PM5430.332NLT [PULSE]
High Current Composite Inductor;
| 型号： | PM5430.332NLT |
| 厂家： | 
PULSE A TECHNITROL COMPANY |
| 描述： | High Current Composite Inductor |
| 文件： | 总2页 (文件大小：443K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SMT Power Inductor
High Current Composite Inductor - PA5430.XXXNLT and PM5430.XXXNLT
Height: 3.1mm Max
I
A
9
4
T
9
F
Footprint: 4.35mm x 4.35mm Max
Current Rating: up to 6.6Apk
Inductance Range: 3.3uH to 6.8uH
High current, low DCR, and high efficiency
High reliability
Minimized acoustic noise and minimized leakage flux noise
Available in Commercial (PA5430) and Automotive
(PM5430) grades
Electrical Specifications @ 25°C, Operating Temperature Range -55°C to +155°C
Rated3
Current
Inductance
100KHz, 0.1V
Part Number
DC Resistance
Isat2
SRF
Commerical
PA5430.332NLT
PA5430.472NLT
PA5430.682NLT
Automotive6
PM5430.332NLT
PM5430.472NLT
PM5430.682NLT
uH 20ꢀ
3.3
A
mΩ MAX.
28.6
A MAX
5.5
MHz
43
6.6
5.1
3.9
4.7
44.1
4.5
36
6.8
74.1
3.6
29
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
2. The saturation current is the current at which the initial inductance is guaranteed to
drop by no more than 40%.
3. The rated current is the DC current required to raise the component temperature by
approximately 40�C. Take note that the components’ performanc varies depending
on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
4. The part temperature (ambient+temp rise) should not exceed 155�C under worst
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application.
5. Parts shown in bold are standard catalog parts and are available through sample
stock and distribution. Parts in lighter font are available but are not necessarily held
in sample stock or distribution and lead times may be longer. Please contact Pulse
for availablity.
6. The PM5430.XXXNLT part numbers are AEC-Q200 and IATF16949 certified. The
inductance and mechanical dimensions are 100% tested in production but do not
necessarily meet a product capability index (Cpk) >1.33 and therefore may not strictly
conform to PPAP.
7. Special Characteristics
PulseElectronics.com
P900.A (01/21)
1
SMT Power Inductor
High Current Composite Inductor - PA5430.XXXNLT and PM5430.XXXNLT
Mechanical
PA5430/PM5430.XXXNLT and PA5431.XXXNLT
D
A
C
H
E
XXXNL
ꢀ
D/C
B
F
FINAL LAYOUT
SUGGESTED PAD LAYOUT
Series
A
B
C
D
E
F
L
G
H
3.4 0.3
1.6 0.3
3.4 (REF)
1.4 (REF)
3.8 (REF)
4.1 0.25
4.1 0.25
2.8 0.3
0.88 0.3
PA5430/PM5430
All Dimensions in mm.
TAPE & REEL INFO
SURFACE MOUNTING TYPE, REEL/TAPE LIST
REEL SIZE (mm) TAPE SIZE (mm)
QTY
Series
A
G
P1
8
W
12
K0
PCS/REEL
2000
PA5430/PM5430
Ø330
12.4
3.3
For More Information:
Americas - prodinfo_power@pulseelectronics.com | Europe - power-apps-europe@pulseelectronics.com | Asia - power-apps-asia@pulseelectronics.com
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be
trademarks or registered trademarks of their respective owners. © Copyright, 2020. Pulse Electronics, Inc. All rights reserved.
PulseElectronics.com
P900.A (01/21)
2
相关型号：
©2020 ICPDF网 联系我们和版权申明