ASM5P2308A [PULSECORE]
3.3V Zero-Delay Buffer; 3.3V零延迟缓冲器![ASM5P2308A](http://pdffile.icpdf.com/pdf1/p00155/img/icpdf/ASM5P_859583_icpdf.jpg)
型号: | ASM5P2308A |
厂家: | ![]() |
描述: | 3.3V Zero-Delay Buffer |
文件: | 总17页 (文件大小:363K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
November 2006
rev 1.5
ASM5P2308A
3.3V Zero-Delay Buffer
General Features
the Select Input Decoding Table. If all the output clocks are
not required, Bank B can be three-stated. The select input
also allows the input clock to be directly applied to the
outputs for chip and system testing purposes.
•
•
Zero input - output propagation delay, adjustable by
capacitive load on FBK input.
Multiple configurations - Refer “ASM5P2308A
Configurations “ Table.
Multiple ASM5P2308A devices can accept the same input
clock and distribute it. In this case the skew between the
outputs of the two devices is guaranteed to be less than
700 pS.
•
•
Input frequency range: 15MHz to 133MHz
Multiple low-skew outputs.
•
•
•
Output-output skew less than 200 pS.
Device-device skew less than 700 pS.
Two banks of four outputs, three-stateable by two
select inputs.
The ASM5P2308A is available in five different
configurations(Refer “ASM5P2308A Configurations” Table).
The ASM5P2308A-1 is the base part, where the output
frequencies equal the reference if there is no counter in the
feedback path. The ASM5P2308A-1H is the high-drive
version of the -1 and the rise and fall times on this device
are much faster.
•
Less than 200 pS cycle-to-cycle jitter
(-1, -1H, -2, -3, -4, -5H).
•
•
•
•
Available in 16-pin SOIC and TSSOP packages.
3.3V operation.
Advanced 0.35µ CMOS technology.
Industrial temperature available.
Functional Description
The ASM5P2308A-2 allows the user to obtain 2X and 1X
frequencies on each output bank. The exact configuration
and output frequencies depends on which output drives the
feedback pin. The ASM5P2308A-3 allows the user to
obtain 4X and 2X frequencies on the outputs.
ASM5P2308A is
a versatile, 3.3V zero-delay buffer
designed to distribute high-speed clocks. It is available in a
16-pin package. The part has an on-chip PLL which locks
to an input clock presented on the REF pin. The PLL
feedback is required to be driven to FBK pin, and can be
obtained from one of the outputs. The input-to-input
propagation delay is guaranteed to be less than 350 pS,
and the output-to-output skew is guaranteed to be less than
250 pS.
The ASM5P2308A-4 enables the user to obtain 2X clocks
on all outputs.
The ASM5P2308A-5H is a high-drive version with REF/2
on both banks. Thus, the part is extremely versatile, and
can be used in a variety of applications.
The ASM5P2308A has two banks of four outputs each,
which can be controlled by the select inputs as shown in
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008 • Tel: 408-879-9077 • Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Block Diagram
FBK
/2
PLL
MUX
REF
/2
CLKA1
CLKA2
CLKA3
CLKA4
Extra Divider (-5H)
Extra Divider (-3, -4)
S2
S1
Select Input
Decoding
/2
CLKB1
CLKB2
CLKB3
CLKB4
Extra Divider (-2, -3)
Select Input Decoding for ASM5P2308A
S2
0
S1
0
Clock A1 - A4
Three-state
Driven
Clock B1 - B4
Three-state
Three-state
Driven
Output Source
PLL Shut-Down
PLL
Y
N
Y
N
0
1
PLL
1
0
Driven1
Reference
PLL
1
1
Driven
Driven
ASM5P2308A Configurations
Device
Feedback From
Bank A or Bank B
Bank A or Bank B
Bank A
Bank A Frequency
Bank B Frequency
Reference
ASM5P2308A-1
ASM5P2308A-1H
ASM5P2308A-2
ASM5P2308A-2
ASM5P2308A-3
ASM5P2308A-3
ASM5P2308A-4
ASM5P2308A-5H
Note:
Reference
Reference
Reference
Reference
Reference /2
Bank B
2 X Reference
2 X Reference
4 X Reference
2 X Reference
Reference /2
Reference
Bank A
Reference or Reference2
2 X Reference
2 X Reference
Reference /2
Bank B
Bank A or Bank B
Bank A or Bank B
1. Outputs are non- inverted on 2308A-2 and 2308A-3 in bypass mode, S2 = 1 and S1 = 0.
2. Output phase is indeterminant (0° or 180° from input clock). If phase integrity is required, use the ASM5P2308A-2.
3.3V Zero Delay Buffer
2 of 17
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Zero Delay and Skew Control
All outputs should be uniformly loaded to achieve Zero Delay between input and output.
