PG1083.323NL [PULSE]
Round wire Coils;
| 型号： | PG1083.323NL |
| 厂家： | 
PULSE A TECHNITROL COMPANY |
| 描述： | Round wire Coils |
| 文件： | 总2页 (文件大小：856K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT Power Inductors
Round wire Coils– PG1083NL series
Inductance Range: 1.0uH to 50.0uH
Current Rating: up to 70Apk
Footprint: 21.7mm x 21.5mm Max
Height: 12.5mm Max
No Thermal Aging
RoHS Compliant
Electrical Specifications @ 25°C — Operating Temperature -40°C to +130°C 1
Saturation 5
Controlled Electrical Specs.
Current Isat
Inductance 2
@ Irated
Heating Current 6
Irated 3
Core Loss Factor 7
Size X
(REF.)
Height
(MAX.)
(A TYP)
Part Number
Idc
DCR 4
(mΩ)
MAX
Inductance
@ 0Adc
(µH 20%)
1.00
(A)
(K2)
(µH Typical)
(A TYP)
25°C
100°C
PG1083.102NL
PG1083.152NL
PG1083.222NL
PG1083.332NL
PG1083.472NL
PG1083.682NL
PG1083.103NL
PG1083.153NL
PG1083.253NL
PG1083.323NL
PG1083.503NL
0.95
1.35
1.95
2.70
4.10
6.10
8.60
12.6
21.0
27.9
45.2
40
40
34
28
26
22
17.5
14
1.4
70
52
46
37
30
65
45
37
33
24
20
18
14
12
10
40
40
34
28
26
17.9
26.8
29.5
35.4
50.4
52.1
62.6
74.1
93.9
107. 3
134.1
1.4
1.8
2.2
2.8
3.8
6.0
9.2
15.0
21.5
32.6
1.50
2.20
3.30
4.70
6.80
10.5
15.2
24.5
32.0
50.0
0.417
0.098
[2.50]
[10.6]
BOTTOM
VIEW A
26
22
22.5
18.5
14.5
12.5
10.0
17.5
14.0
11.0
9.0
7.4
0.492
[12.50]
0.054
[1.40]
BOTTOM
VIEW B
11
9
7.4
8.5
Notes:
1. Actual temperature of the component during system operation (ambient plus temperature rise) must be within the
standard operating range.
2. Inductance at Irated is a typical inductance value for the component taken at rated current.
3. The rated current as listed is either the saturation current (@ 25°C) or the heating current depending on which value
is lower.
the components’ performance varies depending on the system condition. It is suggested that the
component be tested at the system level, to verify the temperature rise of the component during
system operation.
7. Core loss approximation is based on published core data (at 100°C):
Core Loss = K1 * (f) 1.378 * (K2*ΔI) 2.864 in mW
4. The DCR of the part is measured at an ambient temperature of 20°C 3°C from point a to b as shown below on the
mechanical drawing.
K1 = 1.01E-9
f = switching frequency in KHz
5. The saturation current, Isat, is the current at which the component inductance drop by 20% (typical) at an ambient
temperature. This current is determined by placing the component in the specified ambient environment and applying
a short duration pulse current (to eliminate self-heating effect) to the component.
6. The heating current, Idc, is the DC current required to raise the component temperature by approximately 40°C. The
heating current is determined by mounting the component on a typical PCB and applying current for 30 minutes. The
temperature is measured by placing the thermocouple on top of the unit under test. Take note that the components’
performance varies depending on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
K1 & K2 = core loss factors
ΔI= delta I across the component in Ampere
K2*ΔI=one half of the peak to peak flux density across the component in Gauss
8. Unless otherwise specified, all testing is made at 100kHz, 0.1Vac
9. Optional Tape & Reel packaging can be ordered by adding a “T” suffix to the part number (i.e.
PG1083.682NL becomes PG1083.682NLT). Pulse complies with industry standard tape and reel
specification EIA481. The tape and reel for this product has a width (W=44.0mm), pitch (Po=32.0mm).
