PGL6215.131HLT [PULSE]
SMT Power Inductors;
| 型号： | PGL6215.131HLT |
| 厂家： | 
PULSE A TECHNITROL COMPANY |
| 描述： | SMT Power Inductors |
| 文件： | 总4页 (文件大小：1877K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT Power Inductors
Power Beads - PGL6215.XXXHLT Series
Current Rating: Over 125Apk
Inductance Range: 105nH to 200nH
Height: 12.0mm Max
Footprint: 12.0mm x 6.0mm Max
Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C 7
Saturation Current5
(A TYP)
Inductance1
@ 0ADC
Inductance2
@Irated
Irated3
DCR (1-3)
DCR (1-3)
Heating Current6
(A TYP)
Part
Number
(ADC)
(
+/- 10%
)
(
+ 10%/-20%)
(nH +/- 15%)
(nH TYP)
25°C
125
100°C
106
PGL6215.111HLT
PGL6215.121HLT
PGL6215.131HLT
PGL6215.151HLT
PGL6215.171HLT
PGL6215.201HLT
105
117
130
150
170
200
105
117
130
140
119
140
77
77
77
85
70
60
106
100
85
70
60
90
82
75
60
51
0.125 mOhm 0.45 mOhm
77
NOTES:
1. Inductance measured at 100kHz, 100mVrms.
7. In high volt*time applications, additional heating in the component can occur due
to core losses in the inductor which may neccessitate derating the current in order
to limit the temperature rise of the component. To determine the approximate total
losses (or temperature rise) for a given application, the coreloss and temperature rise
curves can be used.
2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.
3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat-
ing current depending on which value is lower.
2.
4. The nominal DCR is measured at point
drawing.
, as shown below on the mechanical
8. Parts with the HLT suffix are sold in tape and reel packaging. Pulse complies to
industry standard tape and reel specification EIA-481.
5. The saturation current is the typical current which causes the inductance to drop by
20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by
placing the component in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating effects) to the component.
6. The heating current is the DC current which causes the part temperature to increase by
approximately 40°C when used in a typical application.
The tape and reel for this product has a width (W=16mm), pitch (Po=12mm) and depth
(Ko=6.8mm). Samples of these parts can be ordered by removing the HLT suffix and
replacing with HL.
9. The temperature of the component (ambient plus temperature rise) must be within
the stated operating temperature range.
10. Sample Value only. Guaranteed by Design and not tested in production
Schematic
Mechanical
PGL6215.XXXHLT
PGL6215.XXXHLT
DATE CODE CTRY MFG
1
4
2
3
6.0 MAX
12.0 MAX
12.0 MAX
0.10
4SURFACES
1
2
3
4
Weight:
2.74grms
320/ Reel
DCR MEASURE POINTS
(0.9)
Tape &Reel:
(1.05)
7.1
4.1
3.1 0.3
Dimensions:
mm
3.1
Unless otherwise specified ,
all tolerances are 0.25
1
2
3
4
1.0
12.2
1.4 0.3
5.4 0.4
P911.A (06/21)
PulseElectronics.com
1
SMT Power Inductors
Power Beads - PGL6215.XXXHLT Series
TAPE & REEL INFO
CIRCULAR HOLES
PIN 1 INDICATOR SIDE
P1
W
SURFACE MOUNTING TYPE, REEL/TAPE LIST
REEL SIZE (mm)
0.30 P1 0.1
24.0 12.0
QTY
PCS/REEL
320
TYPE
W
PGL6215.XXXHLT
PGL6215.XXXHLT, L vs I, Curve 25°C
P911.A (06/21)
PulseElectronics.com
2
SMT Power Inductors
Power Beads - PGL6215.XXXHLT Series
PGL215.XXXHLT, L vs I, Curve 100°C
PGL6215.XXXHLT, Core Loss
P911.A (06/21)
PulseElectronics.com
3
SMT Power Inductors
Power Beads - PGL6215.XXXHLT Series
PGL6215.XXHLT Temp Rise vs Power Dissipation
For More Information:
Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2021. Pulse Electronics, Inc. All rights reserved.
P911.A (06/21)
PulseElectronics.com
4
相关型号：
©2020 ICPDF网 联系我们和版权申明