltage specified in Table 2. When the
VSS_EXT pin is grounded, FETs in the switch are biased with an internal negative voltage generator. For applica-
tions that require the lowest possible spur performance, VSS_EXT can be applied externally to bypass the internal
negative voltage generator.
Absolute Maximum Ratings
Exceeding absolute maximum ratings listed in Table 1 may cause permanent damage. Operation should be
restricted to the limits in Table 2. Operation between operating range maximum and absolute maximum for
extended periods may reduce reliability.
ESD Precautions
When handling this UltraCMOS device, observe the same precautions as with any other ESD-sensitive devices.
Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to
avoid exceeding the rating specified in Table 1.
Latch-up Immunity
Unlike conventional CMOS devices, UltraCMOS devices are immune to latch-up.
Table 1 • Absolute Maximum Ratings for PE4314
Parameter/Condition
Supply voltage, VDD
Min
Max
Unit
–0.3
–0.3
5.5
3.6
V
V
Digital input voltage
RF input power, 75Ω
1–30 MHz
See Fig. 5
dBm
dBm
≥30 MHz–2.5 GHz
+30
Storage temperature range
ESD voltage HBM(1), all pins
ESD voltage CDM(2), all pins
–65
+150
1500
1000
°C
V
V
Notes:
1) Human body model (MIL-STD 883 Method 3015).
2) Charged device model (JEDEC JESD22-C101).
Page 2
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Recommended Operating Conditions
Table 2 lists the recommended operating conditions for the PE4314. Devices should not be operated outside the
recommended operating conditions listed below.
Table 2 • Recommended Operating Conditions for PE4314
Parameter
Min
Typ
Max
Unit
Normal mode, VSS_EXT = 0V(1)
Supply voltage, VDD
2.3
3.3
5.5
V
Supply current, IDD
130
200
µA
Bypass mode, VSS_EXT = –3.4V(2)
Supply voltage, VDD (Table 3 spec compliance applies for VDD ≥ 3.4V.)
Supply current, IDD
2.7
3.4
50
5.5
80
V
µA
V
Negative supply voltage, VSS_EXT
–3.6
–40
–3.2
Negative supply current, ISS
–16
µA
Normal or bypass mode
Digital input high
1.17
–0.3
3.6
0.6
20
V
V
Digital input low
Digital input current(3)
µA
RF input power, CW(4)
1–30 MHz
Fig. 5
dBm
dBm
+24
≥30 MHz–2.5 GHz
RF input power, pulsed(5)
1–30 MHz
Fig. 5
dBm
dBm
+27
≥30 MHz–2.5 GHz
Operating temperature range
–40
+25
+105
°C
Notes:
1) Normal mode: connect V
(pin 12) to GND (V
= 0V) to enable internal negative voltage generator.
SS_EXT
SS_EXT
(pin 12) to bypass and disable internal negative voltage generator.
2) Bypass mode: use V
SS_EXT
3) Applies to all pins except pins 1, 5, 7 and 20. Pins 1, 7 and 20 have an internal 1 MΩ pull-down resistor to ground and pin 5 has an internal 2 MΩ
pull-up resistor to internal V
.
DD
4) 100% duty cycle, all bands, 75Ω.
5) Pulsed, 5% duty cycle of 4620 µs period, 75Ω.
DOC-81718-1 – (02/2017)
Page 3
www.psemi.com
PE4314
RF Digital Step Attenuator
Electrical Specifications
Table 3 provides the PE4314 key electrical specifications @ +25 °C, ZS = ZL = 75Ω, unless otherwise specified.
Normal mode(1) is @ VDD = 3.3V and VSS_EXT = 0V. Bypass mode(2) is @ VDD = 3.4V and VSS_EXT = –3.4V.