1500
1000
500
0
5
-30
-25
10
25 30
-15
15
20
-20
-10
-5
0
-500
-1000
-1500
Output Load Difference: FBK Load - CLKA/CLKB Load (pF)
To close the feedback loop of the ASM5P2308A, the FBK pin can be driven from any of the eight available output pins. The
output driving the FBK pin will be driving a total load of 7 pF plus any additional load that it drives. The relative loading of
this output (with respect to the remaining outputs) can adjust the input output delay. This is shown in the above graph.
For applications requiring zero input-output delay, all outputs including the one providing feedback should be equally
loaded. If input-output delay adjustments are required, use the above graph to calculate loading differences between the
feedback output and remaining outputs. For zero output-output skew, be sure to load outputs equally.
3.3V Zero Delay Buffer
3 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Pin Configuration
REF
CLKA1
1
2
16
15
FBK
CLKA4
CLKA3
CLKA2
VDD
3
4
5
6
14
13
12
11
ASM5P2308A
VDD
GND
CLKB4
GND
CLKB1
10 CLKB3
CLKB2
S2
7
8
9
S1
Pin Description for ASM5P2308A
Pin #
1
2
3
4
Pin Name
REF3
Description
Input reference frequency, 5V tolerant input
Buffered clock output, bank A
Buffered clock output, bank A
3.3V supply
CLKA14
CLKA24
VDD
5
6
7
8
GND
Ground
CLKB14
CLKB2 4
S2 5
Buffered clock output, bank B
Buffered clock output, bank B
Select input, bit 2
9
S1 5
Select input, bit 1
10
11
12
13
14
15
16
CLKB3 4
CLKB4 4
GND
Buffered clock output, bank B
Buffered clock output, bank B
Ground
VDD
3.3V supply
CLKA3 4
CLKA4 4
FBK
Buffered clock output, bank A
Buffered clock output, bank A
PLL feedback input
Notes:
3. Weak pull-down.
4. Weak pull-down on all outputs.
5. Weak pull-up on these inputs.
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Absolute Maximum Ratings
Parameter
Min
-0.5
-0.5
-0.5
-65
Max
+7.0
VDD + 0.5
7
Unit
V
Supply Voltage to Ground Potential
DC Input Voltage (Except REF)
DC Input Voltage (REF)
V
V
Storage Temperature
+150
260
°C
°C
°C
KV
Max. Soldering Temperature (10 sec)
Junction Temperature
150
Static Discharge Voltage (As per JEDEC STD22- A114-B)
2
Note: These are stress ratings only and functional usage is not implied. Exposure to absolute maximum ratings for prolonged periods can affect device
reliability.
Operating Conditions for ASM5P2308A Commercial Temperature Devices
Parameter
Description
Min
3.0
0
Max
3.6
70
Unit
V
VDD
Supply Voltage
TA
Operating Temperature (Ambient Temperature)
Load Capacitance, below 100MHz
Load Capacitance, from 100MHz to 133MHz
Input Capacitance6
°C
CL
30
pF
pF
pF
CL
10
CIN
7
Note:
6. Applies to both Ref Clock and FBK.
Electrical Characteristics for ASM5P2308A Commercial Temperature Devices
Parameter
Description
Input LOW Voltage
Input HIGH Voltage
Input LOW Current
Input HIGH Current
Test Conditions
Min
Max
0.8
Unit
V
VIL
VIH
IIL
2.0
V
VIN = 0V
50.0
100.0
0.4
µA
µA
V
IIH
VIN = VDD
IOL = 8mA (-1, -2, -3, -4)
IOH = 12mA (-1H, -5H)
VOL
VOH
Output LOW Voltage 7
IOL = -8mA (-1, -2, -3, -4)
IOH = -12mA (-1H, -5H)
2.4
V
Output HIGH Voltage 7
Unloaded outputs 100MHz REF (-2,-3,-4)
49
60
34
18
Select inputs at VDD or GND
(-1H,-5H)
IDD
Supply Current8
mA
Unloaded outputs, 66MHz REF (-1, -2, -3, -4)
Unloaded outputs, 33MHz REF (-1, -2, -3, -4)
Note:
