PE-0201FB220ST [PULSE]
FERRITE BEAD 22 OHM 0201 1LN;
| 型号： | PE-0201FB220ST |
| 厂家： | 
PULSE A TECHNITROL COMPANY |
| 描述： | FERRITE BEAD 22 OHM 0201 1LN |
| 文件： | 总15页 (文件大小：1700K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Chip Ferrite Beads
GHz Applications - 0402HFB & 0603HFB Series
Single - 0603FB & 0805FB Series
Power - 0603PFB, 0805PFB, 1206PFB & 1806PFB Series
Pulse Electronics helps you connecting the wireless world
Table of Contents
The Pulse Electronics 0402 ~ 1806 series ranges of Miniature Ferrite beads contains the very latest in multi layer
ferrite beads technology, thus providing the ultimate in performance demanded by today's high Speed EMI
noise filtering productsꢀ The ferrite beads are in an industry standard size and footprintꢀ
Ferrite beads ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2
Parts number Legendꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2
Competitor Cross ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3
Reliability and Test Condition ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3-5
Derating Curve ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5
Product Specifications
Soldering ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 5
Lead Free Solder re-flow ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 6
Solder Iron ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 6
Solder Volume ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 6
Packaging Information ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
Reel Dimension ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
Qty/reel ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
Tearing Off Force ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
Application Notes ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 8
Ferrite Bead EMI Suppressor
Single Type - 0402FB, 0603FB & 0805FB Series ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 9-10
Single GHz Type - 00402HFB & 0603HFB Series ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 11-12
Power Type - 0603PFB, 0805PFB, 1206PFB, & 1806PFB Series ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 13-14
WC706.J (10/20)
Networking.PulseElectronics.com
1
CHIP FERRITE BEADS
1ꢀ0 Ferrite Beads
It is known as absorptive beads, is more lossy and make good power filter networks because they are designed
to absorb high-frequency noise currents and dissipate it as heatꢀ These beads have high impedance over wide high-
frequency bands, making them ideal as low-pass noise filtersꢀ
Structure
FREQUENCY (MHz)
Z = Impedance (ohm)
R = Real Part (resistance)
X = imaginary Part (inductance)
Application
Vcc
Ferrite Bead
+
-
Ferrite
Bead
Chipchoke™
Common Mode
Noise suppression
2ꢀ0 Parts Number Legend
PE-0201
FB
121
S
T
A
PACKAGE STYLE
CORE MATERIAL
Impedance (Ω)
TOLERANCE *
PACKAGE
Enhanced
0402, 0603,
0805, 1206
1806
FB = Ferrite Bead
121=120 Ω
J = ±5%
S = ±25%
T = Tape & Reel
A = Alternative
HFB = High Frequency Ferrite Bead
PFB = High Current Ferrite Bead
X = not apply
* There is no tolerance option for these products.
WC706.J (10/20)
Networking.PulseElectronics.com
2
CHIP FERRITE BEADS
3ꢀ0 Competitor Cross
ITEM
Pulse
TAIYO YUDEN
TDK
MURATA
Ferrite Bead Single
FB Series
BK & FBM Series
MMZ Series
BLMxxAG Series
BLMxxBD Series
BLMxxAX Series
BLMxxH Series
BLMxxPG Series
GHz Ferrite Beads Single
Power Ferrite Bead Single
HFB Series
PFB Series
FBMH Series
MMZ1005-E Series
4ꢀ0 Reliability and Test Condition
Item
Performance
Test Condition
Series No.
PE-0402FB/0603FB/0805FB/0402HFB/0603HFB/
-40 ~+105�C
Operating
Temperature
Transportation
Storage
(Including self-temperature rise)
-40 ~+125�C
Temperature
Impedance (Z)
Inductance (Ls)
Q Factor
Refer to standard electrical characteristics list
Agilent4291
AgilentE4991
Agilent4287
DC Resistance
Rated Current
Agilent16192
Agilent4338
DC Power Supply
Over Rated Current requirements
1. Applied the allowed DC current
2. Temperature measured by digital surface thermometer
Preheat: 150�C, 60sec
Temperature Rise
Test
Rated Current < 1A ∆T 20�C Max
Rated Current ≥ 1A ∆T 20�C Max
Resistance to
Soldering Heat
Appearance: No damage
Impedance: Within ±15% of initial value
Inductance: Within ±10% of initial value
Q: Shall not exceed the specification value.
RDC: Shall not exceed the specification value.
Solder: Sn99.5%-Cu0.5%
Solder temperature: 260±5�C
Flux for lead free: Rosin.9.5%
Temperature ramp/immersion and immersion rate: 25±6 mm/s
Dip time: 10±1sec.
