PA0807NL [PULSE]

High Frequency Planar Transforms;


型号：	PA0807NL
厂家：	PULSE A TECHNITROL COMPANY
描述：	High Frequency Planar Transforms 变压器
文件：	总4页 (文件大小：962K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

High Frequency Planar Transforms

PA08XXNL Series (up to 140W)

Power Rating: up to 140W

Height: 8.6mm to 9.7mm Max

Footprint: 23.4mm x 21.6mm Max

Frequency Range: 200kHz to 700kHz

Isolation (Primary to Secondary & Core): 1750VDC

Electrical Speciﬁcations @ 25°C - Operating Temperature -40°C to +125°C

Primary ¹

Inductance

(µH MIN)

Leakage ²

Inductance

(µH MAX)

Maximum

Height

(mm)

Turns Ratio

Primary B

DCR (mΩ MAX)

Part ³

Number

Schematic

Primary

Primary A

Secondary

PA0801NL

PA0802NL

PA0803NL

PA0804NL *

PA0805NL

PA0806NL

PA0807NL

PA0808NL

PA0809NL *

PA0810NL *

PA0811NL

153

194

240

290

345

153

0.45

0.55

0.60

0.65

0.45

0.55

0.60

0.65

0.45

0.50

0.55

17.5

8.6

9.7

(1T:1T:1T:1T)

17.5

.875 & .875

1.75 & 1.75

194

240

290

345

153

1T & 1T

17.5

PA0812NL

PA0813NL

PA0814NL *

PA0815NL

194

240

290

345

2T & 1T

Notes:

Inductance is measure, where applicable, with both primary windings connected in

series (2 to 5, with 3 and 4 shorted).

4. Basic insulated parts can be made available. Please contact Pulse for availability.

* Contact Pulse for availability

2. Leakage inductance is measured on winding (2-5) with (3,4) and (7, 8, 9, 10, 11)

shorted.

3. 3. The NL suﬃx indicates an RoHS-compliant part number. Non-NL suﬃxed parts are

not necessarily RoHS compliant, but are electrically and mechanically equivalnt to

NL versions. If a part number does not have the “NL” suﬃx, but an RoHS compliant

version is required, please contact Pulse for availability.

power.pulseelectronics.com

SPM2007_52 (06/19) http://www.power.pulseelectronics.com/contact

High Frequency Planar Transforms

PA08XXNL Series (up to 140W)

Mechanical

PA08XXXNL

Weight ...........................11.0grams

Tape & Reel ........................180/reel

Tray ......................................40/tray

NOTE: The above is a universal

footprint for a component that has all

11 pins populated. For a given number,

it is only necessary to provide pads

for the termination shown in the

schematics on the next page.

Dimensions:^.Inches

Unless otherwise speciﬁed,

..010

all tolerances are:

0,25

Schematics

PA08XXXNL

Notes:

1. The above transformers have been tested and approved by Pulse’s IC 2. To determine if the transformer is suitable for your application, it is

partners and are cited in the appropriate datasheet or evaluation board

documentation at these companies. To determine which IC and IC com-

panies are matched with the above transformers, please refer to the IC

cross reference on the Pulse web page. See the Spy glass transformer

matrix on the next page for other winding conﬁgurations that can be

made available.

necessary to ensure that the temperature rise of the component (ambi-

ent plus temperature rise) does not exceed its operating temperature.

To determine the approximate temperature rise of the transformer,

refer to the graphs below.

power.pulseelectronics.com

SPM2007_52 (06/19) http://www.power.pulseelectronics.com/contact

High Frequency Planar Transforms

PA08XXNL Series (up to 140W)

PA08XX Transformer Winding Conﬁguration Matrix

The following is a matrix of the winding conﬁgurations that are possible

with the Pulse PA08XX Planar Transformer Platform. The package is

typically capable of handling between 80-140W of power depending on the

application, ambient conditions and available cooling. Once a conﬁguration

is selected, the formulae and charts can be used to determine the

approximate power dissipation and temperature rise of the component in a

given application.