Table 3 • PE4314 Electrical Specifications
Parameter
Condition
Frequency
Min
Typ
Max
Unit
As
shown
Operating frequency
Attenuation range
1 MHz
2.5 GHz
0.5 dB step
0–31.5
dB
1–204 MHz
204–870 MHz
870–1218 MHz
1218–2500 MHz
1.0
1.2
1.3
1.5
1.25
1.50
1.80
1.90
dB
dB
dB
dB
Insertion loss
Reference state
±(0.15 + 2% of
attenuation setting)
1–204 MHz
dB
dB
dB
dB
±(0.15 + 3% of
attenuation setting)
204–1218 MHz
1218–1794 MHz
1794–2500 MHz
See Fig. 13–
Attenuation error
Any bit or bit combination
Fig. 17
±(0.15 + 4% of
attenuation setting)
± (0.15 + 8% of
attenuation setting)
1–204 MHz
204–870 MHz
870–1794 MHz
1794–2500 MHz
19
17
16
19
dB
dB
dB
dB
Input and output ports, refer-
ence state
Return loss
870 MHz
1000 MHz
1218 MHz
9
deg
deg
deg
Relative phase
All states
11
14
Input 0.1dB compression
point(3)
30–2500 MHz
30
dBm
0 dB
31.5 dB
5 MHz
10 MHz
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
70
76
100
101
104
105
110
113
102
99
Two tones at +15 dBm
10 kHz spacing
17 MHz
80
Input IP2
35 MHz
88
0 dB and 31.5 dB attenua-
tion states
500 MHz
1000 MHz
1900 MHz
2500 MHz
104
106
98
110
Page 4
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Table 3 • PE4314 Electrical Specifications (Cont.)
Parameter
Condition
Frequency
Min
Typ
Max
Unit
0 dB
31.5 dB
5 MHz
10 MHz
dBm
dBm
dBm
dBm
dBm
dBm
dBm
dBm
57
69
63
62
62
59
60
58
62
61
62
61
62
55
55
57
Two tones at +15 dBm
10 kHz spacing
17 MHz
Input IP3
35 MHz
0 dB and 31.5 dB attenua-
tion states
500 MHz
1000 MHz
1900 MHz
2500 MHz
mVPP
µs
Video feed-through
Settling time
DC measurement
7
50% CTRL to 0.05 dB of
final value
1.8
50% CTRL to 0.5 dB of final
value
Settling time
0.4
370
0.5
µs
ns
dB
50% CTRL to 90% or 10%
RF
Switching time
700
Attenuation transient
(envelope)
250 MHz
Notes:
1) Normal mode: connect V
(pin 12) to GND (V
= 0V) to enable internal negative voltage generator.
SS_EXT
SS_EXT
2) Bypass mode: use V
(pin 12) to bypass and disable internal negative voltage generator.
SS_EXT
3) The input 0.1dB compression point is a linearity figure of merit. Refer to Table 2 for the operating RF input power (75Ω).
DOC-81718-1 – (02/2017)
Page 5
www.psemi.com
PE4314
RF Digital Step Attenuator
Switching Frequency
Table 4 • Thermal Data for PE4314
The PE4314 has a maximum 25 kHz switching
frequency in normal mode (pin 12 tied to ground). A
faster switching frequency is available in bypass
mode (pin 12 tied to VSS_EXT). The rate at which the
PE4314 can be switched is then limited to the
switching time as specified in Table 3.
Parameter
Typ Unit
Maximum junction temperature, TJMAX
124
°C
(RF input power, CW = 24 dBm, +105 °C ambient)
25
74
°C/W
°C/W
JT
Switching frequency is defined to be the speed at
which the DSA can be toggled across attenuation
states. Switching time is the time duration between
the point the control signal reached 50% of the final
value and the point the output signal reaches within
10% or 90% of its target value.
θJA, junction-to-ambient thermal resistance
Truth Tables
Table 5 and Table 6 provide the truth tables for the
PE4314.
Spur-Free Performance
Table 5 • Parallel Truth Table for PE4314(*)
The typical spurious performance of the PE4314 in
normal mode is –158 dBm/Hz (pin 12 tied to ground).
The spur fundamental occurs around 2.6 MHz and it
has a bandwidth of 100 kHz. This results in a CATV
band typical spurious level for frequencies above
5 MHz of –154 dBm. If spur-free performance is
desired, the internal negative voltage generator can
be disabled by applying a negative voltage to VSS_EXT
(pin 12).
Attenuation
P/S C16 C8 C4 C2 C1 C0.5
Setting
RF1–RF2
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
1
0
1
0
0
0
0
1
0
0
1
0
0
0
1
0
0
0
1
0
0
1
0
0
0
0
1
0
1
0
0
0
0
0
1
Reference IL
0.5 dB
1 dB
2 dB
Glitch-less Attenuation State Transitions
4 dB
The PE4314 features a novel architecture to provide
the best-in-class glitch-less transition behavior when
changing attenuation states. When RF input power is
applied, the output power spikes are greatly reduced
(0.5 dB) during attenuation state changes when
comparing to previous generations of DSAs.