Preheating Dipping Natural Cooling
Depth: completely cover the termination.
260ƱC
150ƱC
10Ʋ1.0
second
60
second
WC706.J (10/20)
Networking.PulseElectronics.com
3
CHIP FERRITE BEADS
4ꢀ0 Reliability and Test Condition
Item
Performance
Test Condition
Solderability
More than 95% of the terminal electrode should be covered with solder Preheat: 150�C, 60sec
Solder: Sn99.5%-Cu0.5%
Preheating Dipping Natural Cooling
Solder temperature: 245±5�C
245ƱC
Flux for lead free: Rosin.9.5%
Depth: completely cover the termination.
150ƱC
4Ʋ1.0
second
60
second
Dip time: 4±1sec.
Terminal strength
Appearance: No damage.
Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC
J-STD-020D Classification Reflow Profiles)
Impedance: within±15% of initial value
Inductance: within±10% of initial value
Q: Shall not exceed the specification value.
Component mounted on a PCB apply a force
RDC: Shall not exceed the specification value.
(>0805:1kg<=0805:0.5kg) to the side of a device being tested. This
force shall be applied for 60 +1 econds. Also the force shall be ap-
plied gradually as not to shock the component being tested.
Bending
Appearance: No damage.
Shall be mounted on a FR4 substrate of the
Following dimensions: >=0805:40x100x1.2mm
<0805:40x100x0.8mm
Impedance: within ±10% of initial value
Inductance: within ±10% of initial value
Q: Shall not exceed the specification value
RDC: Shall not exceed the specification value
Bending depth: >=0805:1.2mm
Duration of 10 sec for a min.
Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC
Vibration Test
Appearance: No damage.
J-STD-020D Classification Reflow Profiles)
~ ~
Impedance: within ±15% of initial value
Inductance: within ±10% of initial value
Q: Shall not exceed the specification value
Oscillation Frequency: 10 2K 10Hz for 20 minutes
Equipment: Vibration checker
Total Amplitude: 1.52mm ±10%
RDC: within ±15% of initial value and shall not exceed the specification Testing Time: 12 hours (20 minutes 12 cycles each of 3 orientations).
value
Shock
Appearance: No damage.
Test condition:
Impedance: within ±15% of initial value
Inductance: within ±10% of initial value
Q: Shall not exceed the specification value
RDC: within ±15% of initial value and shall not exceed the
Type
Peak
Normal
Value duration
(g’s) (D) (ms)
Velocity
change
(Vi)ft/sec
15.4
Wave
form
SMD
1,500
100
0.5
6
Half-sine
Half-sine
Lead
12.3
specification value
WC706.J (10/20)
Networking.PulseElectronics.com
4
CHIP FERRITE BEADS
Life Test
Appearance: No damage.
Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC
J-STD-020D Classification Reflow Profiles)
Temperature: 125±2�C(bead),
Impedance: within ±15% of initial value
Inductance: within ±10% of initial value
Q: Shall not exceed the specification value
RDC: within ±15% of initial value and shall not exceed the
specification value
85±2�C(inductor)
Applied current: rated current
Duration: 1000±12hrs.
Measured at room temperature after placing for 24±2 hrs.
Load Humidity
Thermal Shock
Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC
J-STD-020D Classification Reflow Profiles)
Humidity: 85±2%R.H.
Temperature: 85±2�C
Duration: 1000hrs Min. with 100% rated current.
Measured at room temperature after placing for 24±2 hrs.
Preconditioning: Run through IR reflow for 2 times. (IPC/JEDEC
J-STD-020D Classification Reflow Profiles)
Condition for 1 cycle
Appearance: no damage
Impedance: within ±15% of initial value
Inductance: within ±10% of initial value
Q: Shall not exceed the specification value
RDC: Shall not exceed the specification value
Step1: -40±2�C 30±5 min.
Step2: 25±2�C≤30±0.5 min.
Step3: +105±2�C 30±5 min.
Number of cycles: 500
Measured at room temperature after placing for 24±2 hrs.
