PG0084.651 [PULSE]
SMT Power Inductors;型号: | PG0084.651 |
厂家: | PULSE A TECHNITROL COMPANY |
描述: | SMT Power Inductors 功率感应器 电感器 |
文件: | 总3页 (文件大小:488K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
SMT Power Inductors
Flat Coils - PG0077NL and PG0084NL Series
Height: 6.5mm Max (PG0077) and 4.40mm
Max (PG0084)
Footprint: 14.5mm x 13.0mm Max
Current Rating: up to 45A
Inductance Range: 0.38µH to 2.65µH
Electrical Specifications @ 25°C - Operating Temperature -40°C to +95°C1
Core Loss6
Factor
Inductance2
@ Irated
(µH TYP)
Inductance
@0ADC
(µH 20%)
Saturation4
Current
Isat (A)
Heating5
Current IDC
(A)
Part8,9
Number
Irated3
(A)
DCR (mΩ)
TYP
0.75
1.20
2.00
2.80
4.10
1.30
2.30
3.60
MAX
0.80
1.30
2.10
K1
K2
PG0077.401NL
PG0077.801NL
PG0077.142NL
PG0077.202NL
PG0077.282NL
PG0084.351NL
PG0084.651NL
PG0084.112NL
0.34
0.68
1.16
45
35
27
23
19
0.45
0.80
1.40
2.00
2.80
0.35
0.65
1.10
48
38
28
24
20
40
32
24
45
35
27
23
19
1.68E-9
1.68E-9
1.68E-9
1.68E-9
1.68E-9
1.27E-9
1.27E-9
1.27E-9
33.5
42.5
57.8
67.6
80.1
28.7
38.1
50.1
1.66
2.32
0.28
0.52
0.88
2.90
4.20
1.80
2.80
4.20
40
32
24
61
45
34
Notes:
1. The temperature of the component (ambient plus temperature rise) muse be within
thestandard operating temperature range.
6. Core Loss approximation is based on published core data:
Core Loss = K1*(f)1.035 *(K2ΔI)2.263
2. Inductance at Irated is a typical inductance value for the component taken at rated
current.
Where: Core Loss = in Watts
f = switching frequency in kHz
3. The rated current listed is the lower of the saturation current @ 25°C or the heating
current.
K1 & K2 = core loss factors
ΔI = delta I across the component in Ampere
4. The saturation current, ISAT, is the current at which the component inductance drops
by 20%(typical) at an ambient temperature of 25°C. This current is determined by
placing the component in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating effects) to the component.
5. The heating current, IDC, is the DC current required to raise the component tempera-
ture by approximately 40°C. The heating current is determined by mounting the
component on a typical PCB and applying current for 30 minutes. The temperature is
measured by placing the thermocouple on top of the unit under test. Take note that
the component’s performance varies depending on the system condition. It is sug-
gested that the component be tested at the system level, to verify the temperature
rise of the component during system operation.
K2ΔI = one half of the peak to peak flux density
across the component in Gauss
7. Unless otherwise specified, all testing is made at 100kHz, 0.1VAC.
8. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part
number (i.e. PG0077.401NL becomes PG0077.401NLT). Pulse complies to industry
standard tape and reel specification EIA481.
* Contact Pulse for availability
power.pulseelectronics.com
SPM2007_37 (02/19) http://www.power.pulseelectronics.com/contact
1
SMT Power Inductors
Flat Coils - PG0077NL and PG0084NL Series
Mechanical
Schematic
PG0077.XXX, PG0084.XXX
PG0077
PG0084
Weight ..............5.5 grams ...........3.5 grams
Tape & Reel .......300/reel .............400/reel
Dimensions:.Inches
mm
Unless otherwise specified,
..010
all tolerances are:
0,25
Max. Length Max. Height Max. Height
“X” (in./mm) “Y” (in./mm) “Z” (in./mm)
Part Number
PG0077.401
PG0077.801
PG0077.142
PG0077.202
PG0077.282
PG0084.351
PG0084.651
PG0084.112
.571/14,50
.571/14,50
.551/14,00
.551/14,00
.551/14,00
.551/14,00
.551/14,00
.543/13,80
.256/6,50
.256/6,50
.256/6,50
.256/6,50
.256/6,50
.173/4,40
.173/4,40
.173/4,40
.276/7,00
.276/7,00
.276/7,00
.276/7,00
.276/7,00
.173/4,40
.173/4,40
.173/4,40
power.pulseelectronics.com
SPM2007_37 (02/19) http://www.power.pulseelectronics.com/contact
2
SMT Power Inductors
Flat Coils - PG0077NL and PG0084NL Series
Inductance vs Current Characteristics
For More Information
Pulse Worldwide Headquarters
15255 Innovation Drive Ste 100
San Diego, CA 92128
Pulse Europe
Pulse China Headquarters
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen,
P.R. China 518057
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Pulse South Asia
3 Fraser Street 0428
DUO Tower
Pulse North Asia
1F., No.111 Xiyuan Road
Zhongli District
Taoyuan City 32057
Taiwan (R.O.C)
Pulse Electronics GmbH
Am Rottland 12
58540 Meinerzhagen
Germany
U.S.A.
Singapore 189352
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Tel: 86 755 33966678
Fax: 86 755 33966700
Tel: 65 6287 8998
Fax: 65 6280 0080
Tel: 886 3 4356768
Fax: 886 3 4356820
Tel: 86 21 62787060
Fax: 86 2162786973
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned
herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.
power.pulseelectronics.com
SPM2007_37 (02/19) http://www.power.pulseelectronics.com/contact
3
相关型号:
©2020 ICPDF网 联系我们和版权申明