8 dB
16 dB
31.5 dB
Note: * Not all 64 possible combinations of C0.5–C16 are shown.
Thermal Data
Psi-JT (JT), junction top-of-package, is a thermal
metric to estimate junction temperature of a device on
the customer application PCB (JEDEC JESD51-2).
Table 6 • Parallel Power-up Truth Table for PE4314(*)
Attenuation Setting
P/S
LE PUP1 PUP2
RF1–RF2
0
0
0
0
0
0
0
0
0
1
0
0
1
1
X
0
1
0
1
X
Reference IL
8 dB
JT = (TJ – TT)/P
where
16 dB
JT = junction-to-top of package characterization
parameter, °C/W
31.5 dB
TJ = die junction temperature, °C
Defined by C0.5–C16
TT = package temperature (top surface, in the
center), °C
Note: * Power up with LE = 1 provides normal parallel operation with
C0.5–C16, and PUP1 and PUP2 are not active.
P = power dissipated by device, Watts
Page 6
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
new data into the DSA. The Serial timing for the
operation is defined by Figure 2 and Table 7.
Programming Options
Parallel/Serial Selection
Power-up Control Settings
Either a Parallel or Serial interface can be used to
control the PE4314. The P/S bit provides this
selection, with P/S = LOW selecting the Parallel
interface and P/S = HIGH selecting the Serial
interface.
The PE4314 always assumes a specifiable attenu-
ation setting on power up. This feature exists for both
the Serial and Parallel modes of operation, and allows
a known attenuation state to be established before an
initial Serial or Parallel control word is provided.
Parallel Mode Interface
The Parallel interface consists of six CMOS-
compatible control lines that select the desired attenu-
ation state, as shown in Table 5.
When the attenuator powers up in Serial mode
(P/S = 1), the six control bits are set to whatever data
is present on the six Parallel data inputs (C0.5–C16).
This allows any one of the 64 attenuation settings to
be specified as the power-up state.
The Parallel interface timing requirements are defined
by Figure 3, Table 8 and switching time in Table 3.
When the attenuator powers up in Parallel mode
(P/S = 0) with LE = 0, the control bits are automati-
cally set to one of four possible values. These four
values are selected by the two power-up (PUP)
control bits, PUP1 and PUP2, as shown in Table 6.
For Latched Parallel programming, the latched enable
(LE) should be held LOW while changing attenuation
state control values, then pulsed LE HIGH to LOW
(per Figure 3) to latch new attenuation state into the
device.
Figure 2 • Serial Interface Timing Diagram
For Direct Parallel programming, the LE line should
be pulled HIGH. Changing attenuation state control
values will change device state to new attenuation.
Direct mode is ideal for manual control of the device
(using hardwire, switches or jumpers).
LE
Clock
In Parallel mode, DATA and CLOCK (CLK) pins are
“don’t care” and may be tied to logic LOW or logic
HIGH.
Data
MSB
LSB
tLESUP
tSDSUP
tSDHLD
Serial Interface
tLEPW
The Serial interface is a 6-bit Serial-in, Parallel-out
shift register buffered by a transparent latch. It is
controlled by using three CMOS-compatible signals:
DATA, CLK and LE. The DATA and CLK inputs allow
data to be serially entered into the shift register, a
process that is independent of the state of the LE
input. Serial data is clocked in MSB first.
Figure 3 • Parallel Interface Timing Diagram
LE
The LE input controls the latch. When LE is HIGH, the
latch is transparent and the contents of the Serial shift
register control the attenuator. When LE is brought
LOW, data in the shift register is latched.
Parallel Data
C16:C0.5
The shift register must be loaded while LE is held
LOW to prevent the attenuator value from changing
as data is entered. The LE input should then be
toggled HIGH and brought LOW again, latching the
tPDSUP
tLEPW
tPDHLD
DOC-81718-1 – (02/2017)
Page 7
www.psemi.com
PE4314
RF Digital Step Attenuator
Serial Register Map
Figure 4 provides the Serial programming register map for the PE4314.