Chip Inductor Only
Insulation
Resistance
IR>1GΩ
Test Voltage: 100±10%V for 30Sec
5ꢀ **Derating Curve
For the ferrite chip bead which withstanding current
over 1ꢀ5A, as operating temperature over 85�C, the
derating current information is necessary to considerꢀ
For the detail derating of current, please refer to the
Derated Current vsꢀ perating Temperature curveꢀ
6ꢀ Soldering
Mildly activated rosin fluxes are preferredꢀ The termination are suitable for re-flow soldering systemsꢀ If hand
soldering cannot be avoided, the preferred technique is the utilization of hot air soldering toolsꢀ
Noteꢀ If wave soldering is used, there will be some riskꢀ Re-flow soldering temperatures below 240 degrees, there will
be non-wetting riskꢀ
WC706.J (10/20)
Networking.PulseElectronics.com
5
CHIP FERRITE BEADS
6ꢀ1 Lead Free Solder re-flow
Recommended temperature profiles for lead free re-flow soldering in Figure 1ꢀ Reflow times: 3 times max
Pre-heating
Soldering
Natural Cooling
TP (260ƱC / 10s max.)
tp (245ƱC / 20~40s.)
217
60~150s
200
150
60~180s
480s max.
TIME( sec.)
Figure 1
6ꢀ2 Solder Iron
Pre-heating
Soldering
Natural Cooling
Within 4~5s
350
150
Over 60s
Gradual Cooling
TIME( sec.)
Figure 2 (1 time max)
Products attachment with a soldering iron is discouraged due to the inherent process control limitationsꢀ If a
soldering iron must be employed the following precautions are recommendedꢀ For Iron Soldering in Figure 2ꢀ
• Preheat circuit and products to 150�C • Never contact the ceramic with
• Use a 20 watt soldering iron
with tip diameter of 1ꢀ0mm
• Limited soldering time to
4~5sec
the iron flip
• 350�C tip temperature (max)
• 1ꢀ00mm tip diameter (max)
6ꢀ3 Solder Volume
Accordingly increasing the solder volume, the mechanical
stress to product is also increasedꢀ Exceeding solder
volume may cause the failure of mechanical or electrical
performanceꢀ Solder shall be used not to be exceed as
shown in the right side:
Minimum fillet height = soldering thickness + 25% product
height
WC706.J (10/20)
Networking.PulseElectronics.com
6
CHIP FERRITE BEADS
7ꢀ Packaging Information
7ꢀ1 Reel Dimension
A
2Ʋ0.5
120Ʊ
D
C
B
7"x8mm
Type
7”x8mm
A(mm)
B(mm)
C(mm)
13±0.2
D(mm)
10.0±1.5
50 or more
178±2
7ꢀ2 Qty/reel
Chip Size
PE-0402HFB
PE-0402FB
PE-0603FB
PE-0603HFB
PE-0603PFB
PE-0805FB
PE-0805PFB
PE-1206PFB
PE-1806PFB
Chip/Reel
Reel Diameter
10000
10000
4000
4000
4000
4000
4000
3000
3000
178 x 8mm
178 x 8mm
178 x 8mm
178 x 8mm
178 x 8mm
178 x 8mm
178 x 8mm
178 x 8mm
178 x 8mm
7ꢀ3 Tearing Off Force
The force for tearing off cover tape is 15 to 60 grams in the
arrow direction under the following conditionsꢀ
Room Temp.
(C)
Room Humidity
(%)
Room atm
(hPa)
Tearing Speed
mm/min
5 35
~
45 85
~
860 1060
300
~
WC706.J (10/20)
Networking.PulseElectronics.com
7
CHIP FERRITE BEADS
Application Notice
*Storage Conditions
To maintain the solder ability of terminal electrodes:
1. Products meet IPC/JEDEC J-STD-020E standard-MSL, level 1.
2. Temperature and humidity conditions: Less than 40�C and 60% RH.
3. Recommended products should be used within 12 months from the time of delivery.
4. The packaging material should be kept where no chlorine or sulfur exists in the air.
* Transportation
1. Products should be handled with care to avoid damage or contamination from perspiration and skin oils.
2. The use of tweezers or vacuum pick up is strongly recommended for individual components.
3. Bulk handling should ensure that abrasion and mechanical shock are minimized.
WC706.J (10/20)
Networking.PulseElectronics.com
8
FERRITE BEAD EMI SUPPRESSOR
SINGLE TYPE - FB SERIES FOR GENERAL SIGNAL LINE
Signal Line EMI Suppression
Monolithic inorganic material contstruction
Various impedance and frequency application
Industry Standard package
Electrical Specifications @ 25°C
Part
Number
Impedance
(Ω)
Test Frequency
DC Resistance
(Ω) max.
Rated Current (mA)
Tolerance
(MHz)
max.
