ASM3P2814BF-08ST [PULSECORE]
Low Power EMI Reduction IC; 低功耗降低EMI IC型号: | ASM3P2814BF-08ST |
厂家: | PulseCore Semiconductor |
描述: | Low Power EMI Reduction IC |
文件: | 总11页 (文件大小:152K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Low Power EMI Reduction IC
Features
and Center Spread, and percentage deviation range from
±0.625% to -3.5%.
•
•
•
FCC approved method of EMI attenuation
Provides up to 15dB EMI reduction
Generates a 1x, 2x and 4x low EMI spread
spectrum clock of the input frequency
• 1x: ASM3P2811A/B
The ASM3P28XX reduces electromagnetic interference
(EMI) at the clock source, allowing system wide reduction
of EMI of down stream clock and data dependent
signals. The ASM3P28XX allows significant system cost
savings by reducing the number of circuit board layers,
ferrite beads, shielding, and other passive components
that are traditionally required to pass EMI regulations.
• 2x: ASM3P2812A/B
• 4x: ASM3P2814A/B
•
•
•
•
Optimized for input frequency range from
10MHz to 40 MHz
Internal loop filter minimizes external
components and board space
Selectable spread options:
The ASM3P28XX modulates the output of a single PLL in
order to “spread” the bandwidth of a synthesized clock,
and more importantly, decreases the peak amplitudes of
its harmonics. This results in significantly lower system
EMI compared to the typical narrow band signal produced
by oscillators and most frequency generators. Lowering
EMI by increasing a signal’s bandwidth is called ‘spread
spectrum clock generation’.
• Down Spread and Center Spread
8 frequency deviation selections:
• ±0.625% to -3.5%
•
•
•
•
Low inherent Cycle-to-Cycle Jitter
3.3V Operating Voltage
CMOS/TTL compatible inputs and outputs.
Pin-out compatible with Cypress CY25811,
CY25812 and CY25814
The ASM3P28XX uses the most efficient and optimized
modulation profile approved by the FCC and is
implemented in a proprietary all-digital method.
•
•
Commercial and Industrial temperature range
Available in 8-pin SOIC and TSSOP Packages
Applications
Product Description
The ASM3P28XX is targeted towards EMI management
for memory and LVDS interfaces in mobile graphic
chipsets and high-speed digital applications such as PC
peripheral devices, consumer electronics, and embedded
controller systems.
The ASM3P28XX devices are versatile spread spectrum
frequency modulators designed specifically for a wide
range of input clock frequencies from 10MHz to 40MHz.
Refer Input / Output Frequency Range Selection Table.
The ASM3P28XX can generate an EMI reduced clock
from crystal, ceramic resonator, or system clock. The
ASM3P28XX-A and the ASM3P28XX-B offer various
combinations of spread options and percentage
deviations. Refer Frequency Deviation and Spread
Selection Table. These combinations include Down
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Block Diagram
VDD
D_C SRS FRS
PLL
Modulation
XIN /CLKIN
XOUT
Crystal
Oscillator
Frequency
Divider
Output
Divider
Phase
Detector
Loop
Filter
VCO
Feedback
Divide
ModOUT
VSS
Pin Configuration
XIN / CLKIN
VSS
1
8
XOUT
VDD
2
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
7
6
5
D_C
FRS
3
4
SRS
ModOUT
Pin Description
Pin#
Pin Name
Type
Description
1
2
XIN / CLKIN
VSS
I
Crystal connection or external Clock input.
Ground to entire chip.
P
I
Digital logic input used to select Down (LOW) or Center (HIGH) spread options.
(Refer Frequency Deviation and Spread Selection Table).
This pin has an internal pull-up resistor.
3
D_C
Spread range select. Digital logic input used to select frequency deviation
(Refer Frequency Deviation and Spread Selection Table).
This pin has an internal pull-up resistor.
4
5
6
SRS
ModOUT
FRS
I
O
I
Spread spectrum clock output
Frequency range select. Digital logic input used to select Input frequency range
(Refer Input/Output Frequency Range Selection Table).