Figure 4 • Serial Register Map(*)
MSB (first in)
LSB (last in)
B5
B4
C8
B3
C4
B2
C2
B1
C1
B0
C16
C0.5
Note: * For backward compatibility, the same programming scheme
can be used.
Table 7 • Serial Interface AC Characteristics(1)
Parameter
Min
Max
Unit
(2)
10
MHz
ns
Serial data clock frequency, fCLK
Serial clock HIGH time, tCLKH
30
30
10
30
10
10
Serial clock LOW time, tCLKL
ns
LE set-up time after last clock rising edge, tLESUP
LE minimum pulse width, tLEPW
ns
ns
Serial data set-up time before clock rising edge, tSDSUP
Serial data hold time after clock rising edge, tSDHLD
Notes:
ns
ns
1) V
2) f
= 3.3V or 5.0V, –40 °C < T < +105 °C, unless otherwise specified.
A
DD
is verified during the functional pattern test. Serial programming sections of the functional pattern are clocked at 10 MHz to verify f
CLK
CLK
specification.
Table 8 • Parallel Interface AC Characteristics(*)
Parameter
LE minimum pulse width, tLEPW
Min
Max
Unit
10
10
10
ns
ns
ns
Data set-up time before rising edge of LE, tPDSUP
Data hold time after falling edge of LE, tPDHLD
Note: * V
= 3.3V or 5.0V, –40 °C < T < +105 °C, unless otherwise specified.
A
DD
Page 8
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 5 • Power De-rating Curve, 1 MHz–2.5 GHz, –40 to +105 °C Ambient, 75Ω
P0.1 dB Compression (≥ 30 MHz)
CW & Pulsed (< 30 MHz)
Pulsed (≥ 30 MHz)
CW (≥ 30 MHz)
32
30
28
26
24
22
20
18
16
14
12
10
8
6
4
1.0
10.0
100.0
1000.0
Frequency (MHz)
DOC-81718-1 – (02/2017)
Page 9
www.psemi.com
PE4314
RF Digital Step Attenuator
Typical Performance Data
Figure 6–Figure 27 show the typical performance data at +25 °C, VDD = 3.3V, ZS = ZL = 75Ω, unless otherwise
specified.
Figure 6 • Insertion Loss vs Temperature
-40°C
+25°C
+85°C
+105°C
0
-1
-2
-3
-4
-5
-6
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Page 10
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 7 • Input Return Loss vs Attenuation Setting
0 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
0
-10
-20
-30
-40
-50
-60
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Figure 8 • Output Return Loss vs Attenuation Setting
0 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
0
-10
-20
-30
-40
-50
-60
-70
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
DOC-81718-1 – (02/2017)
Page 11
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 9 • Input Return Loss for 16 dB Attenuation Setting vs Temperature
-40°C
+25°C
+85°C
+105°C
0
-10
-20
-30
-40
-50
-60
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Figure 10 • Output Return Loss for 16 dB Attenuation Setting vs Temperature
-40°C
+25°C
+85°C
+105°C
0
-10
-20
-30
-40
-50
-60
-70
0
0.5
1
1.5
2
2.5
3
Frequency (GHz)
Page 12
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 11 • Relative Phase Error vs Attenuation Setting
0 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
30
25
20
15
10
5
0
-5
-10
0
0.5
1
1.5
2
2.5
Frequency (GHz)
Figure 12 • Relative Phase Error for 31.5 dB Attenuation Setting vs Frequency
0.2 GHz
0.9 GHz
1.8 GHz
2.5 GHz
18
16
14
12
10
8
6
4
2
0
-40
25
85
105
Temperature (°C)
DOC-81718-1 – (02/2017)
Page 13
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 13 • Attenuation Error @ 200 MHz vs Temperature(*)
-40°C
+25°C
+85°C
+105°C
Upper Atten. Error Limit
Lower Atten. Error Limit
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1
0
4
8
12
16
20
24
28
32
Attenuation Setting (dB)
Note: * Attenuation error limit @ ±(0.15 + 2% of attenuation setting).
Figure 14 • Attenuation Error @870 MHz vs Temperature(*)
-40°C
+25°C
+85°C
+105°C
Upper Atten. Error Limit
Lower Atten. Error Limit
1.5
1
0.5
0
-0.5
-1
-1.5
0
4
8
12
16
20
24
28
32
Attenuation Setting (dB)
Note: * Attenuation error limit @ ±(0.15 + 3% of attenuation setting).
