PA5300.121HLT [PULSE]
SMT Power Inductors;型号: | PA5300.121HLT |
厂家: | PULSE A TECHNITROL COMPANY |
描述: | SMT Power Inductors |
文件: | 总4页 (文件大小:1137K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMT Power Inductors
Power Beads - PA5300.XXXHLT Series
Current Rating: Over 66Apk
Inductance Range: 120nH to 220nH
Height: 15.5mm Max
Footprint: 11mm x 10mm Max
Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C 7
Saturation Current5
(A TYP)
Inductance1
@ 0ADC
Inductance2
@Irated
Irated3
DCR4
Heating Current6
(A TYP)
Part
Number
(ADC)
(MAX)
(nH +/- 15%)
(nH TYP)
25°C
144
100°C
120
PA5300.121HLT
PA5300.221HLT
120
220
114
159
115
80
0.10
115
80
66
NOTES:
1. Inductance measured at 100kHz, 100mVrms.
7. In high volt*time applications, additional heating in the component can occur due
to core losses in the inductor which may neccessitate derating the current in order
to limit the temperature rise of the component. To determine the approximate total
losses (or temperature rise) for a given application, the coreloss and temperature rise
curves can be used.
2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.
3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat-
ing current depending on which value is lower.
2.
4. The nominal DCR is measured at point
drawing.
, as shown below on the mechanical
8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to
industry standard tape and reel specification EIA-481.
5. The saturation current is the typical current which causes the inductance to drop by
20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by
placing the component in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating effects) to the component.
6. The heating current is the DC current which causes the part temperature to increase by
approximately 40°C when used in a typical application.
The tape and reel for this product has a width (W=24mm), pitch (Po=16mm) and depth
(Ko=10.5mm). Samples of these parts can be ordered by removing the HLT suffix and
replacing with HL.
9. The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.
Schematic
Mechanical
PA5300.XXXHLT
PA5300.XXXHL
D/C CTRY
11 MAX
10 MAX
1
2
Weight:
2.2.74grms
15.5 MAX
Tape & Reel: 150/Reel
Dimensions: mm
d
0.10
2 SURFACES
Unless otherwise specified,
all tolerances are 0.25
2.
(4.3)
10.70
(6.5)
7.00
3.45
(2.6)
PulseElectronics.com
P907.A (04/21)
1
SMT Power Inductors
Power Beads - PA5300.XXXHLT Series
TAPE & REEL INFO
CIRCULAR HOLES
A
F
PA5300.XXXHL
D/C CTRY
W
1
K0
P1
A
SURFACE MOUNTING TYPE, REEL/TAPE LIST
TAPE SIZE
(mm)
REEL SIZE (mm)
QTY
TYPE
PA5300.XXXHLT
W
0.30 K0 0.1 P1 0.1
0.1
PCS/REEL
32.0
15.4
20.0
14.2
150
PulseElectronics.com
P907.A (04/21)
2
SMT Power Inductors
Power Beads - PA5300.XXXHLT Series
PA5300.121HLT, L vs I, Curve
PA5300.221HLT, L vs I, Curve
PulseElectronics.com
3
P907.A (04/21)
SMT Power Inductors
Power Beads - PA5300.XXXHLT Series
PA5300.XXHLT CoreLoss (W)
PA5300.XXXHLT Temp Rise vs Power Dissipation
For More Information:
Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved.
PulseElectronics.com
P907.A (04/21)
4
相关型号:
©2020 ICPDF网 联系我们和版权申明