PE-1210CCMC271STS [PULSE]
SMD CHIP CHOKES Wire-Wound Series;型号: | PE-1210CCMC271STS |
厂家: | PULSE A TECHNITROL COMPANY |
描述: | SMD CHIP CHOKES Wire-Wound Series |
文件: | 总4页 (文件大小:1125K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMD CHIP CHOKES
Wire-Wound Series
Wire wound Ferrite 1210 (3225) core
Common Mode Noise suppression without
attenuating the signal
Magnetically shielded for low Rdc and High
Current
Perfect for USB2.0/3.0, IEEE1349 Fire wire
and other LVDS lines
Ideal for DC voltage supply lines for Power
over Ethernet -PoE/PoE+
PART NUMBER LEGEND
PE —1210CCMC XXXS T S
TERMINATION
IMPEDANCE
PACKAGE STYLE
1210
S = Tin plating
Representative of
the impedance
value
CORE MATERIAL/RANGE
CCMC - FERRITE CHIP CHOKE
STYLE
PACKAGING
T = Tape & Reel
Reel Size
S = Standard Range
Parts per Reel = 3000
1
Networking.PulseElectronics.com
W719.A (7/18)
WIRE-WOUND CHIP CHOKES
SPECIFICATION
Electrical Specifications @ 25°C
Common Mode
Part Number
DC
Rated
Voltage
(Vdc)
Rated
Current
(mA MAX)
Withstanding
Voltage
Insulation
Resistance
(MΩ MIN)
Impedance
Resistance
(25%)
@ 100MHz (Ω)
(Ω MAX)
(Vdc)
PE-1210CCMC161STS
PE-1210CCMC271STS
PE-1210CCMC601STS
PE-1210CCMC102STS
160
270
0.15
0.25
0.12
0.35
50
50
50
50
680
640
1000
480
125
125
125
125
10
10
10
10
600
1000
Mechanical
1.8
2.5
3.2
4.00
(0.8)
(0.8)
0.9
2.70
0.9
0.9
2.20
Impedance vs Frequency
10000
1000
100
10
COMMON MODE
PꢀꢁꢂꢃCT ꢄEꢅ
PEꢆ1210CCMC1ꢇ1STS
PEꢆ1210CCMC2ꢈ1STS
PEꢆ1210CCMCꢇ01STS
PEꢆ1210CCMC102STS
1
DIFFERENTIAL MODE
0.1
1
10
100
1000
10000
Frequency (MHz)
2
W719.A (7/18)
Networking.PulseElectronics.com
WIRE-WOUND CHIP CHOKES
PERFORMANCE TESTING
Electrical Testing
Storage and Operating
Temperature Range:
Inductors are subjected to the
extremes for 48 hours.
-40° to +85°C
Then tested at 25°C
There shall be no deformation
or change in appearance
Inductors are subjected to 30 cycles
for 30 minutes at each extreme.
Thermal:
Inductance shall not change
by more than 5%
-40° to +85°C
Then tested at 25°C
Q values shall not change
by more than 10%
Inductors are subjected to
10 cycles of 24 hours at 70°C with
90 to 95% Relative Humidity
Moisture Resistance
Operating Life
Then tested at 25°C
Inductors are subjected to
1000 hours at 85°C with 85%
Relative Humidity with
There shall be no Damaged,
Open or Shorted Windings
the rated current applied
Mechanical Testing
There shall be no deformation
or change in appearance
Inductors are subjected to the following:
Inductance shall not change
by more than 5%
Temperature Range:
Use a solder pot at 260C, with RMA Flux. Each
termination is immersed in 63Sn/37Pb molten solder
for 4 to 6 seconds.
Q values shall not change
by more than 10%
Recommended Solder
Heat Resistance Profile
3
W719.A (7/18)
Networking.PulseElectronics.com
WIRE-WOUND CHIP CHOKES
TAPE AND REEL SPECIFICATIONS
12.8
2.3 + 0.2/-0
13.0
2.2
Tape Dimensions (mm)
Parts per
Reel
Series
W
P1
P2
P3
H
T
1210CCMC
3000
12
2
8
4
2.3
0.3
For More Information:
Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may
be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.
4
W719.A (7/18)
Networking.PulseElectronics.com
相关型号:
©2020 ICPDF网 联系我们和版权申明