PG0926NL [PULSE]
SMT Power Inductor;
| 型号： | PG0926NL |
| 厂家： | 
PULSE A TECHNITROL COMPANY |
| 描述： | SMT Power Inductor |
| 文件： | 总3页 (文件大小：409K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT Power Inductor
Round Wire Coils - PG0926NL series
Inductance Range: 0.46µH to 22.0µH
Current Rating: up to 50Apk
Footprint: 13.4mm x 13.4mm Max
Height: 8.0mm Max
No Thermal Aging
Electrical Specifications @ 25°C - Operating Temperature -40°C to 130°C¹
CONTROLLED ELECTRICAL SPECS
SATURATION5
CURRENT Isat
(A TYP)
Inductance
@ Irated²
Irated ³
HEATING6 CORE LOSS7
CURRENT Idc FACTOR
Part Number
(A)
µH TYPICAL
DCR4
(mΩ)
±12%
INDUCTANCE
@0Adc
(µ ±20%)
(A TYP)
(K2)
25°C
100°C
40
27
21
PG0926.461NL
PG0926.102NL
PG0926.182NL
PG0926.282NL
PG0926.562NL
PG0926.722NL
PG0926.872NL
PG0926.113NL
PG0926.153NL
PG0926.223NL
0.42
0.94
1.7
44
30
22
19
14
12
11
0.55
1.2
0.46
1.00
50
34
44
30
22
19
32.9
47.6
2.2
2.9
4.1
1.80
25
64.3
80.0
114.3
128.6
138.1
157.1
2.6
5.0
6.8
2.80
5.60
7. 20
20
14
16
11.5
10
9
14.5
12
7.0
12.5
11.5
10.5
9
8.4
10.6
13.5
20
8.0
12.0
12.5
21.0
8.70
11.50
15.00
22.00
11
9.5
8
8
9.5
8
7
194.8
224.5
7
7.5
6
7
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
rise of the component during system operation.
Core loss approximation is based on published core data:
Core Loss = K1 * (f)1.72 * (K2ΔI)2.41in mW
K1 = 8.68E - 10
7.
2. Inductance at Irated is a typical inductance value for the component taken at rated
current.
3. The rated current listed is either the saturation current (@ 25°C) or the heating cur-
rent depending on which value is lower.
f = switching frequency in KHz
K1 & K2 = core loss factors
4. The DCR of the part is measured at an ambient temperature of 20°C ± ± °C±from
point a to b as shown below on the mechanical drawing.
ΔI = delta I across the component in Ampere
K2ΔI = one half of the peak to peak flux density across the component in Gauss
5. The saturation current, Isat, is the current at which the component inductance drop
by 20% (typical) at an ambient temperature. This current is determined by placing
the component in the specified ambient environment and applying a short duration
pulse current (to eliminate self-heating effect) to the component.
6. The heating current, Idc, is the DC current required to raise the component tempera-
ture by approximately 40°C. The heating current is determined by mounting the
component on a typical PCB and applying current for 30 minutes. The temperature is
measured by placing the thermocouple on top of the unit under test. Take note that
the components’ performance varires depending on the system condition. It is sug-
gested that the component be tested at the system level, to verify the temperature
8. Unless otherwise specified, all testing is made at 100KHz, 0.1Vac
9. Optional Tape and Reel packaging can be ordered by adding a “T” suffix to the part
number (i.e. PG0926.223NL becomes PG0926.223NLT). Pulse complies with industry
standard tape and reel specification EIA481. The tape and reel for this product has a
width (W=32.0mm), pitch (Po=20.0mm) and depth (Ko=8.35mm).
10. The core is a conductive material so care should be taken when mounting this com-
ponent over an exposed via or if the voltage across the terminals exceeds 24V. Trickle
current through the core material may generate additional losses and potential
overheating. Please contact Pulse to discuss an alternative solution if required.
http://www.power.pulseelectronics.com/contact
power.pulseelectronics.com
P700.D (01/19)
SMT Power Inductor
Round Wire Coils - PG0926NL series
Mechanicals
Schematics
PG0926.XXXNL
.528 MAX
[13.40 MAX]
.094
[2.40]
3
1
.087
[2.20]
.528 MAX
[13.40 MAX]
PG0926.XXXNL
MFG. LOCATION
H MAX.
X (refer to table below)
2
3
DATE
CODE
1
2
*Pin 3 is for mechanical support only
and has no internal electrical connection
.323REF
[8.20]
a
b
.079REF
[2.00]
BOTTOM VIEW
SCHEMATIC
FRONT VIEW
TOP VIEW
.197REF
[5.00]
Weight......................................................4.5 grams
Tape and Reel.............................................300/reel
.138REF
[3.50]
.394REF
[10.00]
.197REF
[5.00]
inched
Dimensions:
mm
+.010
Unless otherwise specified, all tolerance are
-0.25
.157REF
[4.00]
.323REF
[8.20]
SUGGESTED LAND PATTERN
(REFERENCE ONLY)
Typical Inductance vs DC Bias
3
2.5
2
.461NL@25ºC
.461NL@100ºC
.102NL@25ºC
.102NL@100ºC
.182NL@25ºC
.182NL@100ºC
.282NL@25ºC
.282NL@100ºC
1.5
1
0.5
0
0
4
8
12
16
20
24
28
32
36
40
44
48
52
56
DC Bias (A)
http://www.power.pulseelectronics.com/contact
power.pulseelectronics.com
P700.D (01/19)
SMT Power Inductor
Round Wire Coils - PG0926NL series
Typical Inductance vs DC Bias
24
22
20
18
16
14
12
10
8
.562NL@25ºC
.562NL@100ºC
.722NL@25ºC
.722NL@100ºC
.872NL@25ºC
.872NL@100ºC
.113NL@25ºC
.113NL@100ºC
.153NL@25ºC
.153NL@100ºC
.223NL@25ºC
.223NL@100ºC
6
4
2
0
0
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15 16
DC Bias (A)
For More Information
Pulse Worldwide
Headquarters
15255 Innovation Drive Ste 100
San Diego, CA 92128
U.S.A.
Pulse Europe
Pulse China Headquarters
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Pulse South Asia
3 Fraser Street
0428 DUO Tower
Singapore 189352
Pulse North Asia
1F, No.111
Xiyuan Road
Zhongli District
Taoyuan City 32057
Taiwan (R.O.C)
Pulse Electronics GmbH
Am Rottland 12
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen, P.R.
China 518057
58540 Meinerzhagen
Germany
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Tel: 86 755 33966678
Fax: 86 755 33966700
Tel: 86 21 62787060
Fax: 86 2162786973
Tel: 65 6287 8998
Fax: 65 6280 0080
Tel: 886 3 4356768
Fax: 886 3 4356820
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may
be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved.
http://www.power.pulseelectronics.com/contact
power.pulseelectronics.com
P700.D (01/19)
1
相关型号：
©2020 ICPDF网 联系我们和版权申明