Page 14
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 15 • Attenuation Error @ 1218 MHz vs Temperature(*)
-40°C
+25°C
+85°C
+105°C
Upper Atten. Error Limit
Lower Atten. Error Limit
1.5
1
0.5
0
-0.5
-1
-1.5
0
4
8
12
16
20
24
28
32
Attenuation Setting (dB)
Note: * Attenuation error limit @ ±(0.15 + 3% of attenuation setting).
Figure 16 • Attenuation Error @ 1790 MHz vs Temperature(*)
-40°C
+25°C
+85°C
+105°C
Upper Atten. Error Limit
Lower Atten. Error Limit
1.5
1
0.5
0
-0.5
-1
-1.5
0
4
8
12
16
20
24
28
32
Attenuation Setting (dB)
Note: * Attenuation error limit @ ±(0.15 + 4% of attenuation setting).
DOC-81718-1 – (02/2017)
Page 15
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 17 • Attenuation Error @ 2500 MHz vs Temperature(*)
-40°C
+25°C
+85°C
+105°C
Upper Atten. Error Limit
Lower Atten. Error Limit
3
2
1
0
-1
-2
-3
0
4
8
12
16
20
24
28
32
Attenuation Setting (dB)
Note: * Attenuation error limit @ ±(0.15 + 8% of attenuation setting).
Figure 18 • IIP3 vs Attenuation Setting (Low Frequencies)
0 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
75.00
70.00
65.00
60.00
55.00
5
10
17
35
Frequency (MHz)
Page 16
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 19 • IIP3 vs Attenuation Setting (High Frequencies)
0 dB
0.5 dB
1 dB
2 dB
3.5 dB
31.5 dB
70.00
65.00
60.00
55.00
50.00
500
1000
1900
2500
Frequency (MHz)
Figure 20 • IIP2 vs Attenuation Setting (Low Frequencies)
0 dB
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
110.00
105.00
100.00
95.00
90.00
85.00
80.00
75.00
70.00
65.00
5
10
17
35
Frequency (MHz)
DOC-81718-1 – (02/2017)
Page 17
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 21 • IIP2 vs Attenuation Setting (High Frequencies)
0 dB
0.5 dB
1 dB
2 dB
3.5 dB
31.5 dB
120.00
115.00
110.00
105.00
100.00
95.00
90.00
500
1000
1900
2500
Frequency (MHz)
Figure 22 • 0.5 dB Step Error vs Frequency(*)
200 MHz
870 MHz
1218 MHz
1790 MHz
2500 MHz
0.5
0.4
0.3
0.2
0.1
0
-0.1
-0.2
-0.3
-0.4
-0.5
0
4
8
12
16
20
24
28
32
Attenuation Setting (dB)
Note: * Monotonicity is held so long as step error does not cross below –0.5 dB.
Page 18
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 23 • 0.5 dB Step, Actual vs Frequency
200 MHz
870 MHz
1218 MHz
1790 MHz
2500 MHz
32
28
24
20
16
12
8
4
0
0
4
8
12
16
20
24
28
32
Ideal Attenuation (dB)
Figure 24 • 0.5 dB Major State Bit Error vs Attenuation Setting
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
1
0.5
0
-0.5
-1
-1.5
-2
-2.5
-3
0
0.5
1
1.5
2
2.5
Frequency (GHz)
DOC-81718-1 – (02/2017)
Page 19
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 25 • 0.5 dB Attenuation Error vs Frequency
200 MHz
870 MHz
1218 MHz
1790 MHz
2500 MHz
1
0.5
0
-0.5
-1
-1.5
-2
0
4
8
12
16
20
24
28
32
Attenuation Setting (dB)
Figure 26 • Attenuation Transient (15.5–16 dB), Typical Switching Time = 370 ns
Power (dBm)
-12
Trigger
starts ~
4230 ns
-12.4
-12.8
-13.2
-13.6
-14
Glitch =
0.28 dB
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
Time (ns)
Page 20
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 27 • Attenuation Transient (16–15.5 dB), Typical Switching Time = 370 ns
Power (dBm)
-12
Glitch =
0.05 dB
Trigger
starts ~
4230 ns
-12.4
-12.8
-13.2
-13.6
-14
0
1000
2000
3000
4000
5000
6000
7000
8000
9000
Time (ns)
DOC-81718-1 – (02/2017)
Page 21
www.psemi.com
PE4314
RF Digital Step Attenuator
Latched Parallel Programming Procedure
Evaluation Kit
For automated Latched Parallel programming,
connect the USB dongle board and cable that is
provided with the evaluation kit (EVK) from the USB
port of the PC to the J1 header of the PE4314 EVB,
and set the LE and D1–D6 SP3T switches to the
EXTERNAL position. Position the Parallel/Serial (P/S)
select switch to the Parallel position. The evaluation
software is written to operate the DSA in Parallel
mode. Ensure that the software GUI is set to Latched
Parallel mode. Use the software GUI to enable the
desired attenuation state. The software GUI automati-
cally programs the DSA each time an attenuation
state is enabled.
