PE95420-11 [PSEMI]
RF SPDT Switch Hermetically sealed ceramic package DC - 8500 MHz; RF SPDT开关密封陶瓷封装的DC - 8500 MHz的
| 型号： | PE95420-11 |
| 厂家： | 
Peregrine Semiconductor |
| 描述： | RF SPDT Switch Hermetically sealed ceramic package DC - 8500 MHz |
| 文件： | 总7页 (文件大小：425K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Preliminary Specification
PE95420
RF SPDT Switch
Hermetically sealed ceramic package
DC – 8500 MHz
Product Description
The PE95420 is an RF SPDT (single pole double throw) switch
and is available in a hermetically sealed ceramic package. The
PE95420 is designed to cover a broad range of applications
from near DC to 8500 MHz for use in various Hi-Rel industries
and applications requiring broadband performance. It uses
Peregrine’s UltraCMOS™ process and features HaRP™
technology enhancements to deliver high linearity and
exceptional harmonics performance. HaRP technology is an
innovative feature of the UltraCMOS™ process providing
upgraded linearity performance.
Features
•
HaRP™-Technology-Enhanced
• Eliminates Gate and Phase Lag
• No insertion loss or phase drift
•
•
High linearity 60 dBm IIP3
Low insertion loss:
• 0.8 dB at 100 MHz
• 1.4 dB at 3000 MHz
• 1.5 dB at 6000 MHz
•
High isolation
• 65 dB at 100 MHz
• 42 dB at 3000 MHz
• 40 dB at 6000 MHz
The PE95420 is an absorptive/non-reflective switch design
which is an ideal termination method for RF elements in a
system design. A single-pin 2.2V CMOS logic control in a
single chip solution reduces the number of control lines.
•
•
•
•
•
1 dB compression point of +30 dBm
Single-pin 3.3 V CMOS logic control
ESD tolerant to 2000 V HBM
Absorptive/Non-Reflective
Offered in a 7-lead Hermetic CSOIC
Surface-Mount Package and in DIE form
Typical Industries
•
•
•
•
•
•
•
Medical
Automotive
Telecom Infrastructure
Test Instrumentation
Down-hole oil/gas
Military
Screening available for commercial
space applications
Figure 2. Package Type
7-lead CSOIC
Figure 1. Functional Diagram
RFC
RF1
RF2
ESD
ESD
50Ω
50Ω
CMOS Control
Driver
VDD LS CTRL VSS
Document No. 70-0259-02 │ www.psemi.com
©2008 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 7
PE95420
Preliminary Specification
Table 1. Electrical Specifications @ +25°C, VDD = 3.3 V
Parameter
Conditions
Min
Typical
Max
Units
Operation Frequency
DC
8500
MHz
100 MHz, 0 dBm
0.8
1.2
1.5
1.7
82
48
35
30
74
46
42
33
20
21
16
9
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
3000 MHz, 0 dBm
6000 MHz, 0 dBm
8500 MHz, 0 dBm
100 MHz
3000 MHz
6000 MHz
8500 MHz
100 MHz
3000 MHz
6000 MHz
8500 MHz
100 MHz
3000 MHz
6000 MHz
8500 MHz
100 MHz
Insertion Loss
Isolation – RF1 to RF2
Isolation - RFC to RF1/RF2
Return Loss ON State
Return Loss OFF State
19
18
15
10
3000 MHz
6000 MHz
8500 MHz
Switching Time
Input 1 dB Compression
Input IP3
50% CTRL to 0.1 dB final value
6000 MHz
2
µs
33
60
dBm
dBm
6000 MHz
Figure 3. Pin Layout (Top View)
Table 2. Pin Descriptions
Pin No. Pin Name
Description
RFC
1
2
3
RFC1
RF11
VDD
RF Common
RF Port 1
Pin 1
Nominal 3.3 V supply connection
Selects the RF1 to RFC path
(See Table 5)
4
5
LS
Selects the RF2 to RFC path
(See Table 5)
Negative power supply. Apply nominal –
3.3 V supply
CTRL
VSS
Pin 2
RF1
Pin 7
RF2
6
7
1
RF Port 2
RF2
Pin 3
4
5
6
VDD LS CTRL VSS
Note 1: No DC voltage should be applied at RF ports.