7. Parameter is guaranteed by design and characterization. Not 100% tested in production.
8. Supply Currents are measured for PLL-Bypass Mode (S2=1, S1=0)
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Switching Characteristics for ASM5P2308A Commercial Temperature Devices
Description
Test Conditions
Min
15
Typ
Max
100
133
133
Unit
MHz
MHz
MHz
Parameter
1/t1
1/t1
t1/
Output Frequency
30pF load, All devices
20pF load, -1H, -5H devices 8
Output Frequency
15
Output Frequency
15pF load, -1, -2, -3, -4 devices
15
Duty Cycle 9= (t2 / t1) * 100
(-1, -2, -3, -4, -1H, -5H)
Duty Cycle 9= (t2 / t1) * 100
(-1, -2, -3, -4, -1H, -5H)
Output Rise Time 9
(-1, -2, -3, -4)
Measured at 1.4V, FOUT = <66.66MHz
30pF load
40.0
45.0
50.0
50.0
60.0
55.0
2.20
1.50
1.50
2.20
1.50
1.25
200
%
Measured at 1.4V, FOUT = <50MHz
15pF load
%
t3
t3
t3
t4
t4
t4
Measured between 0.8V and 2.0V 30pF load
Measured between 0.8V and 2.0V 15pF load
Measured between 0.8V and 2.0V 30pF load
Measured between 2.0V and 0.8V 30pF load
Measured between 0.8V and 2.0V 15pF load
Measured between 2.0V and 0.8V 30pF load
All outputs equally loaded
nS
nS
nS
nS
nS
nS
pS
Output Rise Time 9
(-1, -2, -3, -4)
Output Rise Time 9
(-1H, -5H)
Output Fall Time 9
(-1, -2, -3, -4)
Output Fall Time 9
(-1, -2, -3, -4)
Output Fall Time 9
(-1H, -5H)
Output-to-output skew on same
bank (-1, -2, -3, -4) 9
Output-to-output skew
(-1H, -5H)
All outputs equally loaded
200
t5
Output bank A -to- output
Bank B skew (-1, -4, -5H)
Output bank A -to- output
Bank B skew (-2, -3)
Delay, REF Rising Edge to FBK
Rising Edge 9
All outputs equally loaded
200
All outputs equally loaded
400
t6
t7
Measured at VDD /2
0
0
±250
pS
Device-to-Device Skew 9
Measured at VDD/2 on the FBK pins of the device
Measured at 66.67MHz, loaded outputs, 15pF load
Measured at 66.67MHz, loaded outputs, 30pF load
700
200
200
pS
pS
Cycle-to-cycle jitter 9
(-1, -1H, -4, -5H)
tJ
Measured at 133.3MHz, loaded outputs, 15pF
load
100
400
400
Measured at 66.67MHz, loaded outputs, 30pF load
pS
Cycle-to-cycle jitter 9
(-2, -3)
tJ
Measured at 66.67MHz, loaded outputs, 15pF
load
tLOCK
Stable power supply, valid clock presented on REF
and FBK pins
PLL Lock Time 9
1.0
mS
Note:
9. Parameter is guaranteed by design and characterization. Not 100% tested in production.
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Operating Conditions for ASM5I2308A Industrial Temperature Devices
Parameter
Description
Min
Max
Unit
VDD
TA
Supply Voltage
3.0
-40
3.6
85
30
15
7
V
Operating Temperature (Ambient Temperature)
Load Capacitance, below 100MHz
Load Capacitance, from 100MHz to 133MHz
Input Capacitance
°C
pF
pF
pF
CL
CL
CIN
Electrical Characteristics for ASM5I2308A Industrial Temperature Devices
Parameter
Description
Test Conditions
Min
Max
Unit
VIL
VIH
IIL
Input LOW Voltage
Input HIGH Voltage
Input LOW Current
Input HIGH Current
0.8
V
V
2.0
VIN = 0V
50.0
µA
µA
IIH
VIN = VDD
100.0
IOL = 8mA (-1, -2)
IOH = 12mA (-1H, -5H)
VOL
Output LOW Voltage
Output HIGH Voltage
0.4
V
V
IOL = -8mA (-1, -2)
IOH = -12mA (-1H, -5H)
VOH
2.4
(-2,-3,-4)
(-1H,-5H)
49
60
34
18
Unloaded outputs 100MHz REF,
Select inputs at VDD or GND
IDD
Supply Current10
mA
Unloaded outputs, 66MHz REF
Unloaded outputs, 33MHz REF
(-1, -2, -3, -4)
(-1, -2, -3, -4)
Note:
10. Supply Currents are measured for PLL-Bypass Mode (S2=1, S1=0).
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Switching Characteristics for ASM5I2308A - Industrial Temperature Devices
Description
Test Conditions
Min Typ
Max
100
133
133
Unit
MHz
MHz
MHz
Parameter
1/t1
1/t1
1/t1
Output Frequency
30pF load, All devices
20pF load, -1H, -5H devices 8
15
15
15
Output Frequency
Output Frequency
15pF load, -1, -2, -3, -4 devices
Duty Cycle 11 = (t2 / t1) * 100
(-1, -2, -3, -4, -1H, -5H)
Duty Cycle 11= (t2 / t1) * 100
(-1, -2, -3, -4, -1H, -5H)
Output Rise Time 11
(-1, -2, -3, -4)
Measured at 1.4V, FOUT = <66.66MHz 30pF load
Measured at 1.4V, FOUT = <50MHz 15pF load
Measured between 0.8V and 2.0V 30pF load
Measured between 0.8V and 2.0V 15pF load
Measured between 0.8V and 2.0V 30pF load
Measured between 2.0V and 0.8V 30pF load
Measured between 0.8V and 2.0V 15pF load
Measured between 2.0V and 0.8V 30pF load
All outputs equally loaded
40.0 50.0
45.0 50.0
60.0
55.0
2.50
1.50
1.50
2.50
1.50
1.25
200
%
%
t3
t3
t3
t4
t4
t4
nS
nS
nS
nS
nS
nS
pS
Output Rise Time 11
(-1, -2, -3, -4)
Output Rise Time 11
(-1H, -5H)
Output Fall Time 11
(-1, -2, -3, -4)
Output Fall Time 11
(-1, -2, -3, -4)
Output Fall Time 11
(-1H, -5H)
Output-to-output skew on same
bank (-1, -2, -3, -4) 11
Output-to-output skew
(-1H, -5H)
All outputs equally loaded
200
t5
Output bank A -to- output bank B
skew (-1, -4, -5H)
All outputs equally loaded
200
Output bank A -to- output bank B
skew (-2, -3)
All outputs equally loaded
400
Delay, REF Rising Edge to FBK
Rising Edge 11
Device-to-Device Skew 11
t6
t7
Measured at VDD /2
0
0
±250
pS
Measured at VDD/2 on the FBK pins of the device
Measured at 66.67MHz, loaded outputs, 15pF load
Measured at 66.67MHz, loaded outputs, 30pF load
Measured at 133.3MHz, loaded outputs, 15pF load
Measured at 66.67MHz, loaded outputs, 30pF load
Measured at 66.67MHz, loaded outputs,15pF load
700
200
200
100
400
400
pS
pS
Cycle-to-cycle jitter 11
(-1, -1H, -4, -5H)
tJ
Cycle-to-cycle jitter 11
(-2, -3)
pS
tJ
tLOCK
Stable power supply, valid clock presented on REF
and FBK pins
PLL Lock Time 11
1.0
mS
Note:
