PA4792.XXXHLT [PULSE]
SMT Power Inductors;
| 型号： | PA4792.XXXHLT |
| 厂家： | 
PULSE A TECHNITROL COMPANY |
| 描述： | SMT Power Inductors |
| 文件： | 总6页 (文件大小：725K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT Power Inductors
Power Beads - PA4792.XXXHL, PA4793.XXXHL & PA5121 Series
POWER PRODUCTS
Current Rating: PA4792 (100Apk), PA4793 (60Apk)
Inductance Range: 200nH to 500nH
Height: 7.25mm Max (PA4792)
6.6mm Max (PA4793)
5.35mm Max (PA5121)
Footprint: 22.2mm x 8.2mm Max (PA4792)
15.1mm x 8.6mm Max (PA4793)
8.3mm x 7.5mm Max (PA5121)
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C7
Saturation Current 5
Inductance1
@ 0ADC
Inductance2
@Irated
Irated 3
DCR 4
Heating Current6
Hi-pot10
(Vdc)
Part
(A TYP)
Number
(ADC)
(mΩ )
(A TYP)
(nH 10ꢀ%
(nH TYP)
25°C
100
60
100°C
PA4792.XXXHL: 22.2 x 8.2 x 7.25mm Max
PA4792.231HLT
230
230
470
46
40
0.47 10%
1.15 15%
86
51
46
40
200
200
PA4793.XXXHL: 15.1 x 8.6 x 6.6mm Max
PA4793.501HLT
500
PA5121.XXXHL: 8.3 x 7.5 x 5.35mm Max
PA5121.201HLT
PA5121.231HLT
200
230
200
230
13
13
0.65 +/-0.15
0.65 +/-0.15
25
23
21
13
13
200
200
19.5
NOTES:
1.
Inductance measured at 100kHz, 100mVrms.For PA4793 the listed inductance is mea-
sured from 1-3 with pins 2,4 shorted
approximately 40°C when used in a typical application.
7. In high volt*time applications, additional heating in the component can occur due to
core losses in the inductor which may neccessitate derating the current in order to limit
the temperature rise of the component. To determine the approximate total losses (or
temperature rise) for a given application, the coreloss and temperature rise curves can
be used.
2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.
3. The rated current as listed is either the saturation current (25°C or 100°C) or the heating
current depending on which value is lower.
4. The nominal DCR is measured from point ① to point ② , as shown below on the
8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to industry
standard tape and reel specification EIA-481.
mechanical drawing. For PA4793 the listed DCR value is for each winding.
5. The saturation current is the typical current which causes the inductance to drop by 20%
(for PA4792 and PA4793) or 2% (for PA5121) at the stated ambient temperatures (25°C,
100°C ). This current is determined by placing the component in the specified ambient
environment and applying a short duration pulse current (to eliminate self-heating
effects) to the component.
Samples of these parts can be ordered by removing the HLT suffix and replacing with HL.
9. The temperature of the component (ambient plus temperature rise) must be within the
stated operating temperature range.
10. Hi-pot is measured from the bottom of the core to the leads. Hi-pot is tested for
2sec with a leakage current maximum of 0.1mA.
6. The heating current is the DC current which causes the part temperature to increase by
Power.PulseElectronics.com
P853.E (06/20)
1
SMT Power Inductors
Power Beads - PA4792.XXXHL, PA4793.XXXHL & PA5121 Series
POWER PRODUCTS
Mechanical
Schematic
PA4792.XXXHLT
Weight ...........................5.20grams
Tape & Reel ........................500/reel
6
Dimensions: mm
Unless otherwise specified,
all tolerances are 0.25
Mechanical
Schematic
PA4793.XXXHLT
14.6
Weight ...........................3.39grams
Tape & Reel ...................500/reel
2.6
Dimensions: mm
Unless otherwise specified,
all tolerances are 0.25
Power.PulseElectronics.com
P853.E (06/20)
2
SMT Power Inductors
Power Beads - PA4792.XXXHL, PA4793.XXXHL & PA5121 Series
POWER PRODUCTS
Mechanical
Schematic
PA5121.XXXHLT
1.7
7.90
1.7
Weight ...........................2.8grams
Tape & Reel ........................800/reel
Dimensions: mm
Unless otherwise specified,
all tolerances are 0.25
Power.PulseElectronics.com
P853.E (06/20)
3
SMT Power Inductors
Power Beads - PA4792.XXXHL, PA4793.XXXHL & PA5121 Series
POWER PRODUCTS
PA4792.231HL, LvsI, 25 °C/100 °C
300
280
260
240
220
200
180
160
140
120
100
0
10
20
30
40
50
60
70
80
90
100
Current (A)
At 100 ° C
At 25 ° C
PA4793.501HL, LvsI, 25 °C/100 °C
550
450
350
250
150
0
5
10
15
20
25
30
35
40
45
50
55
60
65
Current (A)
At 25 ° C
At 100 ° C
Power.PulseElectronics.com
P853.E (06/20)
4
SMT Power Inductors
Power Beads - PA4792.XXXHL, PA4793.XXXHL & PA5121 Series
POWER PRODUCTS
PA5121.201HLT, LvsI, 25C and 100C
0.25
0.20
0.15
0.10
0.05
0.00
0
5
10
15
20
25
30
35
40
45
50
Current (A)
.201HLT_25C
.201HLT_100C
Power.PulseElectronics.com
P853.E (06/20)
5
SMT Power Inductors
Power Beads - PA4792.XXXHL, PA4793.XXXHL & PA5121 Series
TAPE & REEL INFO
SURFACE MOUNTING TYPE, REEL/TAPE LIST
REEL SIZE (mm)
TAPE SIZE (mm)
QTY
PCS/REEL
500
TYPE
A
W1
W2
N
E
F
D0
1.5
1.5
1.5
P0
4
P1
16
16
12
P2
2
W
44
32
16
T
K0
7.9
7
PA4792.XXXHLT
PA4793.XXXHLT
PA5121.XXXHLT
Ø330 44.4
Ø330 32.4
50.4
38.4
32.4
100
100
100
1.75
1.75
1.75
20.2
14.2
7.5
0.5
0.5
0.4
4
2
500
Ø330
16.4
4.0
2
5.6
800
For More Information:
Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved.
Power.PulseElectronics.com
P853.E (06/20)
6
POWER PRODUCTS
相关型号：
©2020 ICPDF网 联系我们和版权申明