This pin has an internal pull-up resistor.
7
8
VDD
P
Power supply for the entire chip.
Crystal connection. If using an external reference, this pin must be left
unconnected.
XOUT
O
Low Power EMI Reduction IC
2 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Input/Output Frequency Range Selection Table
Part Number
ASM3P2812 (2x)
FRS (pin 6)
Modulation Rate
ASM3P2811 (1x)
ASM3P2814 (4x)
Input
(MHz)
Output
(MHz)
Input
(MHz)
Output
(MHz)
Input
(MHz)
Output
(MHz)
0
1
10-20
20-40
10-20
20-40
10-20
20-40
20-40
40-80
10-20
20-40
40-80
Input Frequency / 448
Input Frequency / 896
80-160
Output Frequency Deviation and Spread Selection Table
Frequency Deviation* (%)
D_C
(pin 3) (pin 4)
SRS
Part Number
FS=0
FS=1
10/20/40 (MHz) 20/40/80 (MHz) 20/40/80 (MHz) 40/80/160 (MHz)
0
0
-3
-2.5
-2.7
-2.6
0
1
1
0
0
1
1
0
1
0
1
0
-3.7
±1.5
±1.8
-1.7
-3.4
±1.2
±1.6
-1.0
-1.5
±0.6
-3.8
±1.5
±1.9
-1.5
-2.0
±0.8
-3.6
±1.3
±1.8
-1.4
-1.9
±0.7
ASM3P28XXA
-2.0
ASM3P28XXB
±0.75
1
1
±1.0
±0.75
±1.0
±0.9
Note: Frequency Deviation given in the table is for the Output Frequency Range covering ASM3P2811x / 12x / 14x
Absolute Maximum Ratings
Symbol
VDD, VIN
TSTG
Parameter
Voltage on any pin with respect to Ground
Storage temperature
Rating
-0.5 to +4.6
-65 to +125
260
Unit
V
°C
Ts
Max. Soldering Temperature (10 sec)
Junction Temperature
°C
TJ
150
°C
Static Discharge Voltage
TDV
2
KV
(As per JEDEC STD 22- A114-B)
Note: These are stress ratings only and are not implied for functional use. Exposure to absolute maximum ratings for prolonged periods of time may affect
device reliability.
Low Power EMI Reduction IC
3 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Operating Conditions
Symbol
Parameter
Min
3.0
Max
3.6
+85
10
Unit
V
VDD
TA
Voltage on any pin with respect to GND
Operating temperature
Load Capacitance
-40
°C
CL
pF
pF
CIN
Input Capacitance
7
DC Electrical Characteristics
Symbol
Parameter
Min
Typ
Max
Unit
VIL
VIH
Input low voltage
VSS – 0.3
2
0.8
V
V
Input high voltage
Input low current
(Inputs D_C, SRS and FRS are pulled high internally)
VDD + 0.3
IIL
IIH
-50
50
3
µA
µA
Input high current
XOUT Output low current
(VXOL@ 0.4V, VDD = 3.3V)
XOUT Output high current
(VXOH@ 2.5V, VDD = 3.3V)
IXOL
mA
IXOH
3
mA
VOL
VOH
ICC
Output low voltage (VDD = 3.3V, IOL = 5mA)
Output high voltage (VDD = 3.3V, IOH = -5mA)
Dynamic supply current (Unloaded Output)
0.4
V
V
2.5
8
18
mA
Static supply current , Standby mode
(CLKIN pulled to GND)
IDD
4.5
mA
VDD
tON
Operating voltage
3.0
3.3
76
3.6
V
µS
Ω
Power up time (first locked clock cycle after power up)
Clock out impedance
500
ZOUT
AC Electrical Characteristics
Symbol
Parameter
Min
Typ
Max
Unit
fIN
Input frequency for ASM3P2811/12/13/14 A/B
Output frequency for ASM3P2811A/B
Output frequency for ASM3P2812A/B
Output frequency for ASM3P2814A/B
10
10
20
40
40
40
MHz
MHz
MHz
MHz
80
fOUT
160
tLH*
tHL*
tJC
Output rise time (measured at 0.8V to 2.0V)
Output fall time (measured at 2.0V to 0.8V)
Cycle to Cycle Jitter (Unloaded Output)
Output duty cycle
0.5
0.8
0.9
1.0
1.2
1.3
nS
nS
pS
%
±250
50
tD
45
55
* tLH and tHL are measured into a capacitive load of 10pF
Low Power EMI Reduction IC
4 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Package Information
8-Pin SOIC Package
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
0.010
0.069
0.059
0.020
0.010
Min
0.10
1.35
1.25
0.31
0.18
Max
0.25
1.75
1.50
0.51
0.25
A1
A
0.004
0.053
0.049
0.012
0.007
A2
B
C
D
E
0.193 BSC
0.154 BSC
0.050 BSC
0.236 BSC
4.90 BSC
3.91 BSC
1.27 BSC
6.00 BSC
e
H
L
0.016
0°
0.050
8°
0.41
0°
1.27
8°
θ
Note: Controlling dimensions are millimeters.