11. Parameter is guaranteed by design and characterization. Not 100% tested in production.
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Switching Waveforms
Duty Cycle Timing
t1
t2
1.4 V
1.4 V
1.4 V
All Outputs Rise/Fall Time
3.3 V
0 V
2.0 V
2.0 V
0.8 V
0.8 V
OUTPUT
t4
t3
Output - Output Skew
1.4 V
OUTPUT1
1.4 V
OUTPUT2
t
5
Input - Output Propagation Delay
VDD /2
INPUT
VDD /2
OUTPUT
t6
Device - Device Skew
VDD /2
CLKOUT, Device 1
VDD /2
CLKOUT, Device 2
t7
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Test Circuits
TEST CIRCUIT #1
+3.3V
+3.3V
VDD
CLOAD
0.1uF
0.1uF
OUTPUT
VDD
GND
GND
TEST CIRCUIT # 2
+3.3V
+3.3V
VDD
1KΩ
1KΩ
0.1uF
0.1uF
OUTPUT
CLOAD
10pF
VDD
GND
GND
For parameter t8 (output skew rate) on -1H devices
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Package Information
16-lead (150 Mil) Molded SOIC Package
PIN 1 ID
1
8
H
E
9
16
h
D
Seating Plane
A2
A
C
θ
0.004
e
L
A1
B
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
1.35
0.10
1.25
0.33
0.19
9.80
3.80
Max
1.75
0.25
1.50
0.53
0.27
10.01
4.00
A
A1
A2
B
0.053
0.004
0.049
0.013
0.008
0.386
0.150
0.069
0.010
0.059
0.022
0.012
0.394
0.157
C
D
E
e
0.050 BSC
1.27 BSC
H
h
0.228
0.010
0.016
0°
0.244
0.016
0.035
8°
5.80
0.25
0.40
0°
6.20
0.41
0.89
8°
L
θ
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
16-lead TSSOP(4.40-MM Body)
1
8
PIN 1 ID
E
H
9
16
A
Seating Plane
C
θ
A2
A1
e
B
L
D
Dimensions
Symbol
Inches
Millimeters
Min
Max
Min
Max
A
A1
A2
B
0.043
0.006
0.041
0.012
0.008
0.201
0.177
1.20
0.15
1.05
0.30
0.20
5.10
4.50
0.002
0.031
0.007
0.004
0.193
0.169
0.05
0.80
0.19
0.09
4.90
4.30
C
D
E
e
0.026 BSC
0.252 BSC
0.65 BSC
6.40 BSC
H
L
0.020
0°
0.030
8°
0.50
0°
0.75
8°
θ
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Ordering Codes
Ordering Code
Marking
Package Type
Temperature
ASM5P2308AF-1-16-ST
ASM5I2308AF-1-16-ST
ASM5P2308AF-1-16-SR
ASM5I2308AF-1-16-SR
ASM5P2308AF-1-16-TT
ASM5I2308AF-1-16-TT
ASM5P2308AF-1-16-TR
ASM5I2308AF-1-16-TR
ASM5P2308AF-1H-16-ST
ASM5I2308AF-1H-16-ST
5P2308AF-1
5I2308AF-1
5P2308AF-1
5I2308AF-1
5P2308AF-1
5I2308AF-1
5P2308AF-1
5I2308AF-1
5P2308AF-1H
5I2308AF-1H
16-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
16-pin 150-mil SOIC-TUBE, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
16-pin 150-mil SOIC-TUBE, Pb free
ASM5P2308AF-1H-16-SR 5P2308AF-1H
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
ASM5I2308AF-1H-16-SR
ASM5P2308AF-1H-16-TT
ASM5I2308AF-1H-16-TT
5I2308AF-1H
5P2308AF-1H
5I2308AF-1H
Commercial
Industrial
ASM5P2308AF-1H-16-TR 5P2308AF-1H
Commercial
Industrial
ASM5I2308AF-1H-16-TR
ASM5P2308AF-2-16-ST
ASM5I2308AF-2-16-ST
ASM5P2308AF-2-16-SR
ASM5I2308AF-2-16-SR
ASM5P2308AF-2-16-TT
ASM5I2308AF-2-16-TT
ASM5P2308AF-2-16-TR
ASM5I2308AF-2-16-TR
ASM5P2308AF-3-16-ST
ASM5I2308AF-3-16-ST
ASM5P2308AF-3-16-SR
ASM5I2308AF-3-16-SR
ASM5P2308AF-3-16-TT
ASM5I2308AF-3-16-TT
ASM5P2308AF-3-16-TR
ASM5I2308AF-3-16-TR
ASM5P2308AF-4-16-ST
ASM5I2308AF-4-16-ST
ASM5P2308AF-4-16-SR
5I2308AF-1H
5P2308AF-2
5I2308AF-2
5P2308AF-2
5I2308AF-2
5P2308AF-2
5I2308AF-2
5P2308AF-2
5I2308AF-2
5P2308AF-3
5I2308AF-3
5P2308AF-3
5I2308AF-3
5P2308AF-3
5I2308AF-3
5P2308AF-3
5I2308AF-3
5P2308AF-4
5I2308AF-4
5P2308AF-4
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-pin 150-mil SOIC-TUBE, Pb free
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
Commercial
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Ordering Codes (Contd…)
Ordering Code
Marking
Package Type
Temperature
ASM5I2308AF-4-16-SR
ASM5P2308AF-4-16-TT
ASM5I2308AF-4-16-TT
ASM5P2308AF-4-16-TR
ASM5I2308AF-4-16-TR
ASM5P2308AF-5H-16-ST