The digital step attenuator evaluation board (EVB)
was designed to ease customer evaluation of the
PE4314 digital step attenuator. The PE4314 EVB
supports Direct Parallel, Latched Parallel and Serial
modes.
Evaluation Kit Setup
Connect the EVB with the USB dongle board and USB
cable as shown in Figure 28.
Direct Parallel Programming Procedure
Direct Parallel programming is suitable for manual
operation without software programming. For manual
Direct Parallel programming, position the Parallel/
Serial (P/S) select switch to the Parallel position. The
LE switch must be switched to HIGH position.
Switches D1–D6 are SP3T switches that enable the
user to manually program the parallel bits. When D1–
D6 are toggled to the HIGH position, logic high is
presented to the parallel input. When toggled to the
LOW position, logic low is presented to the parallel
input. Setting LE and D1–D6 to the EXTERNAL
position presents as OPEN, which is set for software
programming of Latched Parallel and Serial modes.
Table 5 depicts the Parallel truth table.
Serial Programming Procedure
For automated Serial programming, connect the USB
dongle board and cable that is provided with the EVK
from the USB port of the PC to the J1 header of the
PE4314 EVB, and set the LE and D1–D6 SP3T
switches to the EXTERNAL position. Position the
Parallel/Serial (P/S) select switch to the Serial
position. The software GUI is written to operate the
DSA in Serial mode. Use the software GUI to enable
each setting to the desired attenuation state. The
software GUI automatically programs the DSA each
time an attenuation state is enabled.
Figure 28 • Evaluation Kit for PE4314
Page 22
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Figure 29 • Evaluation Kit Layout for PE4314
DOC-81718-1 – (02/2017)
Page 23
www.psemi.com
PE4314
RF Digital Step Attenuator
Pin Information
Table 9 • Pin Descriptions for PE4314
This section provides pinout information for the
PE4314. Figure 30 shows the pin map of this device
for the available package. Table 9 provides a
description for each pin.
Pin
Name
Pin No.
Description
C16(1)(2)
1
Parallel control bit, 16 dB
RF1(3)
DATA
CLK
Figure 30 • Pin Configuration (Top View)
2
3
4
5
RF1 port
Serial interface data input
Serial interface clock input
Serial interface latch enable input
Pin 1 Dot
Marking
LE(4)
VDD
6, 9
Supply voltage
PUP1(1)(2)
1
2
3
4
5
15
14
13
12
C16
RF1
DATA
CLK
LE
C8
7
Power-up control bit, MSB
Power-up control bit, LSB
Ground
PUP2(1)
GND
RF2
P/S
8
10, 11, 18
12
Exposed
Ground Pad
(5)
VSS_EXT
External VSS negative control voltage
VSS_EXT
11 GND
13
P/S
RF2(3)
C8(1)
Parallel/Serial mode select
RF2 port
14
15
Parallel control bit, 8 dB
Parallel control bit, 4 dB
Parallel control bit, 2 dB
Parallel control bit, 1 dB
Parallel control bit, 0.5 dB
C4(1)
16
C2(1)
17
C1(1)
19
C0.5(1)(2)
20
Exposed pad: ground for proper oper-
ation
Pad
GND
Notes:
1) Ground PUP1, PUP2, C0.5, C1, C2, C4, C8 and C16 if not in use.
2) C0.5, C16 and PUP1 have an internal 1 MΩ pull-down resistor to
ground.
3) RF pins 2 and 14 must be at 0 VDC. The RF pins do not require
DC blocking capacitors for proper operation if the 0 VDC require-
ment is met.