©2008 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0259-02 │ UltraCMOS™ RFIC Solutions
Page 2 of 7
PE95420
Preliminary Specification
Table 3. Operating Ranges
Table 5. Truth Table
LS
CTRL
RFC-RF1
RFC-RF2
Parameter
Min
Typ
3.3
Max
3.6
Units
0
0
off
off
VDD Positive Power
Supply Voltage
3.0
V
V
0
1
1
1
0
1
off
on
on
on
off
on
VDD Negative Power
Supply Voltage
IDD Power Supply Current
(VDD = 3.3V, LS or CTRL =
3.3V)
-3.6
-3.3
-3.0
100
µA
Control Voltage High
Control Voltage Low
0.7xVDD
-40
V
V
Exposed Solder Pad Connection
0.3xVDD
85
Operating temperature
range
The exposed solder pad on the bottom of the package
must be grounded for proper device operation.
°C
RF Power In:
20 MHz ≤ 8.5 GHz
24
dBm
Electrostatic Discharge (ESD) Precautions
When handling this UltraCMOS™ device, observe the
same precautions that you would use with other ESD-
sensitive devices. Although this device contains
circuitry to protect it from damage due to ESD,
precautions should be taken to avoid exceeding the
rate specified.
Table 4. Absolute Maximum Ratings
Symbol
Parameter/Conditions
Min
Max
Units
VDD
Power supply voltage
-0.3
4.0
V
VDD
+
0.3
+
0.3
VC1
Voltage on LS input
-0.3
V
VDD
VC2
TST
Voltage on CTRL input
-0.3
-65
V
Latch-Up Avoidance
Storage temperature range
150
°C
Unlike conventional CMOS devices, UltraCMOS™
devices are immune to latch-up.
ESD voltage (Human Body
Model)
VESD
2000
V
Exceeding absolute maximum ratings may cause permanent
damage. Operation should be restricted to the limits in the
Operating Ranges table. Operation between operating
range maximum and absolute maximum for extended
periods may reduce reliability.
Switching Frequency
The PE95420 has a maximum 25 kHz switching rate.
Performance Plots
Figure 4. Isolation, RFC-RF1, VDD=3.3V across
Temperature
Figure 5. Isolation, OFF-State
Document No. 70-0259-02 │ www.psemi.com
©2008 Peregrine Semiconductor Corp. All rights reserved.
Page 3 of 7
PE95420
Preliminary Specification
Figure 6. Insertion Loss
Figure 7. Return Loss, RFC ON
Figure 8. Return Loss, RFC OFF
©2008 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0259-02 │ UltraCMOS™ RFIC Solutions
Page 4 of 7
PE95420
Preliminary Specification
Evaluation Boards
Figure 9. Evaluation Board Layouts
The SPDT switch EK Board was designed to ease
customer evaluation of Peregrine’s PE95420. The RF
common port is connected through a 50 Ω transmission
line via the top SMA connector, J1. RF1 and RF2 are
connected through 50 Ω transmission lines via SMA
connectors J2 and J3, respectively. A through 50 Ω
transmission is available via SMA connectors J5 and
J6. This transmission line can be used to estimate the
loss of the PCB over the environmental conditions
being evaluated.
Peregrine Specification 101-0345
The evaluation kit board is constructed of four metal
layers. The dual clad top RF layer is Rogers RO4003
material with an 8 mil RF core and er = 3.55. The other
two dielectric layers are FR4 for DC control and overall
board strength with an cumulative board thickness of
62 mils. The RF transmission lines were designed
using a Grounded co-planar waveguide with a linewidth
of 15 mils and gap of 7 mils.
Figure 10. Evaluation Kit Schematic
Peregrine Specification 102-0417
2
9
SOCKETMOUNTINGHOLE
SOCKET MOUNTING HOLE
SOCKET MOUNTING HOLE
SOCKETMOUNTINGHOLE
10
11
12
J2
J3
142-0761-881/891
U1
142-0761-881/891
RF1
RF2
1
2
7
8
1
RF1
RF2
PE95420
THERMAL SLUG
GND
J4
HEADER14
VSS
2
4
1
2
1
3
CTR
3
4
VDD
6
5
6
5
LS
8
7
8
7
VDD
10
12
14
9
J5
J6
10
12
14
9
11
13
142-0761-881/891
142-0761-881/891
11
13
Through Line
1
1
R1
DNI
C4
22pF
C3
22pF
C2
22pF
C1
22pF
Document No. 70-0259-02 │ www.psemi.com
©2008 Peregrine Semiconductor Corp. All rights reserved.