ASM5I2308AF-5H-16-ST
5I2308AF-4
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-pin 150-mil SOIC-TUBE, Pb free
Industrial
Commercial
Industrial
5P2308AF-4
5I2308AF-4
5P2308AF-4
5I2308AF-4
5P2308AF-5H
5I2308AF-5H
Commercial
Industrial
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Pb free
ASM5P2308AF-5H-16-SR 5P2308AF-5H
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-pin 150-mil SOIC-TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TUBE, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-PIN 150-mil TSSOP - TAPE & REEL, Pb free
16-pin 150-mil SOIC-TUBE, Green
Commercial
Industrial
ASM5I2308AF-5H-16-SR
ASM5P2308AF-5H-16-TT
ASM5I2308AF-5H-16-TT
5I2308AF-5H
5P2308AF-5H
5I2308AF-5H
Commercial
Industrial
ASM5P2308AF-5H-16-TR 5P2308AF-5H
Commercial
Industrial
ASM5I2308AF-5H-16-TR
ASM5P2308AG-1-16-ST
ASM5I2308AG-1-16-ST
ASM5P2308AG-1-16-SR
ASM5I2308AG-1-16-SR
ASM5P2308AG-1-16-TT
ASM5I2308AG-1-16-TT
ASM5P2308AG-1-16-TR
ASM5I2308AG-1-16-TR
5I2308AF-5H
5P2308AG-1
5I2308AG-1
5P2308AG-1
5I2308AG-1
5P2308AG-1
5I2308AG-1
5P2308AG-1
5I2308AG-1
Commercial
Industrial
16-pin 150-mil SOIC-TUBE, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-pin 150-mil SOIC-TUBE, Green
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
ASM5P2308AG-1H-16-ST 5P2308AG-1H
ASM5I2308AG-1H-16-ST 5I2308AG-1H
ASM5P2308AG-1H-16-SR 5P2308AG-1H
ASM5I2308AG-1H-16-SR 5I2308AG-1H
ASM5P2308AG-1H-16-TT 5P2308AG-1H
ASM5I2308AG-1H-16-TT 5I2308AG-1H
ASM5P2308AG-1H-16-TR 5P2308AG-1H
Commercial
Industrial
16-pin 150-mil SOIC-TUBE, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-pin 150-mil SOIC-TUBE, Green
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
ASM5I2308AG-1H-16-TR
ASM5P2308AG-2-16-ST
ASM5I2308AG-2-16-ST
ASM5P2308AG-2-16-SR
ASM5I2308AG-2-16-SR
ASM5P2308AG-2-16-TT
5I2308AG-1H
5P2308AG-2
5I2308AG-2
5P2308AG-2
5I2308AG-2
5P2308AG-2
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-PIN 150-mil TSSOP - TUBE, Green
Commercial
Industrial
Commercial
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Ordering Codes (Contd…)
Ordering Code
Marking
Package Type
Temperature
ASM5I2308AG-2-16-TT
ASM5P2308AG-2-16-TR
ASM5I2308AG-2-16-TR
ASM5P2308AG-3-16-ST
ASM5I2308AG-3-16-ST
ASM5P2308AG-3-16-SR
ASM5I2308AG-3-16-SR
ASM5P2308AG-3-16-TT
ASM5I2308AG-3-16-TT
ASM5P2308AG-3-16-TR
ASM5I2308AG-3-16-TR
ASM5P2308AG-4-16-ST
ASM5I2308AG-4-16-ST
ASM5P2308AG-4-16-SR
ASM5I2308AG-4-16-SR
ASM5P2308AG-4-16-TT
ASM5I2308AG-4-16-TT
ASM5P2308AG-4-16-TR
ASM5I2308AG-4-16-TR
5I2308AG-2
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-pin 150-mil SOIC-TUBE, Green
Industrial
Commercial
Industrial
5P2308AG-2
5I2308AG-2
5P2308AG-3
5I2308AG-3
5P2308AG-3
5I2308AG-3
5P2308AG-3
5I2308AG-3
5P2308AG-3
5I2308AG-3
5P2308AG-4
5I2308AG-4
5P2308AG-4
5I2308AG-4
5P2308AG-4
5I2308AG-4
5P2308AG-4
5I2308AG-4
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-pin 150-mil SOIC-TUBE, Green
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-pin 150-mil SOIC-TUBE, Green
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
ASM5P2308AG-5H-16-ST 5P2308AG-5H
ASM5I2308AG-5H-16-ST 5I2308AG-5H
ASM5P2308AG-5H-16-SR 5P2308AG-5H
ASM5I2308AG-5H-16-SR 5I2308AG-5H
ASM5P2308AG-5H-16-TT 5P2308AG-5H
ASM5I2308AG-5H-16-TT 5I2308AG-5H
ASM5P2308AG-5H-16-TR 5P2308AG-5H
ASM5I2308AG-5H-16-TR 5I2308AG-5H
Commercial
Industrial
16-pin 150-mil SOIC- TUBE, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-pin 150-mil SOIC-TAPE & REEL, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TUBE, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
16-PIN 150-mil TSSOP - TAPE & REEL, Green