4) LE (pin 5) has an internal 2 MΩ pull-up resistor to internal V
.
DD
(pin 12) to bypass and disable internal negative
5) Use V
SS_EXT
voltage generator. Connect V
(pin 12) to GND (V
=
SS_EXT
0V) to enable internal negative voltage generator.
SS_EXT
Page 24
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Packaging Information
This section provides packaging data including the moisture sensitivity level, package drawing, package
marking and tape-and-reel information.
Moisture Sensitivity Level
The moisture sensitivity level rating for the PE4314 in the 20-lead 4 × 4 × 0.85 mm QFN package is MSL1.
Package Drawing
Figure 31 • Package Mechanical Drawing for 20-lead 4 × 4 × 0.85 mm QFN
0.10
(2X)
C
A
4.00
2.15 0.05
0.28
(x20)
0.50
0.55 0.05
(x20)
B
11
15
0.75
(x20)
0.50
10
16
20
2.15 0.05
2.20
4.40
4.00
6
0.23 0.05
(x20)
0.10
(2X)
C
5
1
0.18
0.18
2.20
4.40
2.00
Pin #1 Corner
0.435 SQ
REF
TOP VIEW
BOTTOM VIEW
RECOMMENDED LAND PATTERN
0.10
0.05
C
C
0.10
0.05
C
C
A B
0.85 0.05
ALL FEATURES
SEATING PLANE
C
0.203
0.05
SIDE VIEW
Top-Marking Specification
Figure 32 • Package Marking Specifications for PE4314
4314
=
Pin 1 indicator
YY = Last two digits of assembly year
WW = Assembly work week
ZZZZZZ = Assembly lot code (maximum six characters)
YYWW
ZZZZZZ
DOC-81718-1 – (02/2017)
Page 25
www.psemi.com
PE4314
RF Digital Step Attenuator
Tape and Reel Specification
Figure 33 • Tape and Reel Specifications for 20-lead 4 × 4 × 0.85 mm QFN
Direction of Feed
Section A-A
P1
P0
see
D0
D1
P2
T
A
A
see note 3
note 1
E
F
see note 3
B0
K0
A0
W0
Notes:
1. 10 Sprocket hole pitch cumulative tolerance 0.2
2. Camber in compliance with EIA 481
3. Pocket position relative to sprocket hole measured
as true position of pocket, not pocket hole
A0
B0
K0
4.35
4.35
1.10
Pin 1
D0
D1
E
1.50 + 0.10/ -0.00
1.50 min
1.75 0.10
5.50 0.05
4.00
F
P0
P1
P2
T
8.00
2.00 0.05
0.30 0.05
12.00 0.30
W0
Device Orientation in Tape
Page 26
DOC-81718-1 – (02/2017)
www.psemi.com
PE4314
RF Digital Step Attenuator
Ordering Information
Table 10 lists the available ordering codes for the PE4314 as well as available shipping methods.
Table 10 • Order Codes for PE4314
Order Codes
Description
Packaging
Shipping Method
PE4314B–Z
EK4314–02
PE4314 digital step attenuator
PE4314 evaluation kit
Green 20-lead 4 × 4 mm QFN
Evaluation kit
3000 Units/T&R
1/Box
Document Categories
Advance Information
The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and
features may change in any manner without notice.
Preliminary Specification
The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any
time without notice in order to supply the best possible product.
Product Specification
The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended
changes by issuing a CNF (Customer Notification Form).
Sales Contact
For additional information, contact Sales at sales@psemi.com.
Disclaimers
The information in this document is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be
entirely at the user’s own risk. No patent rights or licenses to any circuits described in this document are implied or granted to any third party.
Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to
support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death
might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in
such applications.
Patent Statement
Peregrine products are protected under one or more of the following U.S. patents: patents.psemi.com
Copyright and Trademark
©2015–2016, Peregrine Semiconductor Corporation. All rights reserved. The Peregrine name, logo, UTSi and UltraCMOS are registered trade-
marks and HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp.
Product Specification
www.psemi.com
DOC-81718-1 – (02/2017)
相关型号：
PE4315
SHV Jack Bulkhead Connector Clamp/Solder Attachment For RG59, RG62, .480 inch D Hole
PASTERNACK
©2020 ICPDF网 联系我们和版权申明