Page 5 of 7
PE95420
Preliminary Specification
Figure 11. Package Drawing
7-lead CSOIC
PE95420
NOTES:
1. PACKAGE BODY MATERIAL: WHITE ALUMINA 92%
2. CONDUCTOR TRACES MATERIAL: THICK FILM TUNGSTEN
3. LEAD IS Fe-Ni-Co ALLOY
4. BASE IS Cu-W
5. PLATING: ELECTROLYTIC GOLD 50 MICRO-INCHES MIN, OVER ELECTROLYTIC NICKEL
75 MICRO-INCHES MIN.
6. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]
7. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
Table 6. Ordering Information
Shipping
Method
Order Code
Part Marking
Description
Package
95420-01
95420-11
95420-99
95420-00
9542001
9542011
PE95420-7CSOIC-50B Engineering Samples
PE95420-7CSOIC-50B Production Units
Production Die
7-lead CSOIC
50 Count Trays
50 Count Trays
400 Units/Waffle Pack
1 / Box
7-lead CSOIC
Die
PE95420-EK
PE95420 Evaluation Kit
Evaluation Board
©2008 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0259-02 │ UltraCMOS™ RFIC Solutions
Page 6 of 7
PE95420
Preliminary Specification
Sales Offices
The Americas
Peregrine Semiconductor Corporation
Peregrine Semiconductor, Asia Pacific (APAC)
Shanghai, 200040, P.R. China
Tel: +86-21-5836-8276
Fax: +86-21-5836-7652
9380 Carroll Park Drive
San Diego, CA 92121
Tel: 858-731-9400
Fax: 858-731-9499
Peregrine Semiconductor, Korea
#B-2607, Kolon Tripolis, 210
Geumgok-dong, Bundang-gu, Seongnam-si
Gyeonggi-do, 463-943 South Korea
Tel: +82-31-728-3939
Europe
Peregrine Semiconductor Europe
Bâtiment Maine
Fax: +82-31-728-3940
13-15 rue des Quatre Vents
F-92380 Garches, France
Tel: +33-1-4741-9173
Fax : +33-1-4741-9173
Peregrine Semiconductor K.K., Japan
Teikoku Hotel Tower 10B-6
1-1-1 Uchisaiwai-cho, Chiyoda-ku
Tokyo 100-0011 Japan
Tel: +81-3-3502-5211
Fax: +81-3-3502-5213
Hi-Rel Products
Americas:
Tel: 858-731-9453
Europe, Asia Pacific:
180 Rue Jean de Guiramand
13852 Aix-En-Provence Cedex 3, France
Tel: +33-4-4239-3361
Fax: +33-4-4239-7227
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The information in this data sheet is believed to be reliable.
However, Peregrine assumes no liability for the use of this
information. Use shall be entirely at the user’s own risk.
The product is in a formative or design stage. The data
sheet contains design target specifications for product
development. Specifications and features may change in
any manner without notice.
No patent rights or licenses to any circuits described in this
data sheet are implied or granted to any third party.
Preliminary Specification
Peregrine’s products are not designed or intended for use in
devices or systems intended for surgical implant, or in other
applications intended to support or sustain life, or in any
application in which the failure of the Peregrine product could
create a situation in which personal injury or death might occur.
Peregrine assumes no liability for damages, including
consequential or incidental damages, arising out of the use of
its products in such applications.
The data sheet contains preliminary data. Additional data
may be added at a later date. Peregrine reserves the right
to change specifications at any time without notice in order
to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine
decides to change the specifications, Peregrine will notify
customers of the intended changes by issuing a DCN
(Document Change Notice).
The Peregrine name, logo, and UTSi are registered trademarks
and UltraCMOS and HaRP are trademarks of Peregrine
Semiconductor Corp.
©2008 Peregrine Semiconductor Corp. All rights reserved.
Document No. 70-0259-02 │ UltraCMOS™ RFIC Solutions
Page 7 of 7
相关型号：
©2020 ICPDF网 联系我们和版权申明