SOIC: 0.074 grams unit weight.
Low Power EMI Reduction IC
5 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
8-Pin TSSOP Package
H
E
D
A2
A
C
θ
e
A1
L
B
Dimensions
Inches
Symbol
Millimeters
Min
Max
Min
Max
A
A1
A2
B
0.043
1.10
0.15
0.95
0.30
0.20
3.10
4.50
0.002
0.033
0.008
0.004
0.114
0.169
0.006
0.037
0.012
0.008
0.122
0.177
0.05
0.85
0.19
0.09
2.90
4.30
c
D
E
e
0.026 BSC
0.252 BSC
0.65 BSC
6.40 BSC
H
L
0.020
0°
0.028
8°
0.50
0°
0.70
8°
θ
Note: Controlling dimensions are millimeters.
TSSOP: 0.0325 grams unit weight.
Low Power EMI Reduction IC
6 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Ordering Codes
Part Number
ASM3P2811AF-08SR
ASM3P2811AF-08ST
ASM3P2811AF-08TR
ASM3P2811AF-08TT
ASM3P2811BF-08SR
ASM3P2811BF-08ST
ASM3P2811BF-08TR
ASM3P2811BF-08TT
ASM3P2812AF-08SR
ASM3P2812AF-08ST
ASM3P2812AF-08TR
ASM3P2812AF-08TT
ASM3P2812BF-08SR
ASM3P2812BF-08ST
ASM3P2812BF-08TR
ASM3P2812BF-08TT
ASM3P2814AF-08SR
ASM3P2814AF-08ST
ASM3P2814AF-08TR
ASM3P2814AF-08TT
ASM3P2814BF-08SR
ASM3P2814BF-08ST
ASM3P2814BF-08TR
ASM3P2814BF-08TT
ASM3I2811AF-08SR
ASM3I2811AF-08ST
ASM3I2811AF-08TR
ASM3I2811AF-08TT
ASM3I2811BF-08SR
ASM3I2811BF-08ST
ASM3I2811BF-08TR
ASM3I2811BF-08TT
ASM3I2812AF-08SR
ASM3I2812AF-08ST
ASM3I2812AF-08TR
ASM3I2812AF-08TT
ASM3I2812BF-08SR
Marking
3P2811AFS
3P2811AFS
3P2811AFT
3P2811AFT
3P2811BFS
3P2811BFS
3P2811BFT
3P2811BFT
3P2812AFS
3P2812AFS
3P2812AFT
3P2812AFT
3P2812BFS
3P2812BFS
3P2812BFT
3P2812BFT
3P2814AFS
3P2814AFS
3P2814AFT
3P2814AFT
3P2814BFS
3P2814BFS
3P2814BFT
3P2814BFT
3I2811AFS
3I2811AFS
3I2811AFT
3I2811AFT
3I2811BFS
3I2811BFS
3I2811BFT
3I2811BFT
3I2812AFS
3I2812AFS
3I2812AFT
3I2812AFT
3I2812BFS
Package Type
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
Temperature
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Industrial
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
Industrial
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
Industrial
Industrial
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
Industrial
Industrial
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
Industrial
Industrial
SOIC – Tape & Reel, Pb free
SOIC – Tube, Pb free
Industrial
Industrial
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
Industrial
Industrial
SOIC – Tape & Reel, Pb free
Industrial
Low Power EMI Reduction IC
7 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Ordering Codes (cont’d)
Part Number
ASM3I2812BF-08ST
ASM3I2812BF-08TR
ASM3I2812BF-08TT
ASM3I2814AF-08SR
ASM3I2814AF-08ST
ASM3I2814AF-08TR
ASM3I2814AF-08TT
ASM3I2814BF-08SR
ASM3I2814BF-08ST
ASM3I2814BF-08TR
ASM3I2814BF-08TT
ASM3P2811AG-08SR
ASM3P2811AG-08ST
ASM3P2811AG-08TR
ASM3P2811AG-08TT
ASM3P2811BG-08SR
ASM3P2811BG-08ST
ASM3P2811BG-08TR
ASM3P2811BG-08TT
ASM3P2812AG-08SR
ASM3P2812AG-08ST
ASM3P2812AG-08TR
ASM3P2812AG-08TT
ASM3P2812BG-08SR
ASM3P2812BG-08ST
ASM3P2812BG-08TR
ASM3P2812BG-08TT
ASM3P2814AG-08SR
ASM3P2814AG-08ST
ASM3P2814AG-08TR
ASM3P2814AG-08TT
ASM3P2814BG-08SR
ASM3P2814BG-08ST
ASM3P2814BG-08TR
ASM3P2814BG-08TT
ASM3I2811AG-08SR
ASM3I2811AG-08ST
