Unity Opto Technology Co., Ltd.
The LED Strip signage light module is comprised of a linear
array of solid state light emitting diodes ( LEDs ) mounted
on an elongated printed circuit board. This board is encased
inside a translucent plastic hosing, which is sealed at its two
ends.The LED Strip unit has interconnects at each end, which
allows for easy modular interconnectivity, either to a power
source or an adjacent LED Strip unit.
LED-based solid state lighting module
Long operation life and low power requirement
High reliability in wide operating temp.
Wide viewing angle and uniform appearance
Easy modular interconnectivity
High luminous intensity
A series of these LED Strip units can be mounted end-to-end
along the roof or edge of a building to produce a bright,
continuous contour of light, similar to neon, but consuming
only a fraction of the power that neon consumes.
Focused Reading & Task Lighting
Uninterrupted Emergency Lighting
Concealed Accent Lighting
LED Strip is made with an advanced optical grade high
strength acrylic lens, which offers superior high temperature
and moisture resistance performance in outdoor environments.
The high strength acrylic extrusion lens material is tough and
impact resistant. In addition, the high strength arcylic lens
is doped with UV-a and UV-b inhibitors to reduce the effects
of long-term exposure to direct sunlight.
Available with Low Voltage Disconnect
Battery Protection Circuit
Special Operating Voltages
Choice of Narrow (15
C) , Medium (30
Wide Angle (120
LED Strip is available in a variety of colors：red, yellow,
orange, green, and blue. It is easily installed on any surface
with minimal surface penetration and is built to withstand
the harshest environments.
The LEDStrip is made in custom lengths to order, and all
fittings can be nearly concealed. Thus, each installation
is customized for a location.
|首页 - - 友情链接|
|Copyright© 2001 - 2014 ICPDF All Rights Reserved ICPDF.COM