电子元器件数据表 IC PDF查询
English 中文版
  品牌   我要上传
型号:  
描述:
V72C24H150BN2  VSD-16XCC-FA1  V72C24M150BN  V72C15T150BL3  V72C15M150BN  V72C24H150BS3  V72C15T150BS  VSD-20X16-LU1  VSD-16XCC-CA1  VSD-16XCC-TU1  
CT1775 CT1775 Universal MacAir/1553 Dumb RTU Hybrid
型号:   CT1775
PDF文件: 下载PDF文件   鼠标右键选目标另存为
网页直接浏览   不需安装PDF阅读软件
在线打开PDF文件   需安装PDF阅读软件
描述:   CT1775 Universal MacAir/1553 Dumb RTU Hybrid
文件大小 :   184 K    14 页
Logo:   
品牌   AEROFLEX [ AEROFLEX CIRCUIT TECHNOLOGY ]
购买 :   
  浏览型号CT1775的Datasheet PDF文件第2页 浏览型号CT1775的Datasheet PDF文件第3页 浏览型号CT1775的Datasheet PDF文件第4页 浏览型号CT1775的Datasheet PDF文件第5页 浏览型号CT1775的Datasheet PDF文件第6页 浏览型号CT1775的Datasheet PDF文件第7页 浏览型号CT1775的Datasheet PDF文件第8页 浏览型号CT1775的Datasheet PDF文件第9页  
100%
CT1775
Universal MacAir/1553 Dumb RTU Hybrid
PRELIMINARY DATA SHEET
www.aeroflex.com/Avionics
FEATURES
CT1775 Replaces DDC BUS-65201
Includes:
- Universal Transceiver
- Encoder/decoder
- Dual Rank I/O Registers
- Fail-safe Timer
- Clock Oscillator
Simple Controls for Single or Dual Redundant Data Bus Configurations
Provides Flags for:
- Own Address (With Parity)
- Mode Code
- Broadcast
- Time Out
- Valid Word
- Sync Type
16 Bit or 8 Bit 3-State
- Parallel I/O and Serial Out
Wraparound Built-In Test
MIL-PRF-38534 Compliant Circuits Available
Packaging – Hermetic Metal
- 68 Pin, 1.85" x 1.6" x .19" Plug-In Type Package
DESCRIPTION
The CT1775 Universal MACAIR/1553 Dumb Remote Terminal Unit (RTU) consists of a transceiver, and encoder/decoder, control
logic, dual rank I/O registers and internal clock oscillator packaged in a 1.6" x 1.9" hermetic hybrid. It provides all the functions
required to interface between a MACAIR (sinusodial) or MIL-STD-1553 (Trapezoidal) serial MUX data bus and a subsystem parallel
3-state data highway. Utilizing several ASIC ICs, the CT1775 provides sufficient handshaking, control and data lines to permit
versatile operation as a remote terminal, a bus controller or a bus monitor, in either single or dual redundant data bus configurations.
As a transmitter, the CT1775 accepts 8 bit or 16 bit parallel date from the subsystem, and outputs serial Manchester II coded
Command, Status or Data words, under subsystem control. As a receiver, it accepts serial MIL-STD-1553 or MACAIR transmissions
and transfers all Command, Status and Data words to the 8 bit or 16 bit data highway, under subsystem control. The CT1775 also
provides flags to the subsystem when Broadcast, Mode Code, and Own Address (with parity) commands are decoded.
The CT1775 contains a terminal fail-safe timeout circuit which flags message lengths exceeding 768µs, and terminates serial data
transmission. Wraparound selftest is initiated by a control line which causes the encoder serial output to be connected to the decoder
input. The CT1775 provides a serial output of decoded words, thus allowing Command Word look ahead, for the fastest terminal
response.
SCDCT1775 Rev B
首页 - - 友情链接
Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM

粤公网安备 44030402000629号


粤ICP备13051289号-7