PA5402.153NLT [PULSE]
High Current Molded Power Inductor;型号: | PA5402.153NLT |
厂家: | PULSE A TECHNITROL COMPANY |
描述: | High Current Molded Power Inductor |
文件: | 总4页 (文件大小:1770K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMT Power Inductor
High Current Molded Power Inductor - PA5402 & PM5402 Series
Height: 2.2mm Max
Footprint: 4.7mm x 4.31mm Max
Current Rating: up to 12A
Inductance Range: 0.1 to 22uH
High current, low DCR, and high efficiency
Shielded construction and compact design
Minimized acoustic noise and minimized leakage flux noise
200 Vdc Isolation Between Terminal and Core
Available in Commercial (PA) and Automotive (PM) grades
Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C
Rated3
DC
Saturation2
Current
Inductance5
100KHz, 1.0V
Current
Resistance
Commercial6,7
Automotive6,7
T Y P.
A
T Y P.
mΩ
3.2
MAX.
mΩ
4
T Y P.
A
uH 2ꢀ0
0.10*
0.18*
0.22*
0.33
0.47
0.56
0.68
1.0
PA54ꢀ2.1ꢀ1NLT
PA54ꢀ2.181NLT
PA54ꢀ2.221NLT
PA54ꢀ2.331NLT
PA54ꢀ2.471NLT
PA54ꢀ2.561NLT
PA54ꢀ2.681NLT
PA54ꢀ2.1ꢀ2NLT
PA54ꢀ2.122NLT
PA54ꢀ2.152NLT
PA54ꢀ2.222NLT
PA54ꢀ2.332NLT
PA54ꢀ2.472NLT
PA54ꢀ2.562NLT
PA54ꢀ2.682NLT
PA54ꢀ2.822NLT
PA54ꢀ2.1ꢀ3NLT
PA54ꢀ2.153NLT
PA54ꢀ2.223NLT
PM5402.101NLT
PM5402.181NLT
PM5402.221NLT
PM5402.331NLT
PM5402.471NLT
PM5402.561NLT
PM5402.681NLT
PM5402.102NLT
PM5402.122NLT
PM5402.152NLT
PM5402.222NLT
PM5402.332NLT
PM5402.472NLT
PM5402.562NLT
PM5402.682NLT
PM5402.822NLT
PM5402.103NLT
PM5402.153NLT
PM5402.223NLT
12
35
13.5
13
4.6
6.6
7.8
5.4
7. 3
8.6
14
28
24
18
10
8
11.2
13.5
16
12
7. 3
7
16
10
10
8.5
7.8
7
19
5
22
27
1.2
4.8
4.5
4
25
30
1.5
34.8
51
42
2.2
61
6
3.3
3.5
2.6
2.2
2.1
2
69
76
4
4.7
95
105
125
172
180
243
374
500
3.5
3
5.6
112
150
158
215
325
470
6.8
2.8
2.5
2.3
1.9
1.4
8.2
10
1.8
1.5
1.2
15
22
Power.PulseElectronics.com
P875. A (09/20)
1
SMT Power Inductor
High Current Molded Power Inductor - PA5402 & PM5402 Series
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
5. Please note that the inductance tolerance of all parts are 20%, except those
indicated by an * which are +/- 30%.
2. The saturation current is the current at which the initial inductance drops
approximately 30% at the stated ambient temperature. This current is determined
by placing the compnent in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating effect) to the component.
6. Parts shown in bold are standard catalog parts and are available through sample
stock and distribution. Parts in lighter font are available but are not necessarily held
in sample stock or distribution and lead times may be longer. Please contact Pulse for
availablity.
3. The rated current is the DC current required to raise the component temperature by 7. The PM prefix parts are AEC-Q200 qualified and has full automotive IATF16949
approximately 40�C. Take note that the components’ performance varies depending
on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
4. The part temperature (ambient+temp rise) should not exceed 125�C under worst
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application.
certification. The mechanical dimensions are 100% tested in production but do not
necessarily meet a product capability index (Cpk) 1.33 and therefore may not strictly
conform to PPAP.
8. Special characteristics
Mechanical
PA54ꢀ2/PM54ꢀ2
C
L
A
D
XXXNL
ꢀ D/C
G
SUGGESTED PAD LAYOUT
FINAL LAYOUT
Series
A
B
C
D
E
L
G
H
PA54ꢀ2/PM54ꢀ2
All Dimensions in mm.
4.45+/-0.25
4.06+/-0.25
1.8+/-0.2
0.76+/-0.3
2.0+/-0.2
5.2
2.2
2.4
Power.PulseElectronics.com
P875. A (09/20)
2
SMT Power Inductor
High Current Molded Power Inductor - PA5402 & PM5402 Series
TAPE & REEL INFO
W
A
K 0
P 1
G
Direction of tape
SURFACE MOUNTING TYPE, REEL/TAPE LIST
REEL SIZE (mm)
TAPE SIZE (mm)
QTY
A
G
P1
W
Kꢀ
PCS/REEL
PA54ꢀ2/PM54ꢀ2
Ø330
12.4
8
12
2.3
3000
Typical Performace Curves
PA54ꢀ2/PM54ꢀ2
PA5402.101NLT
PA5402.181NLT
PA5402.221NLT
PA5402.331NLT
PA5402.471NLT
PA5402.561NLT
Power.PulseElectronics.com
P875. A (09/20)
3
SMT Power Inductor
High Current Molded Power Inductor - PA5402 & PM5402 Series
ꢀAꢁꢂꢃꢄꢅꢆꢇꢈꢉꢊꢋ
ꢀAꢁꢂꢃꢄꢅꢆꢁꢄꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢂꢆꢄꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢆꢄꢄꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢄꢄꢆꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢆꢃꢄꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢄꢄꢄꢆꢇꢈ
ꢀAꢁꢂꢃꢄꢅꢁꢆꢄꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢆꢃꢇꢈꢉꢊ
ꢀAꢁꢂꢃꢄꢅꢆꢄꢄꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢆꢆꢄꢇꢈꢉ
ꢀAꢁꢂꢃꢄꢅꢆꢇꢄꢈꢉꢊ
ꢀAꢁꢂꢃꢄꢅꢆꢁꢇꢈꢉꢊ
For More Information:
Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved.
Power.PulseElectronics.com
P875. A (09/20)
4
相关型号:
©2020 ICPDF网 联系我们和版权申明