Commercial
Industrial
Commercial
Industrial
Commercial
Industrial
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
Device Ordering Information
A S M 5 P 2 3 0 8 A F - 1 6 - T R
R = Tape & Reel, T = Tube or Tray
O = SOT
U = MSOP
E = TQFP
L = LQFP
U = MSOP
P = PDIP
S = SOIC
T = TSSOP
A = SSOP
V = TVSOP
B = BGA
D = QSOP
X = SC-70
Q = QFN
DEVICE PIN COUNT
F = LEAD FREE AND RoHS COMPLIANT PART
G = GREEN PACKAGE, LEAD FREE, and RoHS
PART NUMBER
X= Automotive
I= Industrial
P or n/c = Commercial
(0C to +70C)
(-40C to +125C) (-40C to +85C)
1 = Reserved
6 = Power Management
7 = Power Management
8 = Power Management
9 = Hi Performance
2 = Non PLL based
3 = EMI Reduction
4 = DDR support products
PulseCore Semiconductor Mixed Signal Product
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
November 2006
rev 1.5
ASM5P2308A
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200
Campbell, CA 95008
Copyright © PulseCore Semiconductor
All Rights Reserved
Preliminary Information
Tel: 408-879-9077
Part Number: ASM5P2308A
Document Version: v1.5
Fax: 408-879-9018
www.pulsecoresemi.com
Note: This product utilizes US Patent # 6,646,463 Impedance Emulator Patent issued to PulseCore Semiconductor, dated 11-11-2003
© Copyright 2006 PulseCore Semiconductor Corporation. All rights reserved. Our logo and name are trademarks or
registered trademarks of PulseCore Semiconductor. All other brand and product names may be the trademarks of their
respective companies. PulseCore reserves the right to make changes to this document and its products at any time without
notice. PulseCore assumes no responsibility for any errors that may appear in this document. The data contained herein
represents PulseCore’s best data and/or estimates at the time of issuance. PulseCore reserves the right to change or
correct this data at any time, without notice. If the product described herein is under development, significant changes to
these specifications are possible. The information in this product data sheet is intended to be general descriptive information
for potential customers and users, and is not intended to operate as, or provide, any guarantee or warrantee to any user or
customer. PulseCore does not assume any responsibility or liability arising out of the application or use of any product
described herein, and disclaims any express or implied warranties related to the sale and/or use of PulseCore products
including liability or warranties related to fitness for a particular purpose, merchantability, or infringement of any intellectual
property rights, except as express agreed to in PulseCore’s Terms and Conditions of Sale (which are available from
PulseCore). All sales of PulseCore products are made exclusively according to PulseCore’s Terms and Conditions of Sale.
The purchase of products from PulseCore does not convey a license under any patent rights, copyrights; mask works rights,
trademarks, or any other intellectual property rights of PulseCore or third parties. PulseCore does not authorize its products
for use as critical components in life-supporting systems where a malfunction or failure may reasonably be expected to
result in significant injury to the user, and the inclusion of PulseCore products in such life-supporting systems implies that
the manufacturer assumes all risk of such use and agrees to indemnify PulseCore against all claims arising from such use.
3.3V Zero Delay Buffer
16 of 16
Notice: The information in this document is subject to change without notice.
相关型号:
©2020 ICPDF网 联系我们和版权申明