Marking
3I2812BFS
3I2812BFT
3I2812BFT
3I2814AFS
3I2814AFS
3I2814AFT
3I2814AFT
3I2814BFS
3I2814BFS
3I2814BFT
3I2814BFT
3P2811AGS
3P2811AGS
3P2811AGT
3P2811AGT
3P2811BGS
3P2811BGS
3P2811BGT
3P2811BGT
3P2812AGS
3P2812AGS
3P2812AGT
3P2812AGT
3P2812BGS
3P2812BGS
3P2812BGT
3P2812BGT
3P2814AGS
3P2814AGS
3P2814AGT
3P2814AGT
3P2814BGS
3P2814BGS
3P2814BGT
3P2814BGT
3I2811AGS
3I2811AGS
Package Type
Temperature
Industrial
SOIC - Tube, Pb free
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC - Tape & Reel, Pb free
SOIC - Tube, Pb free
Industrial
Industrial
Industrial
Industrial
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC - Tape & Reel, Pb free
SOIC - Tube, Pb free
Industrial
Industrial
Industrial
Industrial
TSSOP – Tape & Reel, Pb free
TSSOP – Tube, Pb free
SOIC – Tape & Reel, Green
SOIC – Tube, Green
Industrial
Industrial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Commercial
Industrial
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC – Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC – Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC – Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC – Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC – Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC – Tube, Green
Industrial
Low Power EMI Reduction IC
8 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Ordering Codes (cont’d)
Part Number
ASM3I2811AG-08TR
ASM3I2811AG-08TT
ASM3I2811BG-08SR
ASM3I2811BG-08ST
ASM3I2811BG-08TR
ASM3I2811BG-08TT
ASM3I2812AG-08SR
ASM3I2812AG-08ST
ASM3I2812AG-08TR
ASM3I2812AG-08TT
ASM3I2812BG-08SR
ASM3I2812BG-08ST
ASM3I2812BG-08TR
ASM3I2812BG-08TT
ASM3I2814AG-08SR
ASM3I2814AG-08ST
ASM3I2814AG-08TR
ASM3I2814AG-08TT
ASM3I2814BG-08SR
ASM3I2814BG-08ST
ASM3I2814BG-08TR
ASM3I2814BG-08TT
Marking
3I2811AGT
3I2811AGT
3I2811BGS
3I2811BGS
3I2811BGT
3I2811BGT
3I2812AGS
3I2812AGS
3I2812AGT
3I2812AGT
3I2812BGS
3I2812BGS
3I2812BGT
3I2812BGT
3I2814AGS
3I2814AGS
3I2814AGT
3I2814AGT
3I2814BGS
3I2814BGS
3I2814BGT
3I2814BGT
Package Type
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
Temperature
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
Industrial
SOIC – Tape & Reel, Green
SOIC – Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC – Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC – Tape & Reel, Green
SOIC - Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC - Tape & Reel, Green
SOIC - Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
SOIC - Tape & Reel, Green
SOIC - Tube, Green
TSSOP – Tape & Reel, Green
TSSOP – Tube, Green
Low Power EMI Reduction IC
9 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
Device Ordering Information
A S M 3 P 2 8 1 1 A G - 0 8 S R
R = Tape & Reel, T = Tube or Tray
O = TSOT23
S = SOIC
T = TSSOP
A = SSOP
V = TVSOP
B = BGA
U = MSOP
E = TQFP
L = LQFP
U = MSOP
P = PDIP
J=TSOT26
C=TDFN (2X2) COL
D = QSOP
X = SC-70
Q = QFN
DEVICE PIN COUNT
F = LEAD FREE AND RoHS COMPLIANT PART
G = GREEN PACKAGE, LEAD FREE, and RoHS
PART NUMBER
X= Automotive