The depth (Ko) has two types: 1) 10.6 mm for parts with height of 10.6mm max, 120 pieces/reel; 2)
12.9mm for the parts of 12.5mm max, 100 pieces/reel.
Mechanicals
Schematic
(.571[14.50])
(.571[14.50])
PG1083.XXXNL
SIZE X
SIZE X
1
.854MAX
[21.70]
.091[2.30]MIN
.091[2.30]MIN
1
2
2
1
2
3
.846MAX
[21.50]
PG1083.XXXNL
DATE CODE CTRY MFG
(.094[2.40])
(.094[2.40])
3
3
(.098[2.50])
(.098[2.50])
BOTTOM VIEW A
BOTTOM VIEW B
Weight..........................18.6 grams
Tape and Reel....................100/tray
TOP VIEW
.571[14.50]
.197[5.00]
Inches
Dimensions:
mm
HEIGHT MAX.
.157[4.00]
d
.006[.15]
a
b
0.01
0,25
.689[17.50]
Unless otherwise specified, all tolerences are
.157[4.0]
.157[4.00]
SUGGESTED LAND PAT TERN
1
pulseelectronics.com
P716.A (3/13)
SMT Power Inductors
Round wire Coils– PG1083NL series
7\SLFDOꢋ,QGXFWDQFHꢋ96ꢋ'&ꢋELDV
ꢉꢁꢀ
682NL@100C
ꢈꢁꢀ
682NL@25C
ꢇꢁꢀ
472NL@100C
ꢆꢁꢀ
ꢅꢁꢀ
472NL@25C
332NL@100C
ꢄꢁꢀ
332NL@25C
222NL@100C
ꢃꢁꢀ
222NL@25C
152NL@25C
152NL@100C
102NL@25C
ꢂꢁꢀ
102NL@100C
ꢀꢁꢀ
ꢀ
ꢂꢀ
ꢃꢀ
ꢄꢀ
ꢅꢀ
ꢆꢀ
ꢇꢀ
ꢈꢀ
ꢉꢀ
ꢊꢀ
'&ꢋ%LDVꢋꢌ$ꢍ
7\SLFDOꢈ,QGXFWDQFHꢈ96ꢈ'&ꢈELDV
ꢇꢀꢁꢀ
503NL@100C
ꢆꢀꢁꢀ
ꢅꢀꢁꢀ
ꢄꢀꢁꢀ
ꢃꢀꢁꢀ
ꢂꢀꢁꢀ
ꢀꢁꢀ
503NL@25C
323NL@100C
323NL@25C
253NL@100C
253NL@25C
153NL@100C
103NL@100C
153NL@25C
103NL@25C
ꢀ
ꢆ
ꢂꢀ
ꢂꢆ
ꢃꢀ
ꢃꢆ
ꢄꢀ
'&ꢈ%LDVꢈꢉ$ꢊ
For More Information
Pulse Worldwide
Headquarters
Pulse Europe
Zeppelinstrasse 15
71083 Herrenberg
Germany
Pulse China Headquarters
B402, Shenzhen Academy of
Aerospace Technology Bldg.
10th Kejinan Road
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Pulse South Asia
135 Joo Seng Road
#03-02
PM Industrial Bldg.
Singapore 368363
Pulse North Asia
3F No. 198, Zhongyuan Road
Zhongli City
Taoyuan County (32068)
Taiwan
12220 World Trade Drive
San Diego, CA 92128
U.S.A.
High-Tech Zone
Nanshan District
Shenzen, PR China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 7032 7806 0
Fax: 49 7032 7806 12
Tel: 86 21 62787060
Fax: 86 2162786973
Tel: 65 6287 8998
Fax: 65 6287 8998
Tel: 886 3 4356768
Fax: 886 3 4356823
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2013. Pulse Electronics, Inc. All rights reserved.
2
pulseelectronics.com
P716.A (3/13)
相关型号：
PG108R
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 1.0 Ampere)
PANJIT
©2020 ICPDF网 联系我们和版权申明