PA5119.XXXNLT [PULSE]
SMT Power Inductors;
| 型号： | PA5119.XXXNLT |
| 厂家： | 
PULSE A TECHNITROL COMPANY |
| 描述： | SMT Power Inductors |
| 文件： | 总4页 (文件大小：630K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT Power Inductors
Power Beads - PA5119.XXXNLT & PA5120.XXXNLT Series
POWER PRODUCTS
Compatible with Picor® Cool-Power®
Current Rating: Over 42Apk
Inductance Range: 0.42uH to 1.5uH
Height: 5.0mm Max (PA5119) and 6.9mm Max (PA5120)
Footprint: 12.7mm x 10.2mm Max (PA5119)
17.8mm x 14.4mm Max (PA5120)
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C 7
Saturation Current 5
Inductance1
@ 0ADC
(uH 10ꢀ%
Inductance2
@Irated
Irated 3
(ADC%
DCR 4
Heating Current6
(A TYP%
Part
Number
(A TYP%
(mΩ 10ꢀ
%
(uH TYP%
25°C
125°C
PA5119 Series (12.7 x 10.2 x 5.0mm Max%
PA5119.421NLT
PA5119.901NLT
PA5119.152NLT
0.42
0.90
1.50
0.42
0.90
1.50
16
14
12
3.15
4.60
6.00
42
28
21
38
25
20
16
14
12
PA5120 Series (17.8 x 14.4 x 6.9 mm Max%
PA5120.481NLT 0.48
0.48
32
1.7
55
47
32
NOTES:
1. Inductance measured at 100kHz, 100mVrms.
environment and applying a short duration pulse current (to eliminate self-heating
effects) to the component.
6. The heating current is the DC current which causes the part temperature to increase
by approximately 40°C when used in a typical application.
2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.
3. The rated current as listed is either the saturation current (25°C or 125°C) or the heat-
ing current depending on which value is lower.
4. The nominal DCR is measured from point
mechanical drawing.
①
to point ②, as shown below on the
7. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to
industry standard tape and reel specification EIA-481.
5. The saturation current is the typical current which causes the inductance to drop
by 5% (for PA5119) and 2% (for PA5120) at the stated ambient temperatures (25°C,
125°C). This current is determined by placing the component in the specified ambient
8. The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.
Mechanical
Schematic
PA5119.XXXHLT/PA5120.XXXHLT
3.7
7.2
4
5.4
2.7
9.0
2.4
5.4
2.0
2.0
2.9
3.0
Weight: PA5119 - 3.5grms
PA5120 - 6.7grms
Tape & Reel:
PA5119 - 650 reel
PA5120 - 300 reel
Dimensions: mm
Unless otherwise specified ,
all tolerances are 0.25
Power.PulseElectronics.com
P894.A (04/20)
1
SMT Power Inductors
Power Beads - PA5119.XXXNLT & PA5120.XXXNLT Series
POWER PRODUCTS
PA5119.421NLT, LvsI, 25C and 125C
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0.00
0
10
20
30
40
50
60
70
Current (A)
.421NLT_25C
.421NLT_125C
PA5119.901NLT, LvsI, 25C and 125C
1.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00
0
5
10
15
20
25
30
35
40
Current (A)
.901NLT_25C
.901NLT_125C
Power.PulseElectronics.com
P894.A (04/20)
2
SMT Power Inductors
Power Beads - PA5119.XXXNLT & PA5120.XXXNLT Series
POWER PRODUCTS
PA5119.152NLT, LvsI, 25C and 125C
1.60
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
0
5
10
15
20
25
30
35
Current (A)
.152NLT_25C
.152NLT_125C
PA5120.481NLT, LvsI, 25C and 125C
0.60
0.50
0.40
0.30
0.20
0.10
0.00
0
10
20
30
40
50
60
70
80
90
100
Current (A)
.481NLT_25C
.481NLT_125C
Power.PulseElectronics.com
P894.A (04/20)
3
SMT Power Inductors
Power Beads - PA5119.XXXNLT & PA5120.XXXNLT Series
TAPE & REEL INFO
PA5119.XXXNLT
PA5120.XXXNLT
For More Information:
Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved.
Power.PulseElectronics.com
P894.A (04/20)
4
POWER PRODUCTS
相关型号：
©2020 ICPDF网 联系我们和版权申明