SECONDARY WINDINGS

Single Winding

Tapped Winding

Dual Winding

Turns

1:1

1:2

1:3

2:2

1T & 1T

1T & 2T

3.5

DCR (mΩ)

0.44

1.3

3.5

1.3

3.5

1.3

PA0806

PA0808

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0806

PA0808

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0811

PA0813

PA0815

PA0811

PA0812

PA0813

PA0814

PA0815

PA0811

PA0812

PA0813

PA0814

PA0815

PA0801

PA0803

PA0805

PA0801

PA0802

PA0803

PA0804

PA0805

PA0801

PA0802

PA0803

PA0804

PA0805

PA0806

PA0808

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0811

PA0813

PA0815

PA0811

PA0812

PA0813

PA0814

PA0815

PA0811

PA0812

PA0813

PA0814

PA0815

PA0801

PA0803

PA0805

PA0801

PA0802

PA0803

PA0804

PA0805

PA0801

PA0802

PA0803

PA0804

PA0805

PA0801

PA0803

PA0805

PA0801

PA0802

PA0803

PA0804

PA0805

PA0801

PA0802

PA0803

PA0804

PA0805

PA0806

PA0808

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0806

PA0807

PA0808

PA0809

PA0810

PA0811

PA0813

PA0815

PA0811

PA0812

PA0813

PA0814

PA0815

PA0811

PA0812

PA0813

PA0814

PA0815

12.5

10T

11T

12T

4T/4T

4T/5T

5T/5T

5T/6T

6T/6T

20/20

20/25

25/25

25/30

30/30

power.pulseelectronics.com

SPM2007_52 (06/19) http://www.power.pulseelectronics.com/contact

High Frequency Planar Transforms

PA08XXNL Series (up to 140W)

Notes:

1. The primary inductance for any conﬁguration can be calculated as:

Primary Inductance (µH MIN) = 2.4 * (Primary_Turns)²

tions as shown in the schematics. Transformers with primary size aux. windings are

non-standard and can be made available upon request, but are not typically available

from stock. The primary aux. winding can be between 2 and 16 turns. To add a pri-

mary aux. winding to a given base, use the extension .0XX. For example, to add a 4T

aux. winding to the base part number PA0801NL, use the part number PA0801.004NL.

To add a 16T aux. winding, use the part number PA0801.016NL.

2. The above base part numbers (PA08XXNL) are available from stock.

3. It is possible to add a small gap to the transformer. Gapped transformers are non-

standard and can be made available upon request, but are not typically available

from stock. To request a gapped version of the transformer, add a suﬃx “G” to the

base number (i.e. PA0801GNL or PA0801.004GNL etc.). The nominal inductance with

the a gap can be calculated as:

5. Optional Tape & Reel packaging can be ordered by adding a “T” suﬃx to the

complete part number (i.e. PA0801 becomes PA0801T for no AUX - PA0801.009NL

becomes PA0801T.009NLT for 9T AUX). PUlse complies to industry standard tape and

reel speciﬁcation EIA481.

Primary Inductance (µH nominal) = 0.69 * (Primary Turns)²

4. It is possible to add a primary side aux. winding to any of the above conﬁgura-

For More Information

Pulse Worldwide Headquarters

15255 Innovation Drive Ste 100

San Diego, CA 92128

Pulse Europe

Pulse China Headquarters

Pulse Electronics (ShenZhen) CO., LTD

D708, Shenzhen Academy of

Aerospace Technology,

The 10th Keji South Road,

Nanshan District, Shenzhen,

P.R. China 518057

Pulse North China

Room 2704/2705

Super Ocean Finance Ctr.

2067 Yan An Road West

Shanghai 200336

China

Pulse South Asia

3 Fraser Street 0428

DUO Tower

Pulse North Asia

1F., No.111 Xiyuan Road

Zhongli District

Taoyuan City 32057

Taiwan (R.O.C)

Pulse Electronics GmbH

Am Rottland 12

58540 Meinerzhagen

Germany

U.S.A.

Singapore 189352

Tel: 858 674 8100

Fax: 858 674 8262

Tel: 49 2354 777 100

Fax: 49 2354 777 168

Tel: 86 755 33966678

Fax: 86 755 33966700

Tel: 65 6287 8998

Fax: 65 6280 0080

Tel: 886 3 4356768

Fax: 886 3 4356820

Tel: 86 21 62787060

Fax: 86 2162786973

Performance warranty of products oﬀered on this data sheet is limited to the parameters speciﬁed. Data is subject to change without notice. Other brand and product names mentioned

power.pulseelectronics.com

SPM2007_52 (06/19) http://www.power.pulseelectronics.com/contact

PA0807NL [PULSE]

相关型号：

PA0808NL

PA0809NL

PA080XS1

PA0810NL

PA0811NL

PA0812

PA0812NL

PA0813NL

PA0814NL

PA0815NL

PA0853DG-41

PA0853DG-41H