PE-0402RFB100ST
PE-0402FB121ST
PE-0402FB601ST
PE-0402FB102ST
PE-0603FB121ST
PE-0603FB221ST
PE-0603FB601ST
PE-0603FB102ST
PE-0805FB121ST
PE-0805FB601ST
PE-0805FB102ST
0˜15
120
-
100
100
100
100
100
100
100
100
100
100
100
0.03
0.2
1000
550
300
300
500
500
500
400
800
500
500
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
600
1000
120
0.55
0.58
0.18
0.25
0.38
0.5
220
600
1000
120
0.15
0.3
600
1000
0.4
Mechanicals
Application
PE-0402/0805FB
B
X
A
W
Y
SUGGESTED LAND PATTERN
Unit: mm
Dimension:
Imperial Size
A
B
W
T
X
Y
Z
0402
0603
1.0 0.15
1.6 0.15
0.25 0.1
0.3 0.2
0.5 0.3
0.5 0.15
0.8 0.15
1.25 0.2
0.5 0.15
0.8 0.15
0.85 0.2
1.25~1.55
1.8~2.4
0.45~0.55
0.6~0.8
0.8~1.2
0.4~0.6
0.6~0.8
0.9~1.6
0805
2.0(+0.3, -0.1)
2.4~3.6
All units in mm
WC706.J (10/20)
Networking.PulseElectronics.com
9
FERRITE BEAD EMI SUPPRESSOR
SINGLE TYPE - FB SERIES FOR GENERAL SIGNAL LINE
Impedance Frequency Characteristics (Typical)
PE-0402RFB100ST
PE-0402FB121ST
PE-0402FB601ST
700
600
500
400
300
200
100
0
16
12
8
160
140
120
100
80
Z
Z
Z
R
R
R
60
X
4
40
X
X
20
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE-0402FB102ST
PE-0603FB121ST
PE-0603FB221ST
180
1200
1000
800
600
400
200
0
300
250
200
150
100
50
Z
Z
160
140
120
100
80
Z
R
X
R
X
R
60
40
X
20
0
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE-0603FB601ST
PE-0603FB102ST
PE-0805FB121ST
160
140
120
100
80
700
600
500
400
300
200
100
0
1200
1000
800
600
400
200
0
Z
Z
Z
R
X
R
R
60
40
X
X
20
1
10
100
1000
10000
1
10
100
1000
10000
0
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE-0805FB601ST
PE-0805FB102ST
700
600
500
400
300
200
100
0
1200
1000
800
600
400
200
0
Z
Z
R
R
X
X
1
10
100
1000
10000
1
10
100
1000
10000
WC706.J (10/20)
Networking.PulseElectronics.com
10
FERRITE BEAD EMI SUPPRESSOR
SINGLE TYPE FOR HIGH FREQUENCY APPLICATION
Signal Line EMI Suppression
Monolithic inorganic material construction
Various impedance and frequency application
High Frequency Giga Hz Application
Industry Standard package
Electrical Specifications @ 25°C
Part
Number
Impedance
(Ω)
Test Frequency
Impedance (Ω)
1GHz mini
DC Resistance
(Ω) max.
Rated Current (mA)
Tolerance
(MHz)
max.
PE-0402HFB221ST
PE-0402HFB601ST
PE-0402HFB102ST
PE-0402HFB102STA
PE-0402HFB152ST
PE-0402HFB182ST
PE-0603HFB601ST
PE-0603HFB102ST
220
600
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
100
100
100
100
100
100
100
100
250
840
1200
900
-
0.25
0.85
1.25
1.1
700
300
250
250
200
200
500
100
1000
1000
1500
1800
600
1.50
2.0
-
450
750
0.35
1.6
1000
Mechanical
PE-XXXXHFB
PCB LAYOUT
B
X
N
A
W
Y
SUGGESTED LAND PATTERN
Unit: mm
Dimension:
Imperial Size
0402
A
B
W
T
X
Y
Z
1.0 0.15
1.6 0.15
0.25 0.1
0.3 0.2
0.5 0.15
0.8 0.15
0.5 0.15
0.85 0.2
1.25~1.55
1.8~2.4
0.45~0.55
0.6~0.8
0.45~0.55
0.6~0.8
0603
All units in mm
WC706.J (10/20)
Networking.PulseElectronics.com
11
FERRITE BEAD EMI SUPPRESSOR
SINGLE TYPE FOR HIGH FREQUENCY APPLICATION
Impedance Frequency Characteristics (Typical)
PE-0402HFB221ST
PE-0402HFB601ST
PE-0402HFB102ST
350
300
250
200
150
100
50
2000
1600
1200
800
400
0
2400
1800
1200
600
0
Z
Z
R
Z
X
X
X
R
100
R
100
0
1
10
100
1000
10000
1
10
1000
10000
1
10
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE-0402HFB102STA
PE-0402HFB152ST
PE-0402HFB182ST
4000
3000
2000
1000
0
5000
4000
3000
2000
1000
0
1600
1400
1200
1000
800
600
400
200
0
Z
R
Z
Z
X
X
X
R
100
R
1
10
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE-0603HFB601ST
PE-0603HFB102ST
900
800
700
600
500
400
300
200
100
0
1800
1600
1400
1200
1000
800
600
400
200
0
Z
Z
R
R
X
X
1
10
100
1000
10000
1
10
10000
Frequency (MHz)
Frequen1c0y0 (MHz) 1000
WC706.J (10/20)
Networking.PulseElectronics.com
12
FERRITE BEAD EMI SUPPRESSOR
SINGLE TYPE FOR POWER LINE APPLICATION
Power Line EMI Suppression
Monolithic inorganic material construction
Various impedance and frequency application
Industry Standard package
Electrical Specifications @ 25°C
Part
Impedance
Test Frequency
DC Resistance
Rated Current (mA)
Tolerance
Number
(Ω)
(MHz)
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
(Ω) max.