(-40C to +125C) (-40C to +85C)
I= Industrial
P or n/c = Commercial
(0C to +70C)
1 = Clock Generator
2 = Non PLL based
3 = EMI Reduction
4 = DDR support products
5 = STD Zero Delay Buffer
6 = Power Management
7 = Power Management
8 = Power Management
9 = Hi Performance
0 = Reserved
PulseCore Semiconductor Mixed Signal Product
.
Licensed under US patent #5,488,627, #6,646,463 and #5,631,920
Low Power EMI Reduction IC
10 of 11
Notice: The information in this document is subject to change without notice.
ASM3P2811A/B
ASM3P2812A/B
ASM3P2814A/B
April 2008
rev 1.6
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200
Campbell, CA 95008
Copyright © PulseCore Semiconductor
All Rights Reserved
Part Numbers: ASM3P2811A/B
Tel: 408-879-9077
Fax: 408-879-9018
ASM3P2812A/B
ASM3P2814A/B
www.pulsecoresemi.com
Document Version: 1.6
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003
Many PulseCore Semiconductor products are protected by issued patents or by applications for patent
© Copyright 2006 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or registered trademarks
of PulseCore Semiconductor. All other brand and product names may be the trademarks of their respective companies. PulseCore reserves
the right to make changes to this document and its products at any time without notice. PulseCore assumes no responsibility for any errors
that may appear in this document. The data contained herein represents PulseCore’s best data and/or estimates at the time of issuance.
PulseCore reserves the right to change or correct this data at any time, without notice. If the product described herein is under development,
significant changes to these specifications are possible. The information in this product data sheet is intended to be general descriptive
information for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or
customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product described herein, and
disclaims any express or implied warranties related to the sale and/or use of PulseCore products including liability or warranties related to
fitness for a particular purpose, merchantability, or infringement of any intellectual property rights, except as express agreed to in
PulseCore’s Terms and Conditions of Sale (which are available from PulseCore). All sales of PulseCore products are made exclusively
according to PulseCore’s Terms and Conditions of Sale. The purchase of products from PulseCore does not convey a license under any
patent rights, copyrights; mask works rights, trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore
does not authorize its products for use as critical components in life-supporting systems where a malfunction or failure may reasonably be
expected to result in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that the
manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use.
Low Power EMI Reduction IC
11 of 11
Notice: The information in this document is subject to change without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明