max.
PE-0603PFB121ST
PE-0603PFB181ST
PE-0603PFB221ST
PE-0603PFB471ST
PE-0603PFB600ST
PE-0603PFB300ST
PE-0603PFB260ST
PE-0805PFB121ST
PE-0805PFB221ST
PE-0805PFB331ST
PE-0805PFB600ST
PE-1206PFB121ST
PE-1206PFB500ST
PE-1206PFB601ST
PE-1806PFB600ST
PE-1806PFB720ST
120
180
220
470
60
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
±25%
0.05
0.09
0.05
0.2
2000
1500
2200
1000
3000
5000
6000
3000
2000
1500
0.04
0.02
0.01
0.03
0.07
0.1
30
26
120
220
330
60
0.025
0.03
0.03
0.1
3000
3000
3000
2000
6000
6000
120
50
600
60
0.01
0.04
72
Mechanical
PE-XXXXPFB
B
PCB LAYOUT
X
A
W
N
Y
SUGGESTED LAND PATTERN
Unit: mm
Imperial Size
0603
A
B
W
T
X
Y
Z
1.6±0.15
2.0 (+0.3, -0.1)
3.2±0.2
0.3±0.2
0.5±0.3
0.5±0.3
0.5±0.3
0.8±0.15
1.25±0.2
1.6±0.2
1.6±0.2
0.85±0.2
0.85±0.2
0.85±0.2
1.6±0.2
1.8˜2.4
2.4˜3.6
3.8˜5.5
5.3˜6.7
0.6˜0.8
0.6˜0.8
0.9˜1.6
1.2˜2.0
0.9˜1.6
0805
0.8˜1.2
1.8˜2.5
2.4˜3.2
1206
1806
4.5±0.2
All units in mm
WC706.J (10/20)
Networking.PulseElectronics.com
13
FERRITE BEAD EMI SUPPRESSOR
SINGLE TYPE FOR POWER LINE APPLICATION
Impedance Frequency Characteristics (Typical)
PE-0603PFB221ST
PE-0603PFB600ST
PE-0603PFB121ST
PE-0603PFB181ST
300
250
200
150
100
50
300
250
200
150
100
50
160
120
200
150
100
50
Z
Z
Z
R
R
X
R
80
40
Z
X
X
X
R
0
0 1
0
1
10
100
1000
10000
0
10
100
1000
3000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE- 0603PFB471ST
PE-0603PFB260ST
PE-0603PFB300ST
PE-0805PFB121ST
160
120
80
120
40
600
500
400
300
200
100
0
Z
90
60
30
0
R
30
20
10
0
Z
R
X
Z
Z
X
40
X
R
X
R
0
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
1
10
100
1000
3000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE-0805PFB331ST
PE-0805PFB221ST
PE-0805PFB600ST
PE-1206PFB121ST
300
250
200
150
100
50
100
200
450
400
350
300
250
200
150
100
50
Z
Z
80
60
40
20
0
Z
150
100
50
Z
R
R
X
R
X
R
X
X
0
1
10
100
1000
10000
0 1
0
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
PE-1206PFB500ST
PE-1806PFB720ST
PE-1806PFB600ST
PE-1206PFB601ST
100
800
100
100
80
60
40
20
0
700
600
500
400
300
200
100
0
80
60
40
20
0
Z
Z
Z
80
60
40
20
0
Z
R
R
R
X
R
X
X
X
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
1
10
100
1000
10000
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
Frequency (MHz)
For More Information
Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved.
WC706.J (10/20)
Networking.PulseElectronics.com
14
相关型号：
©2020 ICPDF网